Professional Documents
Culture Documents
Sullair Stationary Pocket Guide
Sullair Stationary Pocket Guide
Sullair Stationary Pocket Guide
Air Power
FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS
in it for the long haul, driven by the design of the legendary air end. In and other complementary products.
factories and shops all over the world, you’ll find Sullair compressors
that have stood the test of time, running consistently today like they
did on day one. Sullair is A Hitachi Group Company.
Performance
The Sullair vision for success is two-fold: produce clean, quality air
for the job at hand, and provide cost-saving solutions for now and
the long term. With high standards of efficiency for our compressors,
Sullair is committed to customer performance — whether it’s a
mechanic completing body work, or a major manufacturing plant
operating around the clock.
These are the pillars that drive the Sullair brand promise —
a promise of quality with every machine we make.
2 Models vary by region. Contact your Sullair sales representative for more details. 3
Wet Storage Desiccant Dry Storage
Dryer
Rotary Screw Compressor Refrigerated
Dryer Flow
Controller
Filter Filter
Air
OR Out
Oil/Water Separator
Sullair Capabilities
Sullair Stationary Air Power Systems
50 Hz & CE
Delivery: 4.7 to 22.3 m³/min (166 to 787.5 cfm)
Pressure: 7,8, 10 bar (100, 115, 145 psi)
n Separator with no tubing and “O” ring seal to help prevent leaking
n Thermostatically controlled oil cooler
n Convenient oil sampling valve
n Efficiency combo cooler design
n Optimally located fluid and air cooler(s) Aftercooler on 15 & 20 hp models only
n Single-pass aftercooler
n Environmental protection pan fully-seals to help capture spills
n Easy-to-use control panel with modulation control and Wye-Delta starter
n IEC motor Select models available in single-phase
n Heavy-duty inlet filter for maximum efficiency, component
n TEFC (IP-54)
protection and easy maintenance
n Easy-to-use control panel with integrated full-voltage starter
n Direct-coupled gear drive
n Acoustic enclosure provides additional noise attenuation to levels n Easy access oil sampling valve
as low as 66 dBA n Factory filled with 10,000-hour Genuine Sullube
n 5-Year Emerald Warranty n Acoustic enclosure provides additional noise attenuation
to levels as low as 68 dBA
n 5-Year Emerald Warranty
8 Note: Shown with optional tank mount and dryer Models vary by region. Contact your Sullair sales representative for more details. 9
ES-6
Encapsulated Rotary Screw Air Compressors Encapsulated Rotary Screw Compressors
5 to 10 hp (4 to 7 kW) 15 to 25 hp (11 to 18 kW)
60 Hz 60 Hz
Delivery: 13 to 36 cfm (.36 to 1.01 m³/min) Delivery: 43.7 to 107.8 cfm (1.23 to 3.05 m³/min)
Pressure: 125 & 175 psi (8.6 & 12 bar) Pressure: 100, 125, 150, 175 psi (7, 8.6, 10.3, 12 bar)
Note: Diamond Warranty applies to models up to 150 psi/10 bar. Maintaining the Sullair
10-Year Diamond Warranty requires using Genuine Sullair parts and Sullube, as well as the
oil sampling program.
10 Models vary by region. Contact your Sullair sales representative for more details. 11
Lubricated Rotary Screw Air Compressors SN SERIES
60 Hz — 25 to 60 hp (18 to 45 kW) Lubricated Rotary Screw Air Compressors
50 Hz — 18 to 30 kW 60 Hz — 75 to 100 hp (55 to 75 kW)
60 Hz 60 Hz
Delivery: 85 to 269 cfm (2.4 to 7.62 m³/min) Delivery: 277 to 500 cfm (7.84 to 14.16 m³/min)
Pressure: 100, 125, 150, 175 psi (7, 8.6, 10.3, 12 bar) Pressure: 100, 125, 150, 175 psi (7, 8.6, 10.3, 12 bar)
Note: Diamond Warranty applies to models up to 150 psi/10 bar. Maintaining the Sullair
10-Year Diamond Warranty requires using Genuine Sullair parts and Sullube, as well as the
oil sampling program.
