Professional Documents
Culture Documents
DGS Fire Protection & Detection Boq
DGS Fire Protection & Detection Boq
DGS Fire Protection & Detection Boq
SUPPLY INSTALLATION
SL.NO DESCRIPTION UNIT QTY Make
UNIT RATE AMOUNT UNIT RATE AMOUNT
A HYDRANT SYSTEM
1.0 Supplying, installing, testing and commissioning of G.I. Pipes confirming to IS
1239 Pt - I Heavy grade with painting, suitable type of supports ( Shall be
fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor
fasteners, bolts nuts, clamps, "U" bolte, malleable specials such as
Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls,
ceiling by using suitable supports etc, as per drawings. The quoted rate shall
also include for chasing / chipping walls, making bore holes in walls / floor and
making them good with filler material and finished in cement morter etc.
complete.
a 150mm nominal dia Rmt 800 JINDAL 2150 1720000 400 320000
b 100mm nominal dia Rmt 10 JINDAL 1500 15000 300 3000
c 25mm nominal dia Rmt 10 JINDAL 421 4210 100 1000
2.0 Supplying, installing, testing and commissioning of G.I. Pipes confirming to IS
1239 Pt - I Heavy grade with suitable type of supports, malleable specials such
as Reducers,Tees, elbows, flanges. Including cutting, Welding as per drawings.
The rate quoted should e included with anticorrosive treatment with 4 mm
thick polymer corrosion resistant tape as per IS 10221, overlap shall be 15mm
minimum.
a 150mm nominal dia Rmt 300 JINDAL 2650 795000 500 150000
4.0 Supplying, installing, testing and commissioning of C.I. Non-return valves as per
IS:5312( PN 16) Swing check type with required flanges, nuts, bolts and gaskets
etc. complete.
a 150 mm nominal dia Nos. 4 ZOLOTO 6872 27488 1000 4000
v Fire duct Shutter fabricated out of M.S.sheet and frame, door shall be 900mm x
1200 mm min. & fixed with 4 mm thick Glass, suitable Rubber beedibg and
Locking arrangement. Quoted rate shall be includes all fasteners etc, and
complete shutter shall be powder coated of approved colour both inside and Nos. 16 Fabbricated. 9500 152000 1000 16000
out side.
6.0 Supplying, installing and commissioning of fire brigade inlet inlet connection of
4 way with 4 nos. 63 mm dia. built - in Gun metal Non- return valves
instantaneous coupling type arranged on 150 mm dia. Pipe manifold and
connected to wet riser main as well as to Fire water tank. Qouted rate shall be
included with C.I. Butterfly valve, C.I. Non-return valve and M.S. cabinet of Nos. 1 WINMAX 25650 25650 5000 5000
suitable size with mounting supports etc. complete.
8.0 Supplying and fixing approved make 25mm dia. With automatic air release
valve with unions etc. complete. Nos. 4 1200 4800 100 400
TOTAL FOR PART - A ( Carried forward to summary ) 3203388 538800
B FIRE EXTINGUISHERS
1.0 Supplying, installing and commissioning Portable Fire extinguishers of
following type & capacity.
a Carbon-di- oxide type fire extinguisher of 2 kgs. Capacity, CO2 gas filled in brand
new seamless cylinder with powder coated finish, made out of Manganese steel,
with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. Nos. 16 4400 70400 100 1600
complete, confirming to IS: 2878.
b Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in
brand new seamless cylinder with powder coated finish, made out of
Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal Nos. R.only
mounting bracket etc. complete, confirming to IS: 2878.
c Water CO2 type fire extinguisher 9 lts. Capacity, initial filling in brand new
cylinder of powder coated finish, fitted with Gun metal union, high pressure
CO2 gas cartridge & wall mounting bracket etc. complete confirming to IS:940. Nos. 24 3200 76800 100 2400
C SIGNAGES
1.0 Providing and installing in position the following type of sign boards made out
of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective
self adhesive vinyle painted foam board, complete with mirror fasteners.
a. Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED
OTHERWISE" of 1.5cm height letters in red with white back ground.The size of
the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from Nos. 24 550 13200 100 2400
finished floor near Manual call points.
63
b. Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure
on every floor, indicating the floor number in words, lettering size shall be 7.5
cm with contrasting colour from back ground.Size shall be 15cm x 60cm. Nos. 24 750 18000 100 2400
2.0 Providing and fixing in position the signages " FIRE ORDER" it should contain
the following matter on 3mm thick "Opaque" PVC foam board of computerised
cut, PVC non-reflective self adhesive vinyle painted foam board of 3' x 4'.
