Professional Documents
Culture Documents
Screw Press CATALOGUE
Screw Press CATALOGUE
TAJHIZ SANAAT
BARAN TECHNICAL BROCHURE
ENVIRONMENT & The Screw Press is a dewatering device in which a screw rotates inside a cylindri-
ENERGY TECHNOLOGY
cal perforated screen ( V-Wire technology )and normally constructed of stainless
steel AISI 304. Screen sleeve from 0.2 to 0.5 mm perforation are standard.
Material entering the top hopper is subjected to gradually increasing pressure as it
move toward the exit if the press, forcing the liquid phase to extrude through the
screen. Dewatering of sludge or manure has proven successful over a wide range
of application. Final pressing is control by a angled pipe that provide adjustment of
moisture content by design of angled pipe length.
The pitch and interrupted flight screw design prevent jamming, while heavy duty
gearbox (Bevel-Helical) selection assures long life.
Application
Contact Us Slaughterhouse, Brewing Processing Glass Making
Poultry, Meat and Industries
Seafood Processing Chemical Processing
Pulp & Paper
Fruit & Vegetables Municipal Waste Industries
Processing Treatment Plant
Phone: +98-21-55193294
+98-21-55192357-8 Chips, Snack & Industrial Waste
Fax: +98-21-55192357 Frozen Food Treatment Plant
E-mail:info@baran-eet.com Processing
Baran™ Screw Press
TAJHIZ SANAAT
BARAN DIMENTIONS & TECHNICAL DATA
ENVIRONMENT & In the inlet compartment a hopper is installed to feed the sludge to the screw. . One
ENERGY TECHNOLOGY special bearing unit is installed at end of the shaft to prevent any unbalancing.
In order to avoid the impact of hard objects, the torque control system has been
WWW.BARAN-EET.COM considered.
In cases where it is deemed required a high pressure jet spray can be installed in
the top of screen for cleaning.
Schematic
of Flow