12 Models vary by region. Contact your Sullair sales representative for more details. 13
Single-Stage
Lubricated Rotary Screw Air Compressors Two-Stage
60 Hz — 250 to 350 hp (186 to 261 kW) Lubricated Rotary Screw Air Compressors
50 Hz — 160 to 261 kW 150 to 600 hp (112 to 450 kW)
60 Hz 60 Hz
Delivery: 1075 to 1615 cfm (30.4 to 45.7 m³/min) Delivery: 616 to 3000 cfm (17.4 to 84.9 m³/min)
Pressure: 100 & 125 psi (7 & 8.6 bar) Pressure: 100, 125, 150, 175 psi (7, 8.6, 10.3, 12 bar)
50 Hz 50 Hz
Delivery: 22.5 to 44.2 m³/min (795 to 1563 cfm) Delivery: 16.7 to 82.1 m³/min (590 to 2900 cfm)
Pressure: 7, 8.6, 10.3 bar (100, 125, 150 psi) Pressure: 7, 8.6, 10.3, 12 bar (100, 125, 150, 175 psi)
n Supervisor™ Microprocessor Controller monitors essential functions n Factory filled with 10,000-hour Genuine Sullube
n Constant Speed Drive models n Energy savings payback is often realized within the first two years
n
NEMA 4 starter n Proven two-stage technology since 1984
n Legendary Sullair air end with superior bearing design for long life n Tapered roller bearings for high-load carrying capacity — because
n Choice of air-cooled or water-cooled models compression is shared between two stages, bearing loads are
n Factory filled with 10,000-hour Genuine Sullube reduced, extending air end life
n Options n TS-32 models
n
Spiral Valve n NEMA 4 starter enclosure and controls
n
Variable Speed Drive (VSD) n TS-20 models
n
Acoustic Enclosure n NEMA 12 starter enclosure and controls
n Additional noise attenuation n Spiral Valve standard
n
Cold Weather Package n TS-20, TS-32, TS-32S models
n
High Static Fan n Premium efficient motors standard on 150 to 450 hp (110 to 336 kW)
n
Heat Recovery n Supervisor Microprocessor Controller
n
PristineFG Food Grade Lubricant (5-year warranty) n Acoustic enclosure provides additional noise attenuation
n Choice of air- or water-cooled models
Note: Maintaining the Sullair 10-Year Diamond Warranty requires using Genuine Sullair parts n Options
and Sullube, as well as the oil sampling program.
n Variable Speed Drive (VSD) n
High Static Fan
n PristineFG Food Grade n
EES Heat Recovery
Lubricant (5-year warranty) models up to 400 hp
n Cold Weather Package
Note: Diamond Warranty applies to models up to 150 psi/10 bar. Maintaining the Sullair
10-Year Diamond Warranty requires using Genuine Sullair parts and Sullube, as well as the oil
sampling program.