D) BE CALM AND DO NOT GIVE ANY ROOM FROM PANIC, WALK, DO NOT RUN.
D CIVIL WORKS
1.0 Exacavation of trenches up to 1.5 mts. in depth, for laying pipes upto 150mm
dia. Including forming bottom surface to required level, refilling the trenches
with selected excavated earth around th pipe in layers of 150mm thick,
watering, consolidating. Quoted price inclusive of disposing off / Carting away
the surplus earth out side the site to a dump yard acceptable local bodies or as
directed by the site engineer with a lead of 300 mts. etc. complete.
3.0 Supply & Construction of valve chamber with 230 mm Brick masonry wall with
best quality TM bricks & CM 1:4,on a PCC 1:4;8 bed of 100 mm thcik.The wall
shall be plastered internally smooth in CM 1:3, water proofing as required and
externally rough plastered with sponge finish, including curing. The chamber
shall be provided with M.S. 6 / 8 mm thick plate fabricated top cover in leaves
with neccessory hinges and locking arrangement. The size of the chamber shall Nos. 2 5900 11800 1500 3000
be 1200mm x 1200mm x1500mm in depth.
4.0 Supplyand construction of PCC (1:2:4) pedastals / supports for Under ground /
above ground pipes. Quoted rate shall inclusive of excavation ( if required ),
chipping / chasing, shuttering, plastering ( if required) etc. complete. cum 2 5900 11800 1500 3000
5.0 Sealing of Fire shafts at all floor levels by using M.S. angle Iorn frame around the
shaft, M.S. chequered plate and PCC of 1:2:4 ( 100mm thick) on the plate for
whole shaft area as per drawings and engineer - in - charge. Sq.mts 20 5900 118000 1500 30000
2.0 Cost for addition / deletion of extra Loop cards in to the panel mentioned above.
No R.only
3.0 Supply and installation of software for programming( mapping) the Fire
detection and voice alarm system thorugh FACP / Lap top. The software shall
consisting with facility like Upload / down load of informations to FACP,
Graphics compatible to autocad, Detectors information with change in address / No 1 190500 190500 2000 2000
sensitivity etc as reuired.
4.0 Addressable Smoke detector with multiple sensitivity( adjustable at site) levels,
programmable for timed automatic sensitivity selection with base, Junction box
and other accessories as required and detectors shall be UL listed, Nos 706 2100 1481760 350 246960
4.1 Addressable heat detector with multiple sensitivity( adjustable at site) levels,
programmable for timed automatic sensitivity selection with base, Junction box
and other accessories as required and detectors shall be UL listed, Nos R.only
8.0 Horn / Strobe rated at 82 dBA @ 3m for Audible annunciation and 75cd
flashintg at 1 Hz for visual indication. Nos 40 2250 90000 350 14000
9.0 Addressable Single action Manual pull station having an integrally mounted
addressabla module that monitors and reports contact status. Nos 40 2650 106000 350 14000
10.0 Supplying, installing, testing and commissioning of 2 runs of 1.5 sq. mm,
armored copper cables confirming to IS standards and specifications. Rmt 7070 110 777700 30 212100
64
b 25 mm dia. Rmt R.only GUPTA
c 19 mm dia. Rmt 0 GUPTA
13.0 Supplying and fixing of PC Pentium IV ,with 933 MHZ, 256 MB RAM,20 GB, HD,
17" monitor, 132 column colour dot matrix printer shall also be supplied. Nos 1 HP/DELL 45000 45000 2500 2500
Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle
iron suspension supports, anchor fasteners etc. complete. Maximum height of
suspension shall not exceed 600 mm.Size of the tray is 40mm x 200mm x 40mm Rmt 50 470 23500 80 4000
and 2mm thick.
F P.A. SYSTEM
1.0 Supplying, installing, testing and commissioning of 24 zone selector P.A. console
and with CRCA sheet housing and control desk( rack) and mic as required.
Console shall have all call / call back facility complete with battery back up and No 1 HEI 78500 78500 5000 5000
it should also work on AC single phase power.
