Professional Documents
Culture Documents
Test Report: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch
Test Report: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch
Test Report: SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch
Shenzhen Branch
TEST REPORT
Application No.: SZEM1911019937CR
Applicant: Guangdong Shiji Technology Co., Ltd
Address of Applicant: NO.8, Road 5, Dachewei Area, Yongxin Industrial Zone Lianshang Town,
Chenghai District, Shantou, China
Manufacturer: Guangdong Shiji Technology Co., Ltd
Address of Manufacturer: NO.8, Road 5, Dachewei Area, Yongxin Industrial Zone Lianshang Town,
Chenghai District, Shantou, China
Equipment Under Test (EUT):
EUT Name: RC Quadcopter
Model No.: Please refer to section 2
Please refer to section 2 of this report which indicates which model was
actually tested and which were electrically identical.
Trade mark: 2ALUJZ5GPS1080PA1
Standard(s) : 47 CFR Part 15, Subpart C 15.249
Date of Receipt: 2019-11-07
Date of Test: 2019-11-08 to 2019-11-11
Date of Issue: 2019-11-18
Test Result: Pass*
* In the configuration tested, the EUT complied with the standards specified above.
Keny Xu
EMC Laboratory Manager
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 2 of 44
Revision Record
Version Chapter Date Modifier Remark
01 2019-11-18 Original
Eric Fu /Reviewer
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 3 of 44
2 Test Summary
Radio Spectrum Technical Requirement
Item Standard Method Requirement Result
47 CFR Part 15, 47 CFR Part 15, Subpart
Antenna Requirement N/A Pass
Subpart C 15.249 C 15.203
Remark:
Model No.: S20W720P-D(GPS), S20W1080P(GPS), S20W1080P-5G(GPS), S30W720P-D(GPS),
S30W1080P(GPS), S30W1080P-5G(GPS), S70W720P-D(GPS), S70W1080P(GPS), S70W1080P-
5G(GPS), X300S1, X300S1W, X300S1W720P, X300S1W720P-D, X300S2, X300S2W, X300S2W720P,
X300S2W720P-D, Z5GPS720P, Z5GPS1080P, Z5GPS1080P-5G, Z7GPS720P, Z7GPS1080P,
Z7GPS1080P-5G, Z7 PRO, Z7 2.7K, Z7 2.7K PRO, F11GPS1080P-5G, F11 PRO, F11s PRO , F11
2.7K, F11s 2.7K, F11 2.7K PRO, F11s 2.7K PRO, F11 4K, F11s 4K, F11 4K PRO, F11s 4K PRO, SJ200,
SJ230, SJ250, SJ2001, SJ2012, SJ280, Z5-C01, Z5-C02, Z7-C01, Z7-C02, F11-C01, F11-C02, VR001,
C1001, S70-D01, S20-D01, S30-D01, Z5-D01, Z7-D01, F11-D01, Z5-CD01, Z5-CD02, F11-CD01, F11-
CD02, Z7-CD01, Z7-CD02, X300-2, X300VR, S20VR, S30VR, S70VR, X300-1, T20CW, T30CW,
T70CW, X200-1, X200-2, F22 1080P, F22 2.7K, F22 4K, F22 2.7K PRO, F22 4K PRO
Only the model Z5GPS1080P was tested, since the electrical circuit design, layout, components used,
internal wiring and functions were identical for all the above models, with only difference on product color,
external appearance and packaging.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 4 of 44
3 Contents
Page
1 COVER PAGE ............................................................................................................................................1
3 CONTENTS ................................................................................................................................................4