14 Models vary by region. Contact your Sullair sales representative for more details. 15
SULLAIR
OIL FREE
SOLUTIONS
Two-Stage Extreme Pressure
Lubricated Rotary Screw Air Compressors
60 Hz — 200 to 500 hp (149 to 373 kW)
60 Hz
Delivery: 500 to 1350 cfm (14.2 to 38.2 m³/min)
Pressure: 225, 250, 300, 350 psi (15.5, 17.2, 20.7, 38.2 bar)
16 Models vary by region. Contact your Sullair sales representative for more details. 17
WHEN OIL
FREE AIR IS
ESSENTIAL
DS-13 SERIES
Oil Free Rotary Screw Air Compressors
100 to 200 hp (75 to 149 kW)
60 Hz
Delivery: 427 to 801 cfm (12.1 to 22.7 m³/min)
Pressure: 100, 125, 150 psi (7, 8.6, 10.3 bar)
AND CENTRIFUGAL OFFERINGS n Superior design arrangement increases bearing life — L10 life
When Sullair became A Hitachi Group Company, of 100,000 hours — and lowers maintenance costs
n Supervisor Microprocessor Controller
we combined more than 100 years of Hitachi n Available in standard, air-cooled and water-cooled configurations
n
Normal maintenance can be completed without n Motorized isolation valve — automatically closes compressed
disassembling pump air discharge to prevent condensate backflow
n Highly efficient cooling n Phase monitor
n
Multi-stage cooling reduces ambient temperature out n Hitachi TEFC motor (models above 100 hp)
n
Receiver tank helps dissipate heat while reducing n Multi-stage cooling including patented high pre-cooler
n Options
n Variable Speed Drive (VSD)
n Air-Cooled
n Water-Cooled
20 Original SRL Series products designed by Hitachi Industrial Equipment Systems Co. Ltd. Original DSP Series products designed by Hitachi Industrial Equipment Systems Co. Ltd. 21
Sullair Centrifugal
Compressors
Oil Free Centrifugal Air Compressors
T-Series f-Series
Oil Free Centrifugal Air Compressors Oil Free Centrifugal Air Compressors
175 to 2300 hp (130 to 1715 kW) 1340 to 30,000 hp (999 to 22,371 kW)
T2, TX, TRA, TRE, TRX and T3 60 Hz
Delivery: 1200 to 118,000 cfm (34 to 3341.5 m³/min)
60 Hz Pressure: 15 to 725 psi (1 to 50 bar)
Delivery: 550 to 11,750 cfm (15.6 to 332.7 m³/min)
Pressure: 20 to 230 psi (1.4 to 15.9 bar) n Certified Class 0 Oil Free Air
n High-performance, custom designed compressors
n Certified Class 0 Oil Free Air to meet specific needs
n High-powered titanium impellers to provide additional strength n Available in packaged or non-packaged options
n Standard Inlet Guide Vane (IGV) guides gas flow direction, saving up n Highly efficient design to reduce energy usage
to 9% power consumption when not in full load operation n Horizontal split design gearbox allowing easy access to all moving
n Robust gear box with integrated coolers parts and simplifying maintenance
n Advanced PLC control system
22 * TRX models use stainless steel impellers Models vary by region. Contact your Sullair sales representative for more details. 23
SULLAIR Complete
Compressed
Air Solutions
Compressor
Capacity Controls
Air Compressors with Spiral Valve
n
Variable displacement air end allows compression volume to
change based on spiral valve location
n
Provides energy efficient turn down up to 50%, at a fraction of
the VSD price
n
Sullair capacity control systems are simple, reliable and consist
of a proven spiral valve and inlet butterfly valve
n
LS Series features Sullair Electronic Spiral Valve — provides up
to 55% turn down
n
Provides energy savings up to 30% compared to standard
control systems
n
Matches compressor displacement with output need
n
Outstanding energy efficiency in all operating conditions including
high elevation and dirty environments
50 Hz
Capacity: 2.26 to 29.28 m³/min (80 to 1034 cfm)