2.0 Supplying, installing, testing and commissioning solid state Amplifier of 400 W
RMS out put in rack, including necessory control wires, jocks etc. complete. No 1 BOSCH 35100 35100 2000 2000
4.0 Supplying, installing, testing and commissioning 40 strand twin core control
cables of PVC insulated copper conductor, Confirming to IS 1554, as per
specification.These wires shall be laid along with wiring of Hooters / strobes of Rmt 450 VARSHA 110 49500 30 13500
detection system.
65
Project SECRETARIAT BUILDING AT IMPHAL
Architect Mr. RAGHUNATH
Description FIRE PRTECTION & DETECTION BOQ
Company Damia Global Services Pvt ltd
SUPPLY INSTALLATION
SL.NO DESCRIPTION UNIT QTY Make
UNIT RATE AMOUNT UNIT RATE AMOUNT
A HYDRANT SYSTEM
1.0 Supplying, installing, testing and commissioning of G.I. Pipes confirming to IS
1239 Pt - I Heavy grade with painting, suitable type of supports ( Shall be
fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor
fasteners, bolts nuts, clamps, "U" bolte, malleable specials such as
Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls,
ceiling by using suitable supports etc, as per drawings. The quoted rate shall
also include for chasing / chipping walls, making bore holes in walls / floor and
making them good with filler material and finished in cement morter etc.
complete.
a 150mm nominal dia Rmt 900 JINDAL 2150 1935000 400 360000
b 100mm nominal dia Rmt 10 JINDAL 1500 15000 300 3000
c 25mm nominal dia Rmt 10 JINDAL 421 4210 100 1000
2.0 Supplying, installing, testing and commissioning of G.I. Pipes confirming to IS
1239 Pt - I Heavy grade with suitable type of supports, malleable specials such
as Reducers,Tees, elbows, flanges. Including cutting, Welding as per drawings.
The rate quoted should e included with anticorrosive treatment with 4 mm
thick polymer corrosion resistant tape as per IS 10221, overlap shall be 15mm
minimum.
a 150mm nominal dia Rmt 425 JINDAL 2650 1126250 500 212500
4.0 Supplying, installing, testing and commissioning of C.I. Non-return valves as per
IS:5312( PN 16) Swing check type with required flanges, nuts, bolts and gaskets
etc. complete.
a 150 mm nominal dia Nos. 4 ZOLOTO 6872 27488 1000 4000
v Fire duct Shutter fabricated out of M.S.sheet and frame, door shall be 900mm x
1200 mm min. & fixed with 4 mm thick Glass, suitable Rubber beedibg and
Locking arrangement. Quoted rate shall be includes all fasteners etc, and
complete shutter shall be powder coated of approved colour both inside and Nos. 16 Fabbricated. 9500 152000 1000 16000
out side.
6.0 Supplying, installing and commissioning of fire brigade inlet inlet connection of
4 way with 4 nos. 63 mm dia. built - in Gun metal Non- return valves
instantaneous coupling type arranged on 150 mm dia. Pipe manifold and
connected to wet riser main as well as to Fire water tank. Qouted rate shall be
included with C.I. Butterfly valve, C.I. Non-return valve and M.S. cabinet of Nos. 1 WINMAX 25650 25650 5000 5000
suitable size with mounting supports etc. complete.
8.0 Supplying and fixing approved make 25mm dia. With automatic air release
valve with unions etc. complete. Nos. 0 6 1200 0 100 0
TOTAL FOR PART - A ( Carried forward to summary ) 3663838 632700
B FIRE EXTINGUISHERS
1.0 Supplying, installing and commissioning Portable Fire extinguishers of
following type & capacity.
a Carbon-di- oxide type fire extinguisher of 2 kgs. Capacity, CO2 gas filled in brand
new seamless cylinder with powder coated finish, made out of Manganese steel,
with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. Nos. 16 4400 70400 100 1600
complete, confirming to IS: 2878.
b Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in
brand new seamless cylinder with powder coated finish, made out of
Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal Nos. R.only
mounting bracket etc. complete, confirming to IS: 2878.
c Water CO2 type fire extinguisher 9 lts. Capacity, initial filling in brand new
cylinder of powder coated finish, fitted with Gun metal union, high pressure
CO2 gas cartridge & wall mounting bracket etc. complete confirming to IS:940. Nos. 24 3200 76800 100 2400
C SIGNAGES
1.0 Providing and installing in position the following type of sign boards made out
of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective
self adhesive vinyle painted foam board, complete with mirror fasteners.
a. Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED
OTHERWISE" of 1.5cm height letters in red with white back ground.The size of
the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from Nos. 24 550 13200 100 2400
finished floor near Manual call points.
b. Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure
on every floor, indicating the floor number in words, lettering size shall be 7.5
cm with contrasting colour from back ground.Size shall be 15cm x 60cm. Nos. 24 750 18000 100 2400
2.0 Providing and fixing in position the signages " FIRE ORDER" it should contain
the following matter on 3mm thick "Opaque" PVC foam board of computerised
cut, PVC non-reflective self adhesive vinyle painted foam board of 3' x 4'.