4 General Information
4.1 Details of E.U.T.
Power Supply: Remote control:DC 3.7V 300mAh(Charg by USB port)
Cable: USB cable:43cm unshielded
Operation Frequency: 2405MHz to 2478MHz
Modulation Type: GFSK
Number of Channels: 74
Antenna Type: Single line Antenna
Antenna Gain: 0dBi
Channel list:
Operation Frequency each of channel
Channel Frequency Channel Frequency Channel Frequency Channel Frequency
1 2405MHz 20 2424MHz 39 2443MHz 58 2462MHz
2 2406MHz 21 2425MHz 40 2444MHz 59 2463MHz
3 2407MHz 22 2426MHz 41 2445MHz 60 2464MHz
4 2408MHz 23 2427MHz 42 2446MHz 61 2465MHz
5 2409MHz 24 2428MHz 43 2447MHz 62 2466MHz
6 2410MHz 25 2429MHz 44 2448MHz 63 2467MHz
7 2411MHz 26 2430MHz 45 2449MHz 64 2468MHz
8 2412MHz 27 2431MHz 46 2450MHz 65 2469MHz
9 2413MHz 28 2432MHz 47 2451MHz 66 2470MHz
10 2414MHz 29 2433MHz 48 2452MHz 67 2471MHz
11 2415MHz 30 2434MHz 49 2453MHz 68 2472MHz
12 2416MHz 31 2435MHz 50 2454MHz 69 2473MHz
13 2417MHz 32 2436MHz 51 2455MHz 70 2474MHz
14 2418MHz 33 2437MHz 52 2456MHz 71 2475MHz
15 2419MHz 34 2438MHz 53 2457MHz 72 2476MHz
16 2420MHz 35 2439MHz 54 2458MHz 73 2477MHz
17 2421MHz 36 2440MHz 55 2459MHz 74 2478MHz
18 2422MHz 37 2441MHz 56 2460MHz
19 2423MHz 38 2442MHz 57 2461MHz
Note:
In section 15.31(m), regards to the operating frequency range over 10 MHz, the Lowest frequency, the
middle frequency, and the highest frequency of channel were selected to perform the test, and the
selected channel see below:
Channel Frequency
The Lowest channel(CH1) 2405MHz
The Middle channel(CH36) 2440MHz
The Highest channel(CH74) 2478MHz
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 6 of 44
5 Equipment List
20dB Bandwidth
Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date
Shielding Room SAEMC MSR733 SEM001-09 2019-06-13 2022-06-12
DC Power Supply Zhao Xin KXN-6020D SEM011-08 2019-09-24 2020-09-23
Spectrum Analyzer Rohde & Schwarz FSP SEM004-06 2019-09-24 2020-09-23
JS1120-2
Measurement Software JS Tonscend N/A N/A N/A
BT/WIFI V2.
Coaxial Cable SGS N/A SEM031-02 2019-07-11 2020-07-10
Attenuator Weinschel Associates WA41 SEM021-09 N/A N/A
Signal Generator KEYSIGHT N5173B SEM006-05 2019-09-24 2020-09-23
Power Meter Rohde & Schwarz NRVS SEM014-02 2019-09-24 2020-09-23
Electric and Magnetic NBM-
Narda EMC2143 2018-02-07 2020-02-06
Field Analyzer 550/EHP-50F
Electric Field Probe WANDEL &
EMR-20 EMC0907 2019-05-21 2020-05-20
(100KHz-3GHz) GOLTERMANN
EMF Tester Narda ELT-400 SZE039-4 2019-07-08 2020-07-07
Radiated Emissions
Equipment Manufacturer Model No Inventory No Cal Date Cal Due Date
3m Semi-Anechoic
AUDIX N/A SEM001-02 2018-03-13 2021-03-12
Chamber
e3 V8.2014-6-
Measurement Software AUDIX N/A N/A N/A
27
Coaxial Cable SGS N/A SEM026-01 2019-07-11 2020-07-10
AgilentTechnologies
EXA Spectrum Analyzer N9010A SEM004-12 2019-04-12 2020-04-11
Inc
Horn Antenna
Rohde & Schwarz HF907 SEM003-07 2018-04-13 2021-04-12
(1-18GHz)
Horn Antenna
Schwarzbeck BBHA 9170 SEM003-15 2017-10-17 2020-10-16
(15GHz-40GHz)
Pre-Amplifier Compliance
Directions Systems PAP-0126 SEM004-11 2019-09-24 2020-09-23
(0.1-26.5GHz) Inc.
