Welding Procedure Specification Page | of 2
WELDING PROCEDURE SPECIFICATION(WPS)
ASME CODE : Section IX, 2019 edition
Company name: TRUONG THUAN SERVICE TRADING INVESTMENT COMPANY LIMITED
WPS No: ND-VD174-WPS-010 Date: 04-Nov-2022
Supporting PQR No.: ND-VD174-PQR-010 Revision No: 0
Welding Process: GTAW ‘Type (S): MANUAL.
JOINT(QW-402) Detail
Joint Design —_: Groove or/and fillet weld
Root spacing :2+4mm
Backing Material (Type): No
2eammet
BASE METAL(QW-403)
P-No. 1 Group No. 1 to P-No.1 Group No.1
OR
Specification and type, grade, or UNS Number None
To Specification and type, grade, or UNS Number : None
OR
Chem. Analysis and Mech. Prop None
to Chem. Analysis and Mech. Prop ; None
Thickness Range:
Base Metal: Groove 15 +11.08mm Fillet: All
Maximum Pass Thickness : 1/2 in. (13 mm)
Other: N/A
FILLER METAL (QW 404)
_Spec. No. (SFA) 5.18
AWS No. (Class) ER70S-G
F-No 6
A-No 1
Size of Filler Metals 024mm
Filler Metal Product Form Solid
Supplemental Filler Metal None
Weld Metal
Deposited Thickness:
Stove Max 11.08 mm
Fillet ‘All
Electrode-Flux (Class) None
Flux Type ‘None
Flux Trade Name None
Consumable Insert None
Other NA
@ 2Welding Procedure Specification
Page 2 of 2
POSITION (QW405) POSTWELD HEATREATMENT (QW407)
Position (S) of Groove: All Temperature Range ; None
Welding Progression : Uphill for vertical Time Range None
Position of fillet : All Other : None
PREHEAT (QW406) GAS (OW408)
Preheat temperature |: N/A Percent composition
Inter-pass Temperature: Max. 230°C Gases % Mixture Flow Rate
Pre-heart Maintenance : None Argon 99,99 10-16 min
Other [None Shielding: Argon
Trailing: = N/A
Backing: N/A
Other N/A
ELECTRICAL CHARACTERISTICS (QW409)
Filler Mtl Wie] Faeyr [vali] Tet
wai Curent | Anos | peed | Power | (Rang) | Spend | He
Process [Chait | Diamar | Typeant | cRanzey |e : int
be “ion | "my" | Pony | “aye | See | ame | co | change, | am
foot | GTaw [eROsG [a4 [DON paaena?| Na [NA —[oaa7 posstas [ose
Fale [ raw fens. [24 | ocen posts| na | na | asi fa2u0s loan
Amps and volts, or power or energy range, should be specified for each electrode size, position, and
thickness, etc.
Pulsing Current : DC
Tungsten Electrode Size and Type
Mode of Metal Transfer for GMAW (FCAW)
Other
TECHNIQUE (QW-410)
String or Weave Bead
Orifice, Nozzle, or Gas Cup Size
Initial and Interpass Cleaning (Brushing, Grinding, etc.)
Method of Back Gouging
Oscillation:
Contact Tube to Work Distance
Multiple or Single Pass (Per Side)
Multiple or Single Electrodes
Electrode Spacing
Peening
Other
‘TRUONG THUAN SERVICE TRADING I
VESTMENT COMPANY LIMITED
Heat Input max:
11KJ/mm
: 2.4mm Dia. 2% Thoriated
N/A
iN/A
String/weave
8mm
: Brushing, Grinding
: None
N/A
:NIA
: Single/Muhtipl=
: Single Cong ty
CERTIFIED ORGANIZATION
(SGS VIETNAM LTD.)L_
Company Nae
Procedure Qualification Record No.:
|supporting WPS No.