63
C) IF POSSIBLE TRY TO EXTINGUISH THE FIRE BY USING NEAREST / SUITABLE
PORTABLE EXTINGUISHER OR WATER FROM NEAREST WET RISER.
64
D) BE CALM AND DO NOT GIVE ANY ROOM FROM PANIC, WALK, DO NOT RUN.
D CIVIL WORKS
1.0 Exacavation of trenches up to 1.5 mts. in depth, for laying pipes upto 150mm
dia. Including forming bottom surface to required level, refilling the trenches
with selected excavated earth around th pipe in layers of 150mm thick,
watering, consolidating. Quoted price inclusive of disposing off / Carting away
the surplus earth out side the site to a dump yard acceptable local bodies or as
directed by the site engineer with a lead of 300 mts. etc. complete.
3.0 Supply & Construction of valve chamber with 230 mm Brick masonry wall with
best quality TM bricks & CM 1:4,on a PCC 1:4;8 bed of 100 mm thcik.The wall
shall be plastered internally smooth in CM 1:3, water proofing as required and
externally rough plastered with sponge finish, including curing. The chamber
shall be provided with M.S. 6 / 8 mm thick plate fabricated top cover in leaves
with neccessory hinges and locking arrangement. The size of the chamber shall Nos. 2 5900 11800 1500 3000
be 1200mm x 1200mm x1500mm in depth.
4.0 Supplyand construction of PCC (1:2:4) pedastals / supports for Under ground /
above ground pipes. Quoted rate shall inclusive of excavation ( if required ),
chipping / chasing, shuttering, plastering ( if required) etc. complete. cum 2 5900 11800 1500 3000
5.0 Sealing of Fire shafts at all floor levels by using M.S. angle Iorn frame around the
shaft, M.S. chequered plate and PCC of 1:2:4 ( 100mm thick) on the plate for
whole shaft area as per drawings and engineer - in - charge. Sq.mts 20 5900 118000 1500 30000
2.0 Cost for addition / deletion of extra Loop cards in to the panel mentioned above.
No R.only
3.0 Supply and installation of software for programming( mapping) the Fire
detection and voice alarm system thorugh FACP / Lap top. The software shall
consisting with facility like Upload / down load of informations to FACP,
Graphics compatible to autocad, Detectors information with change in address / No 1 190500 190500 2000 2000
sensitivity etc as reuired.
4.0 Addressable Smoke detector with multiple sensitivity( adjustable at site) levels,
programmable for timed automatic sensitivity selection with base, Junction box
and other accessories as required and detectors shall be UL listed, Nos 567 2100 1190700 350 198450
4.1 Addressable heat detector with multiple sensitivity( adjustable at site) levels,
programmable for timed automatic sensitivity selection with base, Junction box
and other accessories as required and detectors shall be UL listed, Nos R.only
7.0 Horn / Strobe rated at 82 dBA @ 3m for Audible annunciation and 75cd
flashintg at 1 Hz for visual indication. Nos 20 2250 45000 350 7000
8.0 Addressable Single action Manual pull station having an integrally mounted
addressabla module that monitors and reports contact status. Nos 20 2650 53000 350 7000
9.0 Supplying, installing, testing and commissioning of 2 runs of 1.5 sq. mm,
armored copper cable wires confirming to IS standards and specifications. Rmt 6050 110 665500 30 181500
12.0 Supplying and fixing of PC Pentium IV ,with 933 MHZ, 256 MB RAM,20 GB, HD,
17" monitor, 132 column colour dot matrix printer shall also be supplied. Nos 1 HP/DELL 45000 45000 2500 2500
Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle
iron suspension supports, anchor fasteners etc. complete. Maximum height of
suspension shall not exceed 600 mm.Size of the tray is 40mm x 200mm x 40mm Rmt 25 470 11750 80 2000
and 2mm thick.
