Professional Documents
Culture Documents
Din 14 2
Din 14 2
Description
Material:
C45 steel or 1.4301 stainless steel.
Version:
Cold-drawn, bright.
Note:
Spline shafts based on DIN ISO 14 with straight parallel flanks. A spline shaft with
spline hub is used to transmit high torques while enabling simultaneous axial
movement. The spline shafts are cold-drawn. Cold drawing does not interrupt the
grain flow of the base material, ensuring spline shafts of very high strength.
Tolerances:
Straightness 0.8 mm/m.
Torsion max. 0.5 mm/m.
On request:
Other lengths.
Drawings
Overview of items
Overview of items
Description
Material:
Steel C45.
Stainless steel 1.4305.
Gunmetal Rg 7.
Version:
Bright.
Note:
Spline hubs based on DIN ISO 14 with straight parallel flanks. A spline shaft with
spline hub is used to transmit high torques while enabling simultaneous axial
movement.
Drawings
Overview of items
Overview of items
Description
Material:
Steel C45.
Stainless steel 1.4305.
Gunmetal Rg 7.
Version:
Bright.
Note:
Spline hubs based on DIN ISO 14 with straight parallel flanks. A spline shaft with
spline hub is used to transmit high torques while enabling simultaneous axial
movement.
Drawings
Overview of items
Overview of items