60 Hz 60 Hz
Capacity: 20 to 350 cfm (.57 to 10.7 m³/min) Capacity: 10 to 480 (.28 to 13.6 m³/min)
Max operating temperature: up to 210˚ F (98.9°C) § Vertical profile aluminum heat exchanger
§ Vertical profile aluminum heat exchanger § Minimum pressure drop
§ Minimum pressure drop § Gravitational self-cleaning
§ Gravitational self-cleaning § Hot gas bypass designed for stable dew point in all operating conditions
§ Hot gas bypass designed for stable dew point in all operating conditions § Compact design
§ Integrated SULLIMAX™ Drain § Timer solenoid drain
§ Integrated pre-filter § Easy-open panels for simplified service
§ Integrated pre-cooler
§ Large cross section of flow channels for low velocities and
reduced power input SR+ Series — Premium Non-Cycling Refrigerated Dryers
§ Easy-open panels for simplified service
60 Hz
Capacity: 20 to 10,000 cfm (.57 to 283.1 m³/min)
§ Vertical profile aluminum heat exchanger
§ Minimum pressure drop
§ Gravitational self-cleaning
§ Hot gas bypass designed for stable dew point in all operating conditions
§ High-efficiency performance
§ Oversized condensers
§ Integrated SULLIMAX Drain
§ Easy-open panels for simplified service
28 Models vary by region. Contact your Sullair sales representative for more details. 29
Refrigerated Dryers (Continued)
10 to 10,000 cfm (.28 to 283.1 m³/min)
50 Hz & 60 Hz
Capacity: 13 to 7353 cfm (.37 to 208.2 m³/min)
Maximum operating pressure: 230 psi (16 bar)
Pressure drop: Less than 3 psi (.2 bar)
§ RFA — 10 – 2300 models
§ Digi-pro controller for one-touch adjustment with digital dew
point monitoring, energy-saving mode, maintenance intervals,
hour meter and status report
SRC Series — Cycling Refrigerated Dryers § RFA — 3000 – 7300 models
§ ESD3 controller for economy features and alarm capabilities
60 Hz § Aluminum plate heat exchanger
Capacity: 30 to 500 cfm (.85 to 14.2 m³/min) § Energy efficient R134a refrigerant
§ Vertical profile aluminum heat exchanger § Pressure switches control condenser fan motor
§ Minimum pressure drop § Electrical Conformance Standards: UL-508A
§ Gravitational self-cleaning § Compact design
§ Independent operation controller and valve § Easy access to cooling components
for maximum dew point stability
§ Cold trap design
§ High-efficiency performance RFE Series — Europe
§ Integrated SULLIMAX Drain
§ Easy-open panels for simplified service 50 Hz
Capacity: 13 to 7373.7 cfm (.37 to 208.8 m³/min)
Maximum operating pressure: 230 psi (16 bar)
SRV Series — Cycling Variable Speed Refrigerated Dryers Pressure drop: Less than .2 bar (3 psi)
§ RFE-03 - 652 models
60 Hz § Digi-pro controller for one-touch adjustment with digital dew
Capacity: 800 to 6000 cfm (22.7 to 169.9 m³/min) point monitoring, energy-saving mode, maintenance intervals,
§ Vertical profile aluminum heat exchanger hour meter and status report
§ Minimum pressure drop § RFE-847 - 2083 models
§ Gravitational self-cleaning § ESD3 controller for economy features and alarm capabilities
§ Variable Speed Technology for maximum energy savings § Aluminum plate heat exchanger
§ Independent operation controller and valve for maximum § Energy efficient R134a refrigerant
dew point stability § Pressure switches control condenser fan motor
§ High-efficiency performance § Electrical Conformance Standards: UL-508A
§ Integrated SULLIMAX Drain § Compact design
§ Easy-open panels for simplified service § Easy access to cooling components
30 Models vary by region. Contact your Sullair sales representative for more details. 31
Desiccant Dryers
3 to 10,000+ cfm (.08 to 283.1+ m³/min)
