Professional Documents
Culture Documents
Da Toilet
Da Toilet
Millimetres
10
Y 2260
0
230 230
830 600 600
R
230
230
2480
2710
2710
2710
D.A.TOILET
1800X2250 TERRACE
X X
230
UP TERRACE
RAMP
900 Y 900
230 230
2260
PLAN
5D
architecture
· All dimensions to be read not to be scaled. UTTAR PRADESH interior
planning
PROPOSED CONSTRUCTION OF DIFFERENTLY ABLED
PROJECTS
· This drawing supercedes all other previous drawings. CORPORATION TOILET BLOCK AT VARIOUS GOVT. COLLEGE,
· Dimensions are in inches except otherwise. LIMITED MEERUT, U.P.
· This drawing should be read in conjunction with relevant structural Client: Drawing Title: Project Stage:
drawing & any discrepancy noticed should be got clarified before DA TOILET
SRENGISE
execution. GROUND FLOOR WD
· The drawing is the property of the architects. 5D & Associates
ARCHITECTURE,INTERIOR & PLANNING Paper Size: Discipline: Date: Scale:
· Any copying or reproduction of this drawing should only be done after a External Consultant:
C-91, VIBHUTI KHAND, GOMTINAGER,, LUCKNOW.
A3 ARCHITECTURE 2023-04-04
written permission of the architects. R00 2023-02-22 First Issue Bhavna Vaibhav Shashank
Ph - 7903561304,9565077981
Revision:
Designed: Checked: Designed: Checked: Drawing:
· Any defaulter is liable to be sued for the violation of the copyright act. REV DATE DESCRIPTION Originator Checked Approved -- -- BHAVNA Vaibhav WD_R00_UPPCL_DA TOILET_UP15_AR_02061 R00
100
300
Millimetres
+ 3000
10
0
2550
3000
+ 450
± 0.00
450
ELEVATION
300
300
+ 3000 + 3000
2550
2550
3000
3000
+ 450 + 450
± 0.00 ± 0.00
450
450
SECTION-YY
SECTION-XX SECTION-YY
5D
architecture
· All dimensions to be read not to be scaled. UTTAR PRADESH interior
planning
PROPOSED CONSTRUCTION OF DIFFERENTLY ABLED
PROJECTS
· This drawing supercedes all other previous drawings. CORPORATION TOILET BLOCK AT VARIOUS GOVT. COLLEGE,
· Dimensions are in inches except otherwise. LIMITED MEERUT, U.P.
· This drawing should be read in conjunction with relevant structural Client: Drawing Title: Project Stage:
drawing & any discrepancy noticed should be got clarified before DA TOILET
SRENGISE
execution. ELEVATION & SECTION WD
· The drawing is the property of the architects. 5D & Associates
ARCHITECTURE,INTERIOR & PLANNING Paper Size: Discipline: Date: Scale:
· Any copying or reproduction of this drawing should only be done after a External Consultant:
C-91, VIBHUTI KHAND, GOMTINAGER,, LUCKNOW.
A3 ARCHITECTURE 2023-04-04
written permission of the architects. R00 2023-02-22 First Issue Bhavna Vaibhav Shashank
Ph - 7903561304,9565077981
Revision:
Designed: Checked: Designed: Checked: Drawing:
· Any defaulter is liable to be sued for the violation of the copyright act. REV DATE DESCRIPTION Originator Checked Approved -- -- BHAVNA Vaibhav WD_R00_UPPCL_DA TOILET_UP15_AR_03061 R00
PROJECT
1 PROPOSED STRUCTURE FOR DIFFERENTLY
ABLED TOILET BLOCK AT VARIOUS
COLLEGE, MEERUT, U.P.
Notes:-
[General]
[1] All dimensions are in m.m. unless otherwise mentioned.
[2] Only figured dimensions are to be followed neither the bars shall be counted nor the
dimensions scaled from the drg.
[3] Any discrepancy in the drgs. shall be brought to the notice of the architect / consultant and
1 1 1 1 [7] The cover block of cement mortar shall be used to ensure the reqd. cover of reinforcement
[8] Development length ( Ld ) for different dia meter of bars for conc. mix of grade M - 20 shall
be = 56 x dia of bar
[9] Conc. mix for r.c.c. work shall be of grade M - 25 conforming to I.S. 456 - 2000.
[10] Necessary fixture for electrical, plumbing, etc. shall be provided in slab, beams before
230 execution as per relevant drgs.
[11] The structure has been designed for G.F.+ 1 = 2 storey
2
[12] P.C.C.(1:4:8) shall be provided.
[13] All plain concrete & rcc shall be strictly in accordance with the provision of IS - 456:2000.
[14] Cutting,bending,fixing & placing of bars shall be in accordance with IS - 2502:1968,
2 725 [5] Ties in portion of col. below tie beam shall be same as end zone .
2 2 2 2 [6] Vertical bars of rcc column at top slab shall be extended upto top of beam & bent into beam
by development length.
150
below the main top steel as shown in typ. sec.of slab.
