Professional Documents
Culture Documents
BGS-AU-051 Rev B
BGS-AU-051 Rev B
CONTENTS
1.0 PURPOSE................................................................................................................................. 3
8.0 DOCUMENTATION............................................................................................................... 5
10.0 CONCRETE............................................................................................................................. 6
10.1 FINISH ..............................................................................................................................................6
10.2 FRAME .............................................................................................................................................6
10.3 PRE-CAST PANELS .......................................................................................................................6
1.0 PURPOSE
The purpose of this document is to define the technical requirements for the minimum
criteria for the Cast-in-place and Pre-cast Concrete for structural building frame, roof,
floor, slabs on grade and other concrete components associated with buildings on the
Borouge 2 Project. It is provided to the CONTRACTOR for the specification and
definition of the COMPANY’S minimum requirements for the WORKS.
2.1 DEFINITIONS
For the purposes of this specification, the following definitions shall apply:
COMPANY – means Abu Dhabi Polymers Company Limited (Borouge) and its
successors in interest.
CONCESSION REQUEST – refers to a technical or other deviation requested by the
CONTRACTOR or VENDOR to COMPANY. Its submission is often linked to an
authorization to modify the design, to use, repair, recondition, reclaim, or release
materials, components or equipment already in progress or completely manufactured but
which does not meet or comply with COMPANY requirements. A CONCESSION
REQUEST is subject to COMPANY approval.
CONTRACTOR – means a party contracted to COMPANY to carry out work or services
to the Project.
GOODS – means any and all things, including but not limited to materials and equipment
(including spare parts) required to be incorporated in the WORK.
PROJECT – means the Borouge 2 Project at Ruwais, Abu Dhabi, UAE.
VENDOR – means any and all persons, firms, partnerships, companies, bodies, entities
or a combination thereof including sub-vendors and suppliers, who are providing
GOODS, and the successors and assigns of such persons, firms, partnerships, companies,
bodies, entities or a combination thereof.
Shall and Must– indicate a mandatory requirement.
In addition, supplementary definitions are contained in Article 1 of the AGREEMENT.
2.2 ABBREVIATIONS
The edition or revision of the Codes and Standards shall be the edition current at the
EFFECTIVE DATE of the AGREEMENT.
CONTRACTOR shall advise COMPANY of any changes to Codes and Standards after
the EFFECTIVE DATE. CONTRACTOR shall comply with COMPANY instruction to
comply with any changed Codes and Standards.
CONTRACTOR shall advise of conflict among any referenced Codes and Standards and
any technical specification, and COMPANY will determine which shall govern.
The edition or revision of the Reference Documents shall be the edition current at the
EFFECTIVE DATE of the AGREEMENT.
CONTRACTOR shall advise COMPANY of any changes to Reference Documents after
the EFFECTIVE DATE. CONTRACTOR shall comply with COMPANY instruction to
comply with any changed Referenced Documents.
CONTRACTOR shall advise of conflict among any Reference Documents and any
technical specification, and COMPANY will determine which shall govern.
8.0 DOCUMENTATION
CONTRACTOR and VENDOR shall comply with the requirements of the “Procedure
for Document and Drawing Format” BPM-GG-03-005, “Document Numbering
Procedure” BPM-GG-03-001 and “Document Issuing Procedure CONTRACTORS”
BPM-GG-03-008.
10.0 CONCRETE
10.1 FINISH
10.2 FRAME
The concrete framed building shall be constructed in accordance with Project General
Specification “Concrete Construction, Formwork and Coatings” BGS-CU-010.
Pre-cast concrete panels shall be manufactured in a central plant with procedures and
methods of quality control.
All pre-cast shall be cast in watertight forms to provide a finish with a dense texture, free
of honeycombing and excess air holes and have an integral colour to be selected by the
COMPANY.
The panel joints shall be filled with grout with no voids remaining.