Pre-amplifier(18-26GHz) Rohde & Schwarz CH14-H052 SEM005-17 2019-04-01 2020-03-31
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 10 of 44
Pre-amplifier Compliance
Directions Systems PAP-2640-50 SEM005-08 2019-04-01 2020-03-31
(26GHz-40GHz) Inc.
DC Power Supply Zhao Xin KXN-6020D SEM011-08 2019-09-24 2020-09-23
Active Loop Antenna ETS-Lindgren 6502 SEM003-08 2017-08-22 2020-08-21
RE in Chamber
Test Equipment Manufacturer Model No. Inventory No. Cal. Date Cal. Due date
3m Semi-Anechoic
ETS-LINDGREN N/A SEM001-01 2017-08-05 2020-08-04
Chamber
MXE EMI Receiver
Agilent Technologies N9038A SEM004-05 2019-09-24 2020-09-23
(20Hz-8.4GHz)
BiConiLog Antenna
ETS-LINDGREN 3142C SEM003-01 2017-06-27 2020-06-26
(26-3000MHz)
Pre-amplifier
Agilent Technologies 8447D SEM005-01 2019-04-01 2020-03-31
(0.1-1300MHz)
Measurement N/A
AUDIX e3 V8.2014-6-27 N/A N/A
Software
Coaxial Cable SGS N/A SEM025-01 2019-07-11 2020-07-10
15.203 requirement:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of a permanently attached antenna or of an
antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so
that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical
connector is prohibited.
6.1.2 Conclusion
Standard Requirement:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of a permanently
attached antenna or of an antenna that uses a unique coupling to the intentional radiator, the
manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use
of a standard antenna jack or electrical connector is prohibited.
EUT Antenna:
The antenna is integrated on the main PCB and no consideration of replacement. The best case gain
of the antenna is 0dBi.
Antenna location: Refer to Internal photos.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 12 of 44
Mode:a; Channel:Low
Mode:a; Channel:middle
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 14 of 44
Mode:a; Channel:High
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 15 of 44
Average value:
Average value=Peak value + PDCF
Calculate Formula: PDCF=20 log(Duty cycle)
Duty cycle= T on time / T period
Ton time =2.22ms
Test data: T period =15.18ms
PDCF value= -16.70dB
Duty cycle test plots:
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 18 of 44
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 19 of 44
Remark:
1) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic
equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor
2) The peak field strength of any emission shall not exceed the maximum permitted average limits specified
above by more than 20 dB under any condition of modulation. So, only the above measurement data
were shown in the report.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 25 of 44
Average value:
Average value=Peak value + PDCF
Calculate Formula: PDCF=20 log(Duty cycle)
Duty cycle= T on time / T period
Ton time =2.22ms
Test data: T period =15.18ms
PDCF value= -16.70dB
Duty cycle test plots:
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 28 of 44
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 29 of 44
Remark:
3) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic
equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor
4) The peak field strength of any emission shall not exceed the maximum permitted average limits specified
above by more than 20 dB under any condition of modulation. So, only the above measurement data
were shown in the report.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 33 of 44
Remark:
1) For emission below 1GHz, through pre-scan found the worst case is the lowest channel. Only the
worst case is recorded in the report.
2) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The
basic equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor
3) Scan from 9kHz to 25GHz, the disturbance above 18GHz and below 30MHz was very low. The
points marked on above plots are the highest emissions could be found when testing, so only above
points had been displayed. The amplitude of spurious emissions from the radiator which are
attenuated more than 20dB below the limit need not be reported.
4) For frequencies above 1GHz, the field strength limits are based on average limits. However, the
peak field strength of any emission shall not exceed the maximum permitted average limits specified
above by more than 20 dB under any condition of modulation. For the emissions whose peak level is
lower than the average limit, only the peak measurement is shown in the report.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 36 of 44
Mode:a; Polarization:Vertical
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM191101993702
Page: 38 of 44
8 Photographs
8.1 Radiated Emissions Test Setup
Please refer to setup photos.