[Masonry work]
G.LVL. [1] 115 th.(1/2 brick) wall -1:4 cement: sand mortar shall be used & #8,1 nos. bars at every 4th course
shall be provided
230 REVISION
References : IS 456 - 2000, IS - 13920 - 2016, IS - 1893 part (1) : 2016, SP-16 , SP-34
arch. drg. no. - all arch. drgs
750
230
L.C.
600 ARCHITECT CONSULTANTS:
DETAIL OF RAMP
345
5D
architecture
interior
planning
5 Designers
ARCHITECTURE,INTERIOR & PLANNING
Table-2, Details of Slab Reinforcement Design Team Er. Vineet Kr. Singh
DRG. NO.
ST-02 (SIGNATURE & STAMP OF CONSULTANT)
Sr. No.
Parallel to Shorter Span (Main bars) Parallel to Longer Span (Cross bars) STRUCTURAL CONSULTANTS Er. Pragya Patel
B.Tech (Civil) M.Tech (Structures)
PB1
PROPOSED STRUCTURE FOR DIFFERENTLY
ABLED TOILET BLOCK AT VARIOUS
LB1 Notes:-
[General]
COLLEGE, MEERUT, U.P.
LB1= PLINTH BAND LB1= LINTEL BAND [7] The cover block of cement mortar shall be used to ensure the reqd. cover of reinforcement
LB1
[8] Development length ( Ld ) for different dia meter of bars for conc. mix of grade M - 20 shall
be = 56 x dia of bar
[9] Conc. mix for r.c.c. work shall be of grade M - 25 conforming to I.S. 456 - 2000.
AS 230X150 WITH AS 230X150 WITH [10] Necessary fixture for electrical, plumbing, etc. shall be provided in slab, beams before
LB1
execution as per relevant drgs.
S1
[11] The structure has been designed for G.F.+ 1 = 2 storey
[12] P.C.C.(1:4:8) shall be provided.
2-12Ø AT TOP AND 2-10Ø AT TOP AND [13] All plain concrete & rcc shall be strictly in accordance with the provision of IS - 456:2000.
[14] Cutting,bending,fixing & placing of bars shall be in accordance with IS - 2502:1968,
IS - 5525:1969 & IS - 456:2000
AS 8Ø@200MMC/C
[3] Earth below foundation shall be properly rammed & consolidated before laying lean concrete.
PB1
PB1
AS 8Ø@200MMC/C [Columns]
[1] Ties in portion of col. & beam junction shall be same as end zone.
[2] The spacing of ties at overlaps should not exceed 100 mm. c/c
[3] Over laps are allowed only at middle zone of the columns.
[4] Not more than 50 % of bars shall be lapped at a section and laps shall be staggered.
[5] Ties in portion of col. below tie beam shall be same as end zone .
[6] Vertical bars of rcc column at top slab shall be extended upto top of beam & bent into beam
by development length.
[Beams]
[1] For location of beams refer slab plan.
[2] The spacing of stirrups at overlaps should not exceed 100 mm. c/c
[3] Where two layers of reinf. bars are to be provided, spacer bar are to be provided at spacing of
LB1
1000 mm. max. and the dia of the spacer bar shall be higher of dia of longitudinal bars or 25 mm.
[4] Max. 3 nos. of bars shall be provided in a layer of 230 mm wide beam.
[5] At the junction of two diff. number of beams the higher reinf. at the support shall be adopted.
[6] Over lap in top bars shall be near mid span & in bottom bars shall be near support or at support.
PB1
[7] The depth of beam monolithic with slab as specified in schedule shall be inclusive of slab
thickness unless otherwise specified.
[8] Hooks in stirrups of beams shall be bent inside at 135° & length of hooks shall be
10 x dia of bar of stirrups
[Slabs]
[1] For slab reinforcement refer table-4 (detail of slab reinforcement).
[Masonry work]
75 [1] 115 th.(1/2 brick) wall -1:4 cement: sand mortar shall be used & #8,1 nos. bars at every 4th course
shall be provided
[2] 230 th.(1 brick) wall - 1:6 cement: sand mortar shall be used.
[3] The vertical face of concrete at junction of wall & rcc member shall be raked to give a rough surface
& 1:4 cement:sand mortar should be applied to developed bond between brick & rcc member.
G. LVL. REVISION
References : IS 456 - 2000, IS - 13920 - 2016, IS - 1893 part (1) : 2016, SP-16 , SP-34
arch. drg. no. - all arch. drgs
DRG. TITLE:
STRUCTURE OF DA TOILET
5D
architecture
DETAIL OF STEPS
interior
planning
5 Designers
DETAIL OF PLINTH BAND ARCHITECTURE,INTERIOR & PLANNING
C-91, VIBHUTI KHAND, GOMTINAGER,, LUCKNOW.
Ph - 9565.77981, 7903561304
SRENGISE
Drawn By
Table-2, Details of Slab Reinforcement Design Team Er. Vineet Kr. Singh
DRG. NO.
ST-02 (SIGNATURE & STAMP OF CONSULTANT)
Sr. No.
Parallel to Shorter Span (Main bars) Parallel to Longer Span (Cross bars) STRUCTURAL CONSULTANTS Er. Pragya Patel
B.Tech (Civil) M.Tech (Structures)