Professional Documents
Culture Documents
Scope of Work Street Light
Scope of Work Street Light
MECHANICAL HARDWARE
A vented, acid proof and corrosion resistant metallic box with a locking
arrangement for outdoor use should be provided for housing the
battery
The metallic arm for holding the light assembly should be set at a suitable
angle to maximize uniform illumination of desired level over the specified
area (4 meter wide road). The arm length of luminary holder from pole
should be 0.5 meter for it
s easy approachability for repairing and
replacement.
INDICATORS
I. The system should have two indicators, green and red.
II
.
The green indicator should indicate the charging under progress and should
glow only when the charging is taking place. It should stop glowing when the
battery is fully charged.
III. Red indicator should indicate the battery “Load Cut
9
.
ELECTRIC CABLE
The electric cable used shall be twin core PVC insulated water and UV resistance
copper cable of minimum size 1.5mm.
NSTALLATION OF SYSTEM:
The system should be properly installed at site. The PV module mounting
structure along with pole should be properly grouted depending upon the
location and requirement of the site.