Engine oil selection for a 4RUNNER should be API grade SH, SJ, or ILSAC multigrade oil with a recommended viscosity of SAE 5W-30. SAE 5W-30 provides good fuel economy and cold weather starting. While SAE 10W-30 could be used, it may cause starting issues in extremely low temperatures so SAE 5W-30 is recommended. Oil containers will be marked with the API service symbol and/or ILSAC certification mark to indicate the recommended oil type and grade.
Engine oil selection for a 4RUNNER should be API grade SH, SJ, or ILSAC multigrade oil with a recommended viscosity of SAE 5W-30. SAE 5W-30 provides good fuel economy and cold weather starting. While SAE 10W-30 could be used, it may cause starting issues in extremely low temperatures so SAE 5W-30 is recommended. Oil containers will be marked with the API service symbol and/or ILSAC certification mark to indicate the recommended oil type and grade.
Engine oil selection for a 4RUNNER should be API grade SH, SJ, or ILSAC multigrade oil with a recommended viscosity of SAE 5W-30. SAE 5W-30 provides good fuel economy and cold weather starting. While SAE 10W-30 could be used, it may cause starting issues in extremely low temperatures so SAE 5W-30 is recommended. Oil containers will be marked with the API service symbol and/or ILSAC certification mark to indicate the recommended oil type and grade.
Engine oil selection for a 4RUNNER should be API grade SH, SJ, or ILSAC multigrade oil with a recommended viscosity of SAE 5W-30. SAE 5W-30 provides good fuel economy and cold weather starting. While SAE 10W-30 could be used, it may cause starting issues in extremely low temperatures so SAE 5W-30 is recommended. Oil containers will be marked with the API service symbol and/or ILSAC certification mark to indicate the recommended oil type and grade.
Use API grade SH, "Energy−Conserving II" Either or both API registered marks are or SJ, Energy−conserving" multigrade en- added to some oil containers to help gine oil or ILSAC multigrade engine oil. you select the oil you should use. Recommended viscosity (SAE): The API Service Symbol is located any- where on the outside of the container. The top portion of the label shows the oil quality by API (American Petroleum Insti- tute) designations such as SJ. The center portion of the label shows the SAE viscosity grade such as SAE 5W−30. "Energy−Conserving" shown in the lower portion, indicates that the oil has fuel−sav- API service symbol ing capabilities. The ILSAC (International Lubricant Stan- SAE 5W−30 is the best choice for your dardization and Approval Committee) Certi- vehicle, for good fuel economy and fication Mark is displayed on the front of good starting in cold weather. the container.
If you use SAE 10W−30 engine oil in
extremely low temperatures, the engine may become difficult to start, so SAE 5W−30 engine oil is recommended.