DP Series — Premium Desiccant Heatless Regenerative Dryers D Series — Desiccant Heatless Regenerative Dryers
50 & 60 Hz 50 & 60 Hz
Delivery: 80 to 2800 cfm (2.3 to 79.3 m³/min) Capacity: 80 to 800 cfm (2.3 to 22.7 m³/min)
Max operating pressure: 150 psi (10.3 bar) Max operating pressure: 150 psi (10.3 bar)
§ 3.8˝ Desiccant Touch Screen (DTS) Controller § LED Desiccant Controller (DC) with dryer schematic
§ Condition monitoring for ease of operation § Dew point: - 40°F (-40°C)
§ Energy Management System § Average purge air: 15%
§ Humidity sensor helps reduce purge air and energy consumption § High performance angle body valves with PTFE seals
§ Dew point: - 40°F (-40°C) help reduce air leakage
§ Average purge air: 15% § Reduced maintenance costs with service kits
§ High performance angle body valves with PTFE seals § IP-55
help reduce air leakage § ASME approved vessels
§ Reduced maintenance costs with service kits § Minimized noise via exhaust valve speed control
§ NEMA 4 § Options
§ ASME approved vessels § Pre-piped filter with 3-valve bypass
§ Minimized noise via exhaust valve speed control § CRN approved vessels available
§ Options
§ Dew point: -100°F (-73°C)
§ Dew point sensor
§ Pre-piped filter with 3-valve bypass
§ CRN approved vessels available
32 Models vary by region. Contact your Sullair sales representative for more details. 33
Desiccant Dryers (Continued)
3 to 10,000+ cfm (.08 to 283.1 m³/min)
50 & 60 Hz
Capacity: 80 to 5000 cfm (2.3 to 141.6 m³/min)
Max operating pressure: 150 psi (10.3 bar)
§ Standard 4.3 operating interface for optimum communication and
plant system integration
§ iOS and Android WindEDIT APP
§ Embedded Ethernet port
§ Embedded SD memory port
§ Modbus TCP and RTU
§ Embedded RS232C/RS485 user selectable
§ Data logging
DMD — Desiccant Modular Regenerative Dryers § Web server functions
§ Easy-access PLC color touch screen controller
50 & 60 Hz § Dew point: - 40°F (-40°C)
Delivery: 3 – 240 cfm (.08 – 6.8 m³/min) § 4°F/-20°C can be user selected from controller
Max operating pressure: 232 psi (16 bar) § Average purge air: 15%
§ Dew point: - 40°F (-40°C) § Pre- and after-filter pre-piped and mounted
§ Average purge air: 15% § Field adjustable drying cycle time (6,10 or 15 minutes)
§ Completely automatic § Robust steel frame with floor stand
§ Mini PLC Monitor § NEMA 4
§ Compact design with high quality components § Options
§ Adjustable wall mounted § Dew point: -100°F (-73°C)
§ Quick and easy connection § Demand cycle control for energy savings
§ Point of use placement § NEMA 4x and NEMA 7
§ Inlet and purge manifold design for low pressure drop § High pressure up to 10,000 psi (689.5 bar)
§ Options § Failure to switch pressure alarm
§ Pre- and after-filter (shipped loose) § Pneumatic control timer
§ Mounted filters with 3-valve bypass § Optional voltage
§ Visual moisture indicator § 208, 220, 230/1/60
§ Energy efficient demand cycle control with dew point monitor § 208, 220, 230/1/50
§ Dew point monitor § High dew point alarm
§ -4°F (-20°C) or -100°F (-73°C) pressure dew point § Special finishes for harsh environments
34 Models vary by region. Contact your Sullair sales representative for more details. 35
Desiccant Dryers (Continued)
3 to 10,000+ cfm (.08 to 283.1 m³/min)
DEX Series — Desiccant Externally Heated Regenerative Dryers DBP Series — Desiccant Heated Blower Purge Regenerative Dryers
60 Hz 60 Hz
Capacity: 200 to 3500 cfm (5.7 to 99.1 m³/min) Capacity: 500 to 10,000 cfm (14.2 to 283.2 m³/min)
Max operating pressure: 125 psi (8.6 bar) Max operating pressure: 125 psi (8.6 bar)