F P.A. SYSTEM
1.0 Supplying, installing, testing and commissioning of 20 zone selector P.A. console
and with CRCA sheet housing and control desk( rack) and mic as required.
Console shall have all call / call back facility complete with battery back up and No 1 HEI 78500 78500 5000 5000
it should also work on AC single phase power.
2.0 Supplying, installing, testing and commissioning solid state Amplifier of 400 W
RMS out put in rack, including necessory control wires, jocks etc. complete. No 1 BOSCH 35100 35100 2000 2000
65
4.0 Supplying, installing, testing and commissioning 40 strand twin core control
cables of PVC insulated copper conductor, Confirming to IS 1554, as per
specification.These wires shall be laid along with wiring of Hooters / strobes of Rmt 250 VARSHA 110 27500 30 7500
detection system.
66
Project SECRETARIAT BUILDING AT IMPHAL
Architect Mr. RAGHUNATH
Description SUMMARY SHEET
Company Damia Global services Pvt Ltd
SUPPLY INSTALLATION
SL.NO DESCRIPTION UNIT QTY Make
UNIT RATE AMOUNT UNIT RATE AMOUNT
PART - A FIRE PUMP ROOM EQUIPMENT
1.0 Supply, erection, testing & commissioning of electrical motor driven main pump
of horizontal centrifugal end suction backpull out type with gland packing and
capable to deliver 22800LPM at 80 MWC.The pump shall be coupled to TEFC
motor of suitable HP with speed of 2900 RPM and complete set shall mounted
on common base frame. The quoted rate shall includes providing & fixing of
coupling, coupling gaurd, RCC foundation( as recommended by manufacturer) Nos. 2 kirloskar 245000 490000 28000 56000
and Foundation bolts etc.complete.
2.0 Supply, installation, testing & commissioning of diesel Engine driven common
stand by pump, horizontal centrifugal end suction backpull out type with gland
packing and capable to deliver 2280 LPM at 80 MWC. The pump shall coupled to
suitable HP of Diesel engine radiator water cooled type with speed of1800RPM
and complete set shall be mounted on common base frame. Batteries & battery
leads with stand, Fuel tank ( for 6 Hrs. operation ) with stand & gauge glass,
Fuel piping with valves. The quoted rate shall includes radiator water cooling
piping(if reqired) coupling gaurd and other stanadrd accessories,RCC No. 2 kirloskar 485600 971200 28000 56000
foundation (as recommended by manufacturer) and foundation bolts, etc.
complete.
3.0 Supply, erection, testing & commissioning of electrical motor driven Jockey
pump of horizontal centrifugal end suction back pull out type with gland
packing and capable to deliver 180LPM at 80 MWC.The pump shall be coupled
to TEFC motor of suitableHPwith speed of 2900RPM and complete set shall
mounted on common base frame. The quoted rate shall includes providing &
fixing of coupling, coupling gaurd, RCC foundation( as recommended by No. 2 kirloskar 90550 181100 12000 24000
manufacturer) and Foundation bolts etc.
4.0 Supply, erection, testing & commissioning of electrical motor driven Booster
pump of Monoblock type capable to deliver 900 LPM at 35 MWC.The pump
shall be coupled to TEFC motor of suitable HP with speed of 2900RPM and
complete set shall mounted on common base frame. The quoted rate shall
includes providing & fixing of RCC foundation( as recommended by Nos 3 kirloskar 40340 121020 5000 15000
manufacturer) and Foundation bolts etc.
Also panel shall have sufficient (min. 6Nos per pumpset) NO/NC contacts for
extending the status of fire pumps to the Fire alarm panel. Provision for the
emergency light point should be considered.
6.0 Supply, Erection of emergency Start / Stop Push Button station weather proof
type for Booster pump at terrace level. No. 2 4500 9000 500 1000
63
Supplying, laying, testing & commissioning of FRLS,PVC outer sheateh, steel
armoured, aluminium conductor, 1100v grade power cables with glands
etc.The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc.
