Professional Documents
Culture Documents
Compressor
Compressor
------------------------
Version: 2.08
Build date: March 13, 2019
* Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY LAW, FABFILTER, FREDERIK SLIJKERMAN AND FLORIS
KLINKERT, AUTHORS OF THIS FABFILTER PRODUCT, SPECIFICALLY DISCLAIM ALL WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF NON-
INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. FABFILTER,
FREDERIK SLIJKERMAN AND FLORIS KLINKERT, DO NOT WARRANT THAT THE SOFTWARE WILL MEET
YOUR REQUIREMENTS OR THAT THE SOFTWARE WILL OPERATE ERROR-FREE OR UNINTERRUPTED. TO
THE MAXIMUM EXTENT PERMITTED BY LAW, FABFILTER, FREDERIK SLIJKERMAN AND FLORIS
KLINKERT, SHALL NOT BE LIABLE FOR ANY DAMAGE A FABFILTER PRODUCT MAY CAUSE OR
DAMAGES THAT MAY ARISE OUT OF THE USE OF A FABFILTER PRODUCT OR INABILITY TO USE A
FABFILTER PRODUCT, INCLUDING BUT NOT LIMITED TO SPECIAL, INCIDENTAL, CONSEQUENTIAL
OR OTHER DAMAGES. IN NO EVENT FABFILTER, FREDERIK SLIJKERMAN OR FLORIS KLINKERT
WILL BE LIABLE FOR AN AMOUNT IN EXCESS OF TWO HUNDRED FIFTY EUROS.
Fixed interface size issues in Cubase 10 when using 150% High DPI scaling on
Windows.
Added visualization of the plug-in input and output levels on Pro Tools control
surfaces.
Fixed a bug that could cause the plug-in to stay in a triggered state if Enable
MIDI is turned off while the plug-in is currently triggering on a MIDI note.
Updated plug-in for full compatibility with Mac hosts built specifically for macOS
10.14 (Mojave), such as Logic Pro 10.4.4, running under macOS 10.14.0 or 10.14.1.
Previously this could lead to an all-black plugin interface.
Improved the way settings are saved when multiple plug-in instances are open to
make sure the last setting that was chosen is saved correctly for new instances.
Added support for 300% scaling on 8K displays (High DPI) on Windows.
Fixed an issue that could cause incorrect scaling of the plug-in interface in
Cubase 10 or Live 10 on High DPI displays in combination with certain graphics
drivers on Windows.
Added a Refresh item to the Options submenu of the presets menu: this makes it
possible to manually refresh the menu and the V1 Preset Folder submenu after a
preset has been saved by an earlier plug-in version.
Fixed a bug on Mac that could cause program changes received by one plug-in to be
forwarded to other FabFilter plug-in instances.
The VST 2.4 plug-in will now automatically adapt its channel layout to match the
audio/track it is placed on. Note that the separate "(Mono)" version of the plug-in
is still included for backwards compatibility.
Fixed issues with key stroke stealing on Windows 10 when using the Avid S6 control
surface.
Updated the AAX plug-in to enable the dynamics display on the Avid S6 console.
Improved Avid S6 page tables mappings in the AAX plug-in, now more closely
following Avid's conventions for a better workflow.
Fixed a bug that caused the plug-in interface to use more memory than needed if the
display was not enabled.
Added a workaround for a bug in Ableton Live that causes latency compensation to
work incorrectly when loading a session that sets the parameters such that the
plug-in doesn't have latency, in combination with a default preset that does
introduce latency. This only occurred with the VST plugin format and caused Live to
use the latency from the default preset.
Fixed issues with macOS Sierra on the new MacBook Pro (Late 2016) with Touch Bar,
that could cause the host to become unresponsive or crash after exiting Full Screen
mode or closing a plug-in window.
Fixed a bug that caused text with multiple lines (such as the help hint label) to
miss the last line of text on macOS Sierra (10.12).
Improved mouse wheel behavior on Windows with stepped parameters, e.g. on drop-down
buttons.
Added a workaround for a bug in macOS Sierra (10.12) that prevented the help file
from opening correctly. The help file is now displayed in a web browser rather than
the Help Viewer.
Fixed an issue in the AAX plug-ins that could cause loss of existing automation
data when writing automation in Automation Preview mode, for example when creating
or deleting bands in Pro-Q 2.
Fixed a bug in the AAX plug-ins that caused parameter values that are very close to
the default value to remain at the default value when loading a session.
Fixed a bug in the VST3 plug-ins when restoring a session in FL Studio 12 using a
custom display scaling factor such as 125%: the plugin window could end up at the
wrong size.
Fixed a bug in the VST3 version of the plug-in that could cause a crash in FL
Studio and possibly other hosts after removing a plug-in from a session or closing
a session.
Fixed possible dropouts in the real-time level display when using a large host
buffer size such as 4096.
Fixed a bug in the AAX and RTAS versions of the plug-in that prevented the Wet Gain
and Dry Gain parameters to be available for mapping by Pro Tools.
Fixed a bug that could cause the side chain EQ Mid band to stay enabled, even while
the whole Side Chain section was disabled.
Fixed a bug in the AAX plug-in that caused it to show up as '2' in Mini track view
in Pro Tools, instead of 'C'.
The plug-in can now operate at any sample rate, without a maximum.
Improved Avid control surface page tables, now including support for the S6 range.
Fixed an issue in the AAX plug-in when using it as 'Default Dynamics' in Pro Tools
on a stereo track (creating a multi-mono version instead of stereo).
Fixed possible crashes when using the plug-in in Final Cut Pro X (with the
Background Render option enabled).
In Pro Tools mini track view, Pro-C will now show its distinctive letter 'C'
instead of the first letter 'P'.
When Auto Release is enabled, the release knob now shows its values in a percentage
range instead of milliseconds.
Introducing custom Knee, variable from hard knee to a 72 dB soft knee, which
enables you to achieve saturation-like compression effects.
Introducing Range setting, which limits the maximum applied gain change.
Introducing up to 4x Oversampling.
Fully redesigned user interface, including optional knee and level displays with a
variable range from 9 dB to 90 dB.
Introducing Full Screen mode, offering a large level display and side-chain EQ
controller.
Highly improved level meters, with peak and loudness level visualization. The
loudness level complies with the Momentary mode of the EBU R128 / ITU-R 1770
standards.
* Windows Installation
The installer will try to detect the correct VST 2 plug-ins folder on your
computer, but you may need to select it yourself for your preferred host. After the
installation is complete, you can always manually copy the VST 2 plug-in to the
plug-ins folder for your host. The VST 2 plugin file name is C:\Program Files\
FabFilter\Pro-C 2\FabFilter Pro-C 2.dll.
* macOS Installation
Double-click the downloaded disk image and double-click the installer package that
it contains to install the VST, VST 3, AAX and AU versions of FabFilter Pro-C 2
(both 32-bit and 64-bit). The plug-ins will be installed in the global audio
library (/Library/Audio/Plug-Ins).
If you already own one or more FabFilter plug-ins, you can log into your online
FabFilter account to buy FabFilter Pro-C 2 with a discount!
www.fabfilter.com/shop
www.fabfilter.com/myaccount
* Support
Visit the Support section on our web site for tips, software updates and the
FabFilter Users forum. You can also e-mail us directly for questions and technical
support at info@fabfilter.com.
www.fabfilter.com/support