§ 7" Desiccant Touch Screen (DTS) Controller § 7" Desiccant Touch Screen (DTS) Controller
§ Dew point: - 40°F (-40°C) § Dew point: - 40°F (-40°C)
§ 4°F/-20°C can be user selected from controller § 4°F/-20°C can be user selected from controller
§ Average purge air: 7% § Average purge air: 3%
§ 7" Color DTS Controller § 7" Color DTS Controller
§ NEMA 12 § NEMA 12
§ High-quality valves, actuators and air distribution schemes § High-quality valves, actuators and air distribution schemes
§ Rugged frame with forklift pockets § Rugged frame with forklift pockets
§ Easy detection and diagnostic alarm system § Easy detection and diagnostic alarm system
§ Options § Options
§ Demand cycle control with digital dew point monitor § Demand cycle control with digital dew point monitor
§ PROFIBUS § PROFIBUS
§ Tank-mounted temperature gauge § Tank-mounted temperature gauge
§ Inlet/outlet pressure gauge § Inlet/outlet pressure gauge
§ Failure to switch pressure alarm § Failure to switch pressure alarm
§ Pre-mounted filters § Pre-mounted filters
§ 3-valve and 9-valve duplex filter bypass options § 3-valve and 9-valve duplex filter bypass options
§ NEMA 4 § NEMA 4
§ NEMA 4 stainless steel § NEMA 4 stainless steel
§ NEMA 7 Class1, Div II Group C & D electrical enclosure § NEMA 7 Class1, Div II Group C & D electrical enclosure
§ Subzero & low ambient package options § Subzero & low ambient package options
§ Tank insulation with safety jacket § Tank insulation with safety jacket
§ Optional voltage § Optional voltage
§ 575/3/60 § 575/3/60
§ 380–400/3/50 § 380–400/3/50
§ Stainless steel control air tubing § Stainless steel control air tubing
§ High-pressure design 200, 250 and 300 psi § High-pressure design 200, 250 and 300 psi
§ Fusible disconnect for NEMA 1 (indoor) and NEMA 4X (outdoor) § Fusible disconnect for NEMA 1 (indoor) and NEMA 4X (outdoor)
§ Visual moisture indicator § Visual moisture indicator
36 Models vary by region. Contact your Sullair sales representative for more details. 37
SX Flange Filters — Coalescing
Flow rates: 1900 to 21,000 cfm (53.8 to 594.7 m³/min)
Maximum operating pressure: 232 psi (16 bar)
§ Powder-coated carbon steel
§ SULLIMAX Zero Loss Drain
38 Models vary by region. Contact your Sullair sales representative for more details. 39
Oil/Water Separators SULLIMAX ™
40 Models vary by region. Contact your Sullair sales representative for more details. 41
AFTERMARKET
FlowLogic ™
42 Models vary by region. Contact your Sullair sales representative for more details. 43
Aftermarket Lubricants
Sullair Genuine Parts Sullair takes pride in providing the best compressor lubricants in the
Sullair design and engineering teams ensure that the parts used industry. Designed specifically for the rigorous requirements of today’s
in our compressors are of the highest quality, providing years of compressors in a multitude of environments, Sullair lubricants include:
trouble-free performance.
Genuine Sullube®
When it comes to replacement parts, it is essential to only use A 10,000-hour, extended-life synthetic lubricant powered by
Sullair Genuine Parts, including: Dow technology, Sullube has been used in more than 50,000
n
Fluid filters compressors worldwide.
n
Air filters
n
Downstream filters 24KT®
n
Separators Sullair 24KT has a silicone-based structure that does not break down at
normal operating temperatures and is ideal for compressors running 24/7.
SRF II/8000®
SRF II/8000 lasts up to 8000 hours and has a high resistance
to breakdown.
SRF 1/4000®
SRF 1/4000 lasts up to 4000 hours and is ideal for machines that do
not run continuously but still require a high viscosity index.
