Professional Documents
Culture Documents
Truevis vg640
Truevis vg640
Truevis vg640
Page in this
Manual name Affected page Title
manual
P. 4 2. Included Items P. 2
Step 5 : Adjusting the Ink Tube and Affixing a Label
Setup Guide P. 15 P. 2
(Only When Using Four Colors)
P. 19 to P. 25 Step 8 : Ink Filling P. 3
P. 83, etc. (Precaution When Detaching the Drain Bottle) P. 11
P. 15 Main Menu P. 11
P. 57 Step 6 : Starting Output P. 12
P. 67 Out-of-ink Warnings P. 13
P. 86 Timing of Print Head Care and Maintenance P. 13, P. 15
P. 89 Manual Cleaning P. 14
USER’S MANUAL
New addition Damper Cleaning P. 16
P. 97 Super Cleaning P. 19
P. 170 to P. 175 Procedure from Preparing to Move to Reinstallation P. 21
P. 191 to P. 192 A Message Appears P. 22
P. 193 to P. 196 An Error Message Appears P. 22
P. 202 Specifications P. 24
R2-160617
Thank you very much for purchasing this product.
• To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read
through this manual completely and store it in a safe location.
• Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
• The specifications of this product and the contents of this manual are subject to change without notice.
• This manual and the product have been prepared and tested as much as possible. If you find any misprints or
errors, please inform Roland DG Corp.
• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur through use
of this product, regardless of any failure to perform on the part of this product.
• Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur with respect
to any article made using this product.
Contents.........................................................................................................1
Additions and Changes to the Setup Guide...................................................2
Addition: 2. Included Items (P. 4)................................................................................................. 2
Change: Adjusting the Ink Tube and Affixing a Label (P. 15)............................................. 2
Change: Ink Filling (P. 19 to P. 25)................................................................................................. 3
Additions and Changes to the User's Manual.............................................. 11
Addition: Precaution When Detaching the Drain Bottle (P. 83, etc.).............................11
Addition: Main Menu (P. 14 to P. 17)..........................................................................................11
Addition: Starting Output (P. 57)................................................................................................12
Addition: Out-of-ink Warnings (P. 67).......................................................................................13
Change: When to Perform Manual Cleaning (P. 86 and P. 89)..........................................13
Addition and Change: Damper Cleaning (P. 86, P. 96, and P. 97)....................................15
Addition: Procedure from Preparing to Move to Reinstallation (P. 170 to P. 175)....21
Addition: A Message Appears (P. 191 to P. 192)....................................................................22
Addition: An Error Message Appears (P. 193 to P. 196).......................................................22
Addition and Correction: Specifications (P. 202)..................................................................24
1
Additions and Changes to the Setup Guide
Included item
* With the factory default settings, this label is affixed to the platen at the location where the
front cover opens.
Change: Adjusting the Ink Tube and Affixing a Label (P. 15)
The title on P. 15 has been changed from "Step 5: Adjusting the Ink Tube and Affixing a Label
(Only When Using Four Colors)" to "Step 5: Adjusting the Ink Tube and Affixing a Label (When
Using Eight or Four Colors)" and the details have been changed as shown below.
Step 5: Adjusting the Ink Tube and Affixing a Label (When Using Eight or Four Colors)
This work is required when using the machine with four colors (CMYK). This work must be per-
formed by a suitably qualified service technician. Never attempt to perform this work yourself.
* If you are using this machine with eight colors (CMYKLcLmLkW), only perform the work
under "Affixing a label."
* If you are using the machine with seven colors (CMYKLcLmLk), proceed to "Step 6: Con-
necting the Cables."
Affixing a label
This work is required when using the machine with eight colors (CMYKLcLmLkW) or with four
colors (CMYK).
2
Additions and Changes to the Setup Guide
IMPORTANT
First use cleaning liquid to clean the print heads, and then fill the printer with each color of ink.
• Be sure to use new TR cleaning liquid pouches and ink pouches.
• Never, under any circumstances, use anything other than the specified type of ink or cleaning liquid.
• The TR cleaning liquid pouches (2) that are included with the machine are used on P. 20, "2.