|Welding Process(es): GTAW
Types:
JOINTS (QW-402)
PROCEDURE QUALIFICATION RECORDS (PQR)
(According to: ASME Section IX: 2019 _ Boller and Pressure Vessel Code)
‘TRUONG THUAN SERVICE TRADING INVESTMENT COMPANY LIMITED
Np-vD174-enR.010 Revision: Date: 04/22/2022
ND-VD174-pwS.010 Revision: 0 Date: 27/10/2022
Manual [] Semi-Automatic L] Mechanized L] ‘Automatic C]
+
|wela Metal Analysis A-No,
554mm
F Sequence of weld beads
sme
‘BASE METALS (QW-403) POSTWELD HEAT TREATMENT (QW-407):
Material Spe. AST AS3 Gr Temperature: None
[Tvpe/Grade or UNS No. “6B Time: a None =
IP-No.1 Group No. 1 to Po. GroupNo.i Other: == None
pee of Test Coupon: 554mm -
Diameter of Test Coupon: (00 114mm GAS (QW-408)
Max. Pass Thickness 13mm Percent Composition
jot None 7 Gas(es) Mixture Flow Rate |
Shielding 99.99% 30-15 L/min
FILLER METAL (QW-404) 1 Trailing: None We
Process: -
SFA Specification: 5
laws ciassification -
Filler Metal F-N See below Table
See below Table
{size of Filler Metal: 24 Amps. See below Table Volts: See below Table
Fiter Trade name: oRECO | Weld bead length
rit Mota Product Form: Seid | Tungsten Clectrode Size/Type: 2.4 / 2% Thoriated (WT20)
[Electrode Flux Class.: None : | Mode of Metal Transfer for GMAW (FCAW): N/A
[riux Type: None Heat Input: See below Table
[Flux Trade name: None : Other: None
[Weld Metal Thickness 554mm = =
'POSmION (@w-405) TECHNIQUE (QW-#30)
Position of Groove: 66 Travel Speed: See below Table
|Weld Progression (Up/Downhill) “Uphill String or Weave Bead: Both
ther: None Oscillation: —10-14mm
[PREHEAT (QW-406) E Multipass or Single Pass (per side}: Multipass
[Preheat Temperature ‘Ambient (29°C) Single or Multiple Electrodes: single
Interpass Temperature See below Table Other: None
[Method of Checkin Infrared Thermometer
ee
Page Lof2WELDING PARAMETERS.
Filer Metal Current gy TrAVE! eat input interpass
Pass No. Process Dia. | Type yy) Speed Other
[' | [caeton mm) potarty (8) | aamiminy, /mm) |)
| Specimen #2
raw | envosc [2a [cen | onan [sax [aoa [ona [anion
Taw | R708-6 [24 | ocen | 134-137 | 1013 | 90 0.89-1.19 | 135.7
[eraw | ~ramsc [2a |peen | ~tos-tso fan z43a{ asa oeso7e | ant |
“GTAW | ER70S-G | 24 | DCEN | 98-115 (10.4135) 20 0510.78 | 1845 |
[— Specimen #2 :
GTAW | ER70SG | 24 86-95 [9403 | 90 | 052-065 [ambient
2 | GTaw 8s 088-107 | 145.7
“3 | Gtaw 0.75-0.83 | 167.6
4] Taw t.5-0.75 | 1a
TENSILE TEST (QW-150)
Uitimate Tensile | Ultimate Unit] Type of Fallre and
i Load (kN) Stress (MPa) Location
#1 190 556 105.6 515 488 Break @ Base Metal
#2 190 557 105.8 523 495 Break @ Base Metal
Specimen No. | Width (mm) | Thickness (mm) | Area (mm2)
GUIDED BEND TEST (QW-160)
‘Specimen No. ‘Type of bend Result Remarks
“| Facesend = Test Reqet CNDOIART
#2 Face Bend Pass: Test Report CNI22/0288-1
5 Roo Bend rs TestRepat crizonzee1 |
He Root Bend Pass Test Report CNI22/0288-1
coma!
Type of Test.
Welder’s name: Le VIET TUAN stamp:
Test conducted by: Laboratory of SGS Viet Nam Ltd, Laboratory test No.: COMLAS 237 7
Vi
We, the undersigned, certify thatthe statements in this record are correct and that the test welds 4S /@GR@xdred, welded,
and tested in accordance with the requirements of Section IX of the ASME Boiler and Pressure Vessel
Page 20f2