Centrifugal Lubricants
CCL is a highly refined mineral oil designed specifically for fast
n
speed machinery
CCL PLUS is a synthetic lubricant for fast speed machinery
n
44 45
Sullair Parts, Service Air Quality Standards
and Warranties ISO 8573.1 Classes
Air Quality Classes in Accordance with ISO 8573-1:2010
Solid Particles, Maximum Pressure Oil Content
A Complete Parts, Service and Training Solution Number of Particles Per m3
ISO Dew (liquid, aerosol,
Sullair offers the complete solution for compressed air system needs 0.1 µm < 0.5 µm < 1.0 µm < Point oil vapor)
Class
ranging from replacement parts and fluids — engineered and d ≤ 0.5 µm d ≤ 1.0 µm d ≤ 5.0 µm ˚F mg/m3
manufactured to Sullair standards — to service and training designed
In accordance with the unit operator's or supplier's
to keep compressed air systems running at optimal performance. 0
specifications, stricter requirements than Class 1
1 ≤ 20,000 ≤ 400 ≤ 10 ≤ -100 ≤ 0.01
10-Year Diamond Warranty 2 ≤ 400,000 ≤ 6000 ≤ 100 ≤ -40 ≤ 0.10
Confirming rugged design and a commitment to customer satisfaction, 3 — ≤ 90,000 ≤ 1000 ≤ -4 ≤ 1.00
all new Sullair lubricated stationary air compressors (with discharge 4 — — ≤ 10,000 ≤ 37 ≤ 5.00
pressures up to 150 psi/10 bar) include the exclusive 10-Year Diamond 5 — — ≤ 100,000 ≤ 45 >5
Warranty. The comprehensive warranty covers: 6 — — — ≤ 50 —
n 10 years on the air end Measured in accordance with ISO 8573-4,
ref. conditions 14.5 psi [a] absolute, 68°F, 0% RH
n 5 years on the motor, VSD (if equipped),
air/fluid receiver, oil cooler and aftercooler Measured in accordance with ISO 8573-3
Service Training Courses are presented by factory-certified instructors 0.0 0.1 1 10 100
at the Sullair Service Training Center in Michigan City, Indiana. Seminars Particle/micron size
46 47
AirSuite Demo Compressed Air Audit — 6/13/2018 to 6/19/2018
PRODUCTION
FLOW (cfm) PRESSURE (psig) POWER (kW(hp))
Abs. Minimum 0.0 102.3 128.4 (172.2) SHIFT 2 601.7
Minimum* 0.0 102.3 128.4 (172.2)
SHIFT 3 716.6
Average* 788.1 113.7 342.0 (458.5)
Maximum 2,836.9 122.1 579.4 (776.6) SAT 691.7
WEEKEND
Total Annual kWh 2,988,010 kWh Energy Cost @ $0.06/kWh $179,281 SUN 688.7
Peak kW 495.3 @ 6/13/18 1:10:45 PM No added demand costs
Total Annual Cost = $179,281
*Includes measurements and data only when the system was pressurized and compressor running
SHIFT 1 420.7
n System reliability
Common areas identified for efficiency improvements include: EFFICIENCY (kW/100 cfm)
n Misuses of air 0 10 20 30 40 50
n Inefficient system setups
SHIFT 1 36.2
PRODUCTION
SHIFT 2 47.7
AirSuite SHIFT 3 44.6
Included with a full system air audit, AirSuite provides options and
SAT 49.0
WEEKEND
n
Maintenance costs up to 60%*
n
Electrical costs by up to 50%*
n Simulations showing the impact of changing compressors — helping
you decide if a different compressor setup is the right option OVERALL SYSTEM EFFICIENCY (kW/100 cfm)
n Real-time running samples
96 48 24 12
n Detailed reports including system efficiency, cfm usage and power
consumption data MEASURED
n
Reports may help as documentation for energy provider rebates EFFICIENCY
43.40
Plus, AirSuite provides innovative system modeling for new POOR BEST
compressor setups RATED
EFFICIENCY
20.82
* Based on average data of implemented plans. Results may vary.
48 49
THE COMPLETE Sullair STATIONARY LINEUP
PRODUCT LINE Power Range (kW) North America Latin America 60Hz 50Hz CE
LS Series 90 –110
LS Series 110–160
ShopTek® 4–15
ShopTek 18–75
ShopTek 75 –110
ES-6 S-energy® 4–7
S-energy Encapsulated 11–18
S-energy 18–30
S-energy 30–45
SN Series 55–75
Single-Stage 160–186
Single-Stage 186–260
Two-Stage 112–450
SRL Series 1.5–33
DSP Series 22–240
DS-13 Series 75–149
Sullair Centrifugal 130–22,371
Two-Stage Extreme Pressure 149–373
Vacuum Systems 4–145
50 51
© 2021 Sullair, LLC. All rights reserved. Specifications subject to change without notice.
Products and services noted are trademarks and registered trademarks of Sullair, LLC.
SAPPG202103-7