Clean the print heads using TR cleaning liquid."
• You must purchase the TR cleaning liquid pouch to be used on P. 24, "4. Fill the machine with TR
cleaning liquid." separately. Purchase them from your authorized Roland DG Corp. dealer.
Items purchased separately Ink pouches (each color), TR cleaning liquid pouch (1)
Cyan (C)
Light cyan (Lc)
Magenta (M)
Name to select Light magenta (Lm) White (W)
Yellow (Y)
Light black (Lk)
Black (K)
TrueVIS LkW
TrueVIS 7C
TrueVIS 4C
If the ink type is incorrect, select [NO], and then press [ENTER] to start again from step A.
3
Additions and Changes to the Setup Guide
C Make sure the drain bottle is installed, and then press [ENTER].
P. 13, "Step 3: Installing the Drain Bottle"
INSTALL
DRAIN BOTTLE
The screen shown below appears, and then the machine starts the preparations for
the ink filling. The (approximate) remaining time for the procedure is displayed on the
screen. (The display shown below is an example. "20:00" = "20 minutes and 00 seconds")
FILLING INK...
>>>>> 20:00
MEMO
If the screen shown below appears here, pouch trays remain in the ink slots or in the
cleaning liquid slot. Remove all the pouch trays.
REMOVE CARTRIDGE
12345678
Hook
4
Additions and Changes to the Setup Guide
B When the screen shown below appears, set the pouch tray in which you have
set the TR cleaning liquid pouch in the slot whose number is displayed.
8 colors (CMYKLcLmLkW)
4 colors (CMYK)
7 colors (CMYKLcLmLk)
4 4
YE YE
3 3
CL
* The illustration shows the setting of the pouch tray when eight or seven colors are used.
FILLING INK...
>>>>> XX:XX
C When the screen shown below appears, remove the pouch tray from the slot
whose number is displayed.
8 colors (CMYKLcLmLkW)
4 colors (CMYK)
7 colors (CMYKLcLmLk)
FILLING INK...
>>>>> XX:XX
B C
Hereafter, the screens shown in steps and are repeated.
When you repeat the "SET" and "REMOVE" operations multiple times, the flashing slot
number changes. Follow the instructions on the screen to repeat the "SET" and "REMOVE"
operations for the pouch tray whose slot number is flashing.
5
Additions and Changes to the Setup Guide
MEMO
• When setting the pouch tray: When the pouch tray is set correctly, the
number stops flashing and remains lit.
Flashing Lit
• When removing the pouch tray: When the pouch tray is removed correctly,
the number stops flashing and turns off.
Flashing Off
EMPTY
DRAIN BOTTLE
IMPORTANT
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine.
Exercise caution to prevent this fluid from soiling your hands or the floor.
CAUTION Before you detach the drain bottle, be sure to wait for the screen
to display [EMPTY DRAIN BOTTLE]. After discarding the dis-
charged fluid, promptly attach the drain bottle to the machine.
Failing to follow this procedure may cause discharged fluid to flow
out of the machine and spill, soiling your hands or the floor.
Dispose of discharged fluid properly, in accordance with the laws in effect in your locale.
Discharged fluid is flammable and contains toxic ingredients. Never attempt to incinerate dis-
charged fluid or discard it with ordinary trash. Also, do not dispose of fluid in sewer systems, rivers,
or streams. Doing so may have an adverse impact on the environment.
6
Additions and Changes to the Setup Guide
E Quickly attach the emptied drain bottle to the machine once more.
F Press [ENTER].
G Follow the instructions on the screen to repeat the "SET" and "REMOVE"
operations for the pouch tray whose slot number is flashing.
A When the screen shown below appears, remove the drain bottle and discard
the discharged fluid.
EMPTY
DRAIN BOTTLE
IMPORTANT
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine.
Exercise caution to prevent this fluid from soiling your hands or the floor.
CAUTION Before you detach the drain bottle, be sure to wait for the screen
to display [EMPTY DRAIN BOTTLE]. After discarding the dis-
charged fluid, promptly attach the drain bottle to the machine.