as required. For cables laid out door the rate shall include earth excavation
providing brick and sand protection, refilling and compacting the earth.The rate
shall excludes tray & Hume pipes.The minimum size of the cables shall as
mentioned below,
a 3.5C x 95 sq.mm for Main pumps Rmt 100 498 49800 50 5000
b 3.0C x 10 Sqmm. Jockey pumps Rmt 50 180 9000 50 2500
c 12 C x 2.5 Sqmm.Diesel engines Rmt 50 415 20750 50 2500
d 2 C x 2.5 Sqmm.for Instrumentation Rmt 60 122 7320 50 3000
e 3 C x 2.5 Sqmm. For start / stop push buttons Rmt 150 148 22200 50 7500
9.0 G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling /
walls, from the equipment to the nearest Earth pit with neccessory accessories
as required. ( Erath pit shall be executed by other agencies). Rmt 100 175 17500 25 2500
10.0 Supplying, installing, testing and commissioning of M.S. Pipes ( for suction side
of pumps) confirming to IS - 1239 part 1 and 2 for pipe size upto 300 and IS -
3589,6mm thick fopr pipesmore than 300mm dia, with painting, suitable type of
supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolte,
malleable specials such as Reducers,Tees, elbows, flanges. Including cutting,
Welding, fixing in / on walls, ceiling by using suitable supports etc, as per
drawings. The quoted rate shall also include for chasing / chipping walls,
making bore holes in walls / floor and making them good with filler material
and finished in cement morter etc. complete.
11.0 Supplying, installing, testing and commissioning of C.I. Non-return valves as per
IS:5312( PN 12) Swing check type with required flanges, nuts, bolts and gaskets
etc. complete.
a 250 mm nominal dia Nos. 0 ZOLOTO
b 200 mm nominal dia Nos. 2 ZOLOTO 12500 25000 700 1400
c 150 mm nominal dia Nos. 18 ZOLOTO 6872 123699 600 10800
d 100 mm nominal dia Nos. R.only ZOLOTO
e 80 mm nominal dia Nos. 2 ZOLOTO 4200 8400 800 1600
13.0 Supplying, installing and commissioning C.I.flanged "Y" type Strainer with SS
mesh,suitable flanges, nuts, bolts, gaskets etc. complete.
a 250mm dia. Nos. 4 ZOLOTO 38500 154000 2500 10000
14.0 Supply, Erection, Testing and commissioning of C.I.Gate valves as per IS:14846 (
PN 10 Rating, for suction side of the pumps) and rising spindle type with
flanges, bolts, nuts, washers, gaskets etc.The valve shall be fitted with
Supervisory switch for monitoring.
15.0 Supplying, installing, testing and commissioning of Gun metal chrome finished
Ball valves with fittings of screwed end type.
a 15mm dia. Nos. 8 AUDCO 1250 10000 250 2000
b 25 mm dia Nos. 8 AUDCO 2150 17200 250 2000
16.0 Supply, Installation of Flow metre Manual Type on Test line to measure 150 %
of pump flow and suitable to 200 mm dia. No. 2 8869 17738 750 1500
17.0 Supply and installation of Pressure switches of suitable range for pumpsets
with Ball valves, Fittings like unions / colors / reducers etc. Set
a IPS 200 Nos. 14 3250 45500 250 3500
a RT 05 Nos. 4 2150 8600 250 1000
18.0 Supply and installation of Pressure gauges of suitable range for pumpsets with
Ball valves, siphon, Fittings like unions / colors / reducers etc. Set 16 1850 29600 100 1600
19.0 Exhuast pipe for Diesel engine of 150 mm dia M.S. Medium grade with mineral
wool insulation with aluminum sheet.
a 150 mm dia M.S. Medium grade with mineral wool insulation with aluminum
sheeting. Rmt 100 JINDAL 2500 250000 800 80000
b 150mm dia M.S. Medium grade shall be laid above ground with structuralsteel
supports. Rmt 100 JINDAL 2500 250000 800 80000
20.0 Supply and fixing of lever operated Gunmetal ball valve of approved make and
provided with stainless steel ball (AISI 304) and spindle (AISI 410), glass filled
teflon seating and gland packing etc., complete. The valve shall be fixed after
the union. The quoted rate shall include the cost of the union, nipples etc.,
complete.
