Professional Documents
Culture Documents
MEPA-Seismic Snubber Eng
MEPA-Seismic Snubber Eng
MEPASISMO
MS-C TYPE SNUBBER
As the part of the Mepa Sismo Family, Mepa Type Seismic Snubbers
protects equipments shifting and overturning with earthquake or
wind load. Resilient neoprene pads at all contact surfaces reduce
shock loads by cushioning any potential impacts also prevent
vibration transfer to the structure. Foundation anchor bolt holes allow
loads to be safely transferred to the building structure.
The snubbers has tested in accordance with ANSI-ASHRAE
regulation capacities.
According to the intended use of the product type, shear-
compression-tension strength capacities determined under loads.
The design capacities have been reached by dividing test capacity by
1.5 safety factor.
MEPA - SEISMIC SNUBBER
A TYPE SEISMIC SNUBBER
MEPASISMO
vertical movements and prevents equipment from
overturning by providing protection against the
rotational moment on the equipment.
Due to test result which is tested Test Angle Capacity kgf
at ITU Aeronatics and
0° LOADİNG 2.664
Astronautics Faculty and with
the surveillance TUV Austria;
Capacity A
B
C D E
0° LOADİNG 6.666
Astronautics Faculty and with
the surveillance TUV Austria;
Capacity A
B
C D E
MEPASISMO
with the help of rubber gasket used in bolt connection
between equipment and snubber, it prevents the
transfer vibration to the structural elements.
Capacity A
B
C D E