Failing to follow this procedure may cause discharged fluid to flow
out of the machine and spill, soiling your hands or the floor.
B Quickly attach the emptied drain bottle to the machine once more.
C Press [ENTER].
7
Additions and Changes to the Setup Guide
D Set the ink pouch for each color and the TR cleaning liquid pouch (separately
purchased item) in the pouch trays.
Also use the two pouch trays that you used in step 2. Remove the TR cleaning liquid
pouch, and then insert the ink pouch.
Hook
E Gently shake the ink pouch for each color. Shake the white ink pouch 50
times (for around 20 seconds).
If ink components precipitate, it will not be possible to print with correct colors. So that
the ink mixes well, shake the pouch tray horizontally with a stroke length of 5 cm (2 in.)
from each end of the pouch tray.
IMPORTANT
• Do not remove the ink pouches. Shake the entire pouch tray. Removing the ink pouches
may lead to the ink leaking.
• Before shaking, wipe off any ink from around the mouth of the ink pouch. If you do not
wipe off the ink, it may splatter when you shake the pouch tray.
8
Additions and Changes to the Setup Guide
F When the screen shown below appears, set the pouch tray in which you have
set an ink pouch in the ink slot whose number is flashing.
When using four colors (CMYK), set the pouch trays in the "2, 4, 6, 8" ink slots. Then, when
"1, 3, 5, 7" is displayed, set the remaining pouch trays in the remaining ink slots.
8 colors (CMYKLcLmLkW)
4 colors (CMYK)
7 colors (CMYKLcLmLk)
SET CARTRIDGE SET CARTRIDGE
12345678 2 4 6 8
FILLING INK...
>>>>> XX:XX
SET CARTRIDGE
1 3 5 7
IMPORTANT
Check the color names indicated on the ink slots and the ink pouches to set all the pouch
trays in their correct positions. Insert the pouch trays as far as they will go.
4 4
YE YE
3 3
* The illustration shows the setting of the pouch tray when eight or seven colors are used.
A When the screen shown below appears, set the pouch tray in which you have
set the TR cleaning liquid pouch in the cleaning liquid slot.
Insert the pouch trays as far as they will go.
9
Additions and Changes to the Setup Guide
FILLING INK...
>>>>> XX:XX
C When the screen shown below appears, remove the drain bottle and discard
the discharged fluid.
EMPTY
DRAIN BOTTLE
IMPORTANT
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine.
Exercise caution to prevent this fluid from soiling your hands or the floor.
CAUTION Before you detach the drain bottle, be sure to wait for the screen
to display [EMPTY DRAIN BOTTLE]. After discarding the dis-
charged fluid, promptly attach the drain bottle to the machine.
Failing to follow this procedure may cause discharged fluid to flow
out of the machine and spill, soiling your hands or the floor.
D Quickly attach the emptied drain bottle to the machine once more.
MEMO
When using four colors (CMYK), repeat steps C and D twice.
E Press [ENTER].
When the screen shown in the figure appears, filling with ink is finished.
SETUP SHEET
10
Additions and Changes to the User's Manual
Addition: Precaution When Detaching the Drain Bottle (P. 83, etc.)
The following precaution has been added regarding removing the drain bottle in situations such as when
discarding the discharged fluid.
(Affected pages: P. 83, P. 84, P. 85, P. 98, P. 105, P. 172, and P. 174)
IMPORTANT
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine.
Exercise caution to prevent this fluid from soiling your hands or the floor.
INK CONTROL
CIRCULATE INK
(*2) To the [EMPTY MODE] or the [SUPER CL.] menu
(*1) This is only displayed when you are using eight colors (CMYKLcLmLkW) or seven colors
(CMYKLcLmLk).
(*2) This is only displayed when you are using eight colors (CMYKLcLmLkW).
11
Additions and Changes to the User's Manual
• Remove just the pouch tray for the white ink, shake the pouch tray 50 times (about 20
seconds), and then reinsert this pouch tray.
• The pouch trays for colors other than white do not need to be shaken before every
operation, but be sure to shake them when installing new ones.