64
Project SECRETARIAT BUILDING AT IMPHAL
Architect Mr. RAGHUNATH
Description FIRE PROTECTION & DETECTION BOQ
Company Damia Global Service Pvt Ltd
SUPPLY INSTALLATION
SL.NO DESCRIPTION UNIT QTY Make
UNIT RATE AMOUNT UNIT RATE AMOUNT
A HYDRANT SYSTEM
1.0 Supplying, installing, testing and commissioning of G.I. Pipes confirming to IS
1239 Pt - I Heavy grade with painting, suitable type of supports ( Shall be
fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor
fasteners, bolts nuts, clamps, "U" bolte, malleable specials such as
Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls,
ceiling by using suitable supports etc, as per drawings. The quoted rate shall
also include for chasing / chipping walls, making bore holes in walls / floor and
making them good with filler material and finished in cement morter etc.
complete.
a 150mm nominal dia Rmt 800 JINDAL 2150 1720000 400 320000
b 100mm nominal dia Rmt 10 JINDAL 1500 15000 300 3000
c 25mm nominal dia Rmt 10 JINDAL 421 4210 100 1000
2.0 Supplying, installing, testing and commissioning of G.I. Pipes confirming to IS
1239 Pt - I Heavy grade with suitable type of supports, malleable specials such
as Reducers,Tees, elbows, flanges. Including cutting, Welding as per drawings.
The rate quoted should e included with anticorrosive treatment with 4 mm
thick polymer corrosion resistant tape as per IS 10221, overlap shall be 15mm
minimum.
a 150mm nominal dia Rmt 300 JINDAL 2650 795000 500 150000
4.0 Supplying, installing, testing and commissioning of C.I. Non-return valves as per
IS:5312( PN 16) Swing check type with required flanges, nuts, bolts and gaskets
etc. complete.
a 150 mm nominal dia Nos. 4 ZOLOTO 6872 27488 1000 4000
v Fire duct Shutter fabricated out of M.S.sheet and frame, door shall be 900mm x
1200 mm min. & fixed with 4 mm thick Glass, suitable Rubber beedibg and
Locking arrangement. Quoted rate shall be includes all fasteners etc, and
complete shutter shall be powder coated of approved colour both inside and Nos. 16 Fabbricated. 9500 152000 1000 16000
out side.
6.0 Supplying, installing and commissioning of fire brigade inlet inlet connection of
4 way with 4 nos. 63 mm dia. built - in Gun metal Non- return valves
instantaneous coupling type arranged on 150 mm dia. Pipe manifold and
connected to wet riser main as well as to Fire water tank. Qouted rate shall be
included with C.I. Butterfly valve, C.I. Non-return valve and M.S. cabinet of Nos. 1 WINMAX 25650 25650 5000 5000
suitable size with mounting supports etc. complete.
8.0 Supplying and fixing approved make 25mm dia. With automatic air release
valve with unions etc. complete. Nos. 4 6 1200 4800 100 400
TOTAL FOR PART - A ( Carried forward to summary ) 3203388 538800
B FIRE EXTINGUISHERS
1.0 Supplying, installing and commissioning Portable Fire extinguishers of
following type & capacity.
a Carbon-di- oxide type fire extinguisher of 2 kgs. Capacity, CO2 gas filled in brand
new seamless cylinder with powder coated finish, made out of Manganese steel,
with wheel type valve, discharge nozzle, bend & horn, wal mounting bracket etc. Nos. 16 4400 70400 100 1600
complete, confirming to IS: 2878.
b Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas filled in
brand new seamless cylinder with powder coated finish, made out of
Manganese steel, with wheel type valve, discharge nozzle, bend & horn, wal Nos. R.only
mounting bracket etc. complete, confirming to IS: 2878.
c Water CO2 type fire extinguisher 9 lts. Capacity, initial filling in brand new
cylinder of powder coated finish, fitted with Gun metal union, high pressure
CO2 gas cartridge & wall mounting bracket etc. complete confirming to IS:940. Nos. 24 3200 76800 100 2400
C SIGNAGES
1.0 Providing and installing in position the following type of sign boards made out
of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective
self adhesive vinyle painted foam board, complete with mirror fasteners.
a. Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED
OTHERWISE" of 1.5cm height letters in red with white back ground.The size of
the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from Nos. 24 550 13200 100 2400
finished floor near Manual call points.
63
b. Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure
on every floor, indicating the floor number in words, lettering size shall be 7.5
cm with contrasting colour from back ground.Size shall be 15cm x 60cm. Nos. 24 750 18000 100 2400
2.0 Providing and fixing in position the signages " FIRE ORDER" it should contain
the following matter on 3mm thick "Opaque" PVC foam board of computerised
cut, PVC non-reflective self adhesive vinyle painted foam board of 3' x 4'.
D) BE CALM AND DO NOT GIVE ANY ROOM FROM PANIC, WALK, DO NOT RUN.
