Professional Documents
Culture Documents
Solar Power Manager (C) - Waveshare Wiki
Solar Power Manager (C) - Waveshare Wiki
com/wiki/Solar_Power_Manager_(C)
SAFETY CAUTION
▪ Li-ion and Li-po batteries are quite unstable. They may cause fire, personal
injury, or property damage if they're not properly recharged or used.
▪ Do not reversely connect the polarities when recharging or discharging the
battery. Do not use an inferior charger/charging panel to recharge the battery.
▪ Do not mix use old batteries with new ones, avoid using batteries of different
brands.
▪ When buying a Lithium battery, should always make sure the battery
specification is compatible with the expansion board. Choose batteries from the
formal manufacturer, and ensure the batteries will work stably and safely by
aging test.
▪ Lithium batteries have limited cycle life, they will also deteriorate as time goes
by. Should be replaced with new ones when the batteries reach their max cycle
1 of 9 28/05/2023, 14:38
Solar Power Manager (C) - Waveshare Wiki https://www.waveshare.com/wiki/Solar_Power_Manager_(C)
Features
Specification
2 of 9 28/05/2023, 14:38
Solar Power Manager (C) - Waveshare Wiki https://www.waveshare.com/wiki/Solar_Power_Manager_(C)
(/wiki/File:Solar_Power_Manager_(C)_Spec.png)
Onboard Respurce
3 of 9 28/05/2023, 14:38
Solar Power Manager (C) - Waveshare Wiki https://www.waveshare.com/wiki/Solar_Power_Manager_(C)
(/wiki/File:Solar_Power_Manager_C_Guides02.png)
Capacity indicators
75~100% ON ON ON ON
50~75% ON ON ON OFF
How to use
4 of 9 28/05/2023, 14:38
Solar Power Manager (C) - Waveshare Wiki https://www.waveshare.com/wiki/Solar_Power_Manager_(C)
1. Turn the switch to ON and press the BOOT button. The LEDs will turn on and
indicate the capacity.
2. Connect the solar panel to DC-002 or the screw terminal with the adapter. If the
connection is correct, the Solar Charger indicator turns on. If you reverse the
connection, the Solar Warning indicator will turn on. The Solar Done indicator
will turn on if the battery is fully charged and turns off the Solar Charge
indicator.
3. If you connect the power adapter to the TYPE-C interface, the Quick LED
indicates the fast charge mode. The LED is off if your charger doesn't support a
fast charge. The indicators of capacity flashing when charging and turn off when
fully charging.
4. The Type-C interface can only be used for discharging, you can connect it to
power other USB devices.
5. USB -OUT interface can be used for powering other USB devices.
Notices:
This board can be used with Solar Powering Applications for MCU and SBC like
Raspberry Pi/ Jetson Nano / Arduino and so on.
5 of 9 28/05/2023, 14:38
Solar Power Manager (C) - Waveshare Wiki https://www.waveshare.com/wiki/Solar_Power_Manager_(C)
(/wiki/File:Solar-Power-Manager-C-details-7.jpg)
If you need to change the input voltage of the solar panel, you need to take apart
the case and change the setting of the DIP switch in PCBA, For example, if you
want to change the voltage to 18V:
6 of 9 28/05/2023, 14:38
Solar Power Manager (C) - Waveshare Wiki https://www.waveshare.com/wiki/Solar_Power_Manager_(C)
(/wiki/File:Solar-Power-Manager-C-details-3.jpg)
Dimensions
7 of 9 28/05/2023, 14:38
Solar Power Manager (C) - Waveshare Wiki https://www.waveshare.com/wiki/Solar_Power_Manager_(C)
(/wiki/File:Solar_Power_C09.jpg)
FAQ
Question:How long does Solar Power Manager (C) take to be fully
charged?
Answer:
Answer:
8 of 9 28/05/2023, 14:38
Solar Power Manager (C) - Waveshare Wiki https://www.waveshare.com/wiki/Solar_Power_Manager_(C)
2A.
Answer:
About 1 hour.
Support
If you require technical support, please go to the Support (https://su
pport.waveshare.com/hc/en-us/requests/new) page and open a
ticket.
9 of 9 28/05/2023, 14:38