If ink components precipitate, it will not be possible to print with correct colors. So that the ink
mixes well, shake the pouch tray horizontally with a stroke length of 5 cm (2 in.) from each end
of the pouch tray.
The components in the white ink have a tendency to precipitate. Be sure to perform the above
operation prior to starting the day's work. The deposits may harden and cause problems including
printer malfunctions if left alone for an extended period of time.
IMPORTANT
• Do not remove the ink pouches. Shake the entire pouch tray. Removing the ink pouches
may lead to the ink leaking.
• Before shaking, wipe off any ink from around the mouth of the ink pouch. If you do not
wipe off the ink, it may splatter when you shake the pouch tray.
• When you have finished mixing the ink, reinsert the pouch tray immediately. Taking
time to reinsert the pouch tray will adversely affect the ink path.
• Even if you rarely use white ink, shake the pouch tray for the white ink 50 times (about
20 seconds) once a week.
12
Additions and Changes to the User's Manual
Lit
Indicates that ink still remains
Flashing
Indicates that ink has run out
1 2 3 4
5 6 7 8
If an ink pouch runs out, the number of
the color that has run out will flash.
When an ink pouch runs out, printing pauses (unless the factory default settings have been
changed) and a warning beep sounds.
Before Change
• Manual cleaning
Perform manual cleaning periodically according to your frequency of use.
After Change
• Manual cleaning
Perform manual cleaning periodically according to your frequency of use.
13
Additions and Changes to the User's Manual
Before Change
Monthly Cleaning
Manual Cleaning
To keep the stable printing condition at all times, perform manual cleaning once a month or more.
Manual cleaning takes approximately 10 minutes.
After Change
Weekly Cleaning
Manual Cleaning
To keep the stable printing condition at all times, perform manual cleaning once a week or more.
Manual cleaning takes approximately 10 minutes.
14
Additions and Changes to the User's Manual
Addition and Change: Damper Cleaning (P. 86, P. 96, and P. 97)
"Damper cleaning" has been added under "Care and Maintenance When Uneven Color Occurs."
As a result, the timing with which to perform "super cleaning" has been changed.
15
Additions and Changes to the User's Manual
Delete
Addition
Damper Cleaning
If uneven color issues are not resolved even after shaking the pouch trays, perform "damper clean-
ing." Uneven colors refers to the symptom of printed colors being uneven (such as the color density
being inconsistent) even when the same data is printed with the same settings.
Damper cleaning can be used to stabilize the printed colors by agitating the ink.
IMPORTANT
• Damper cleaning consumes a lot of ink, and overly frequent use may damage the print
heads themselves. Avoid using this cleaning method more than necessary.
• Whenever possible, perform damper cleaning with ink pouches that have a large amount
of remaining ink. If the ink runs out during cleaning, cleaning will stop. In this situation,
"CLEANING ERROR" will be displayed on the screen. When a cleaning error occurs, the
damper cleaning will start over again from the beginning.
""P. 22 "[CLEANING ERROR]" in this manual
Procedure
A Press [MENU].
B Press [ ] several times to display the screen shown below.
MENU
SUB MENU
C Press [ ] once, and then press [ ] several times to display the screen shown
below.
SUB MENU
INK CONTROL
16
Additions and Changes to the User's Manual
D Press [ ] once, and then press [ ] several times to display the screen shown
below.
INK CONTORL
DAMPER CL.
E Press [ ].
F Select the group of print heads to clean.
Use the table shown below to check the group that contains the color for which uneven
colors are occurring. If you cannot determine which color is the problem, perform cleaning
with both group A and group B as the target.
A B
8
colors C M Y K Lc Lm Lk Wh
7
colors C M Y K Lc Lm Lk M
4
colors C M Y K C M Y K
1
Press [ ] or [ ] to select the group of print heads that is not to be cleaned.
DAMPER CL.
AB
2
Press [ ] or [ ] to get rid of the group display.
DAMPER CL.
A
3
Repeat steps 1 and 2 to display only the group of print heads that re-
quires cleaning.
Only the displayed groups will be cleaned. If A and B are displayed, they will both be
cleaned.
