Professional Documents
Culture Documents
Huawei OLT Configuration Step by Step Guide 20201 - Smart Network Geek
Huawei OLT Configuration Step by Step Guide 20201 - Smart Network Geek
Menu
104.21.91.118
Huawei is a well-known brand for networking equipment like
switch routers and lots of products. If you are planning to deploy
your secured network for your ISP telecom operator you need
OLT (Optical Line Terminal). Huawei olt is the best solution for
your network. Do you have a Huawei OLT, do you face problems
with the initial configuration?
Don’t worry, in this article, you will learn details about Huawei olt
configuration step by step guide also Huawei OLT configuration
commands.
Let’s start
ETH port is designed only for management; you can’t use this
port for passing traffic to customers. This ETH port is isolated
from other ports.
MA5608T>
MA5608T> enable
MA5608T#config
First, we will check how many service boards are detected by OLT
and confirm those boards for workable.
MA5608T>
MA5608T> enable
MA5608T# config
104.21.91.118
MA5608T(config)# display board 0
MA5608T(config)# save
First, we will create VLAN 100 and assign this VLAN 100 to uplink
port 3.
MA5608T>enable
MA5608T#config
MA5608T(config)#quit
MA5608T#save
MA5608T>enable
MA5608T#config
All types of GPON OLT like VSOL Gpon OLT need to create DBA,
LINE, Service profiles.
In this step, we will enable pon ports for automatically found onu.
When you connect onu to your network ONU will automatically
be recognized by OLT.
Assume we are using 5608T OLT with GPBD Service board where
has 16 pon ports. We will enable pon port using the below
command
MA5608T>enable
MA5608T#config
MA5608T(config-if-gpon-0/1)#display ont autofind 0
104.21.91.118
Using this command you can check if there any onu is attached
to the olt
2. DBA Profile
MA5608T>enable
MA5608T#config
3. Line Profile
In this step we will create a line for vlan 101 . Here profile ID will
10 and profile name line_vlan_101
MA5608T>enable
MA5608T#config
104.21.91.118
MA5608T(config)#vlan 101 smart
MA5608T(config)#quit
MA5608T#save
MA5608T>enable
MA5608T#config
MA5608T(config-gpon-lineprofile-10)#tcont 1 dba-profile-id 10
MA5608T(config-gpon-lineprofile-10)#commit
4. Service Profile
104.21.91.118
In this step we will create a service profile for vlan 101.
Let’s start
MA5608T(config-gpon-srvprofile-10)#ont-port eth 1
MA5608T(config-gpon-srvprofile-10)#commit
For adding ont / onu to huawei olt first need to find out onu
seriel number using below command
MA5608T>enable 104.21.91.118
MA5608T#config
using this command we find out onu seriel number and the
number is 48575443522C499D
MA5608T>enable
MA5608T#config
MA5608T#config
MA5608T(config)#quit
MA5608T#save
Conclusion
Huawei Gpon OLT configuration from command line interface its
little bit difficult. But this article we described Huawei OLT
Configuration step by step. Now you can easily configure huawei
olt configuration. If you have any query regarding huawei olt
configuration you may contact with us.
Leave a Comment
Name *
Email *
Website
104.21.91.118