D CIVIL WORKS
1.0 Exacavation of trenches up to 1.5 mts. in depth, for laying pipes upto 150mm
dia. Including forming bottom surface to required level, refilling the trenches
with selected excavated earth around th pipe in layers of 150mm thick,
watering, consolidating. Quoted price inclusive of disposing off / Carting away
the surplus earth out side the site to a dump yard acceptable local bodies or as
directed by the site engineer with a lead of 300 mts. etc. complete.
3.0 Supply & Construction of valve chamber with 230 mm Brick masonry wall with
best quality TM bricks & CM 1:4,on a PCC 1:4;8 bed of 100 mm thcik.The wall
shall be plastered internally smooth in CM 1:3, water proofing as required and
externally rough plastered with sponge finish, including curing. The chamber
shall be provided with M.S. 6 / 8 mm thick plate fabricated top cover in leaves
with neccessory hinges and locking arrangement. The size of the chamber shall Nos. 2 5900 11800 1500 3000
be 1200mm x 1200mm x1500mm in depth.
4.0 Supplyand construction of PCC (1:2:4) pedastals / supports for Under ground /
above ground pipes. Quoted rate shall inclusive of excavation ( if required ),
chipping / chasing, shuttering, plastering ( if required) etc. complete. cum 2 5900 11800 1500 3000
5.0 Sealing of Fire shafts at all floor levels by using M.S. angle Iorn frame around the
shaft, M.S. chequered plate and PCC of 1:2:4 ( 100mm thick) on the plate for
whole shaft area as per drawings and engineer - in - charge. Sq.mts 20 5900 118000 1500 30000
2.0 Cost for addition / deletion of extra Loop cards in to the panel mentioned above.
No R.only
3.0 Supply and installation of software for programming( mapping) the Fire
detection and voice alarm system thorugh FACP / Lap top. The software shall
consisting with facility like Upload / down load of informations to FACP,
Graphics compatible to autocad, Detectors information with change in address / No 1 190500 190500 2000 2000
sensitivity etc as reuired.
4.0 Addressable Smoke detector with multiple sensitivity( adjustable at site) levels,
programmable for timed automatic sensitivity selection with base, Junction box
and other accessories as required and detectors shall be UL listed, Nos 706 2100 1481760 350 246960
4.1 Addressable heat detector with multiple sensitivity( adjustable at site) levels,
programmable for timed automatic sensitivity selection with base, Junction box
and other accessories as required and detectors shall be UL listed, Nos R.only
8.0 Horn / Strobe rated at 82 dBA @ 3m for Audible annunciation and 75cd
flashintg at 1 Hz for visual indication. Nos 40 2250 90000 350 14000
9.0 Addressable Single action Manual pull station having an integrally mounted
addressabla module that monitors and reports contact status. Nos 40 2650 106000 350 14000
10.0 Supplying, installing, testing and commissioning of 2 runs of 1.5 sq. mm,
armored copper cables confirming to IS standards and specifications. Rmt 7070 110 777700 30 212100
64
b 25 mm dia. Rmt R.only GUPTA
c 19 mm dia. Rmt 0 GUPTA
13.0 Supplying and fixing of PC Pentium IV ,with 933 MHZ, 256 MB RAM,20 GB, HD,
17" monitor, 132 column colour dot matrix printer shall also be supplied. Nos 1 HP/DELL 45000 45000 2500 2500
Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle
iron suspension supports, anchor fasteners etc. complete. Maximum height of
suspension shall not exceed 600 mm.Size of the tray is 40mm x 200mm x 40mm Rmt 50 470 23500 80 4000
and 2mm thick.
F P.A. SYSTEM
1.0 Supplying, installing, testing and commissioning of 24 zone selector P.A. console
and with CRCA sheet housing and control desk( rack) and mic as required.
Console shall have all call / call back facility complete with battery back up and No 1 HEI 78500 78500 5000 5000
it should also work on AC single phase power.
2.0 Supplying, installing, testing and commissioning solid state Amplifier of 400 W
RMS out put in rack, including necessory control wires, jocks etc. complete. No 1 BOSCH 35100 35100 2000 2000
4.0 Supplying, installing, testing and commissioning 40 strand twin core control
cables of PVC insulated copper conductor, Confirming to IS 1554, as per
specification.These wires shall be laid along with wiring of Hooters / strobes of Rmt 450 VARSHA 110 49500 30 13500
detection system.
65