G Press [ENTER].
The screen shown in the following figure appears, and then cleaning starts. The (approx-
imate) remaining time for the procedure is displayed on the screen. (The display shown
below is an example. "01:45" = "1 minute and 45 seconds")
CLEANING...
>> 01:45
17
Additions and Changes to the User's Manual
EMPTY
DRAIN BOTTLE
1
Remove the drain bottle and discard the discharged fluid.
2
Quickly attach the emptied drain bottle to the machine once more.
3
Press [ENTER].
IMPORTANT
When you remove the drain bottle, a few drops of discharged fluid may come out of the machine.
Exercise caution to prevent this fluid from soiling your hands or the floor.
CAUTION Before you detach the drain bottle, be sure to wait for the
screen to display [EMPTY DRAIN BOTTLE]. After discarding
the discharged fluid, promptly attach the drain bottle to the
machine.
Failing to follow this procedure may cause discharged fluid to flow
out of the machine and spill, soiling your hands or the floor.
Dispose of discharged fluid properly, in accordance with the laws in effect in your locale.
Discharged fluid is flammable and contains toxic ingredients. Never attempt to incinerate dis-
charged fluid or discard it with ordinary trash. Also, do not dispose of fluid in sewer systems, rivers,
or streams. Doing so may have an adverse impact on the environment.
DAMPER CL.
AB
18
Additions and Changes to the User's Manual
Before Change
Super Cleaning
In the following cases, perform "super cleaning."
• If ink discharge issues such as dot drop-out are not corrected after performing cleaning using
the cleaning function (normal, medium, powerful) or manual cleaning.
• If uneven color issues are not resolved even after shaking the pouch trays to mix the ink within
the ink pouches.
IMPORTANT
A large amount of ink will be discharged during super cleaning. Perform this operation only when
dot drop-out cannot be corrected even after performing cleaning using the other cleaning functions
(normal, medium, powerful, and manual cleaning).
After Change
Super Cleaning
In the following cases, perform "super cleaning."
• If ink discharge issues such as dot drop-out are not corrected after performing cleaning using
the cleaning function (normal, medium, powerful) or manual cleaning.
• If uneven color issues are not resolved even after performing damper cleaning.
IMPORTANT
A large amount of ink will be discharged during super cleaning. Perform this operation only when
dot drop-out or uneven colors cannot be corrected even after performing cleaning using the other
cleaning functions (normal, medium, powerful, manual, and damper cleaning).
19
Additions and Changes to the User's Manual
Before Change
After Change
20
Additions and Changes to the User's Manual
* After performing the procedure under "1. Remove any media and the blade holder.," perform
the following operations.
A Press [MENU].
B Press [ ] several times to display the screen shown below.
MENU
SUB MENU
C Press [ ] once, and then press [ ] several times to display the screen shown below.
SUB MENU
INK CONTROL
D Press [ ] once, and then press [ ] several times to display the screen shown below.
INK CONTORL
CIRCULATE INK
E Press [ENTER].
The screen shown in the following figure appears, and then the ink circulation starts. The
(approximate) remaining time for the procedure is displayed on the screen. (The display
shown below is an example. "01:45" = "1 minute and 45 seconds")
CIRCULATING INK
>> 01:45
Depending on the timing with which the ink circulation is started, the following screen may
be displayed and cleaning may start. When cleaning is complete, the ink circulation will
start, so wait for the ink circulation to complete. (The display shown below is an example.
"01:45" = "1 minute and 45 seconds")
CLEANING...
>> 01:45
INK CONTORL
CIRCULATE INK
21
Additions and Changes to the User's Manual
22
Additions and Changes to the User's Manual
The cause of the following error message has been changed in part.
Before Change
After Change
23
Additions and Changes to the User's Manual
The power consumption during sleep mode has been corrected as shown below.
Before Correction
VG-640 VG-540
Power consumption Sleep mode Four colors: 75 W Four colors: 49 W
Seven colors: 40 W Seven colors: 43 W
After Correction
VG-640 VG-540
Power consumption Sleep mode Eight colors and seven colors: 43 W
Four colors: 48 W
24