Professional Documents
Culture Documents
Bamboohub Outdoor Cladding Installation Guide
Bamboohub Outdoor Cladding Installation Guide
INTRODUCTION
Company Description
CONTACT US
is a supplier of high-quality
and durable bamboo
flooring, wood plastic
composite (WPC) cladding,
decking and accessories.
At bamboohub, we aim to
redefine perfection in all of
our products for its
premium grade and eco-
friendly nature.
We provide excellent
customer service and
competitive prices in our
products.
OUTDOOR
CLADDING INSTALLATION
OUTDOOR WALL CLADDING
CEILING INSTALLATION WITH JOIST
MATERIALS NEEDED:
EXPANSION SCREW
(6×80mm)
Used to fix the aluminum
joist to the wall
OUTDOOR
CLADDING INSTALLATION
attachment of joist
EXTERIOR WALL CLADDING
JOIST INSTALLATION
NOTE 1:
BEFORE THE INSTALLATION,
MAKE SURE THAT THE WALL IS
SMOOTH AND SOLID.
NOTE 2:
DOUBLE JOISTS ARE NEEDED AT
THE BUTT SEAM OF TWO
ADJACENT CLADDING BOARDS
SO THAT EACH BOARD IS ON ITS
OWN JOIST.
NOTE 3:
TO PROPERLY FINISH THE
CORNER, THE JOISTS AROUND
THE EDGES NEED TO BE
CONNECTED TO EACH OTHER.
OUTDOOR
CLADDING INSTALLATION
cladding installation
EXTERIOR WALL CLADDING
INSTALLATION
NOTE 1:
ALWAYS PRE-DRILL A PILOT
HOLE BEFORE SCREWING TO
AVOID DAMAGE TO WPC WALL
CLADDING
NOTE 2:
MAKE SURE THAT THERE IS A
GAP OF AT LEAST 10mm
BETWEEN THE CLADDING AND
THE FLOOR TO PROMOTE
VENTILATION AND OFFER
ROOM FOR EXPANSION AND
CONTRACTION.
STEP 1:
PUT THE FIRST PIECE OF WALL
CLADDING ON THE JOIST, THEN
FIX IT TO THE JOIST WITH
COLORED SCREWS (M4X35).
EXTERIOR WALL CLADDING
INSTALLATION
STEP 2:
Fix the cladding with self-drilling
screws (m4x25) to the joist. The
screws should be installed in the
screw groove of the cladding.
STEP 3:
Connect the second piece of cladding to the first one. Fix the cladding to the
joist with self-drilling screws. The screws should be installed in the screw
groove of the cladding.
EXTERIOR WALL CLADDING
INSTALLATION
STEP 4:
Continue the installation by
repeating step 3.
8mm
IMPORTANT: The butt seam
between two adjacent cladding
boards should be at least 8 mm
wide to promote ventilation and
offer room for expansion and
contraction.
INSTALLING CORNERS
STEP 1:
Install the cladding boards on the
other side. Make sure that the first
board on the other side is closely
connected to the last board, then
fix it to the joist with colored
screws(M4x35).
NOTE 3:
Joist
Proper corner finish is shown in
M4×35 M4×25 the picture
EXTERIOR WALL CLADDING
INSTALLATION
STEP 2:
Fix the other end of the cladding
board to the joist and continue
the installation of the cladding
boards on the other side.
Bamboohub PH
bamboohubph