Professional Documents
Culture Documents
H961649 H961610 TaperedRollerBearings TS (TaperedSingle) Imperial
H961649 H961610 TaperedRollerBearings TS (TaperedSingle) Imperial
Part Number H961649 - H961610, Tapered Roller Bearings - TS (Tapered Single) Imperial
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the
cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Specifications | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Specifications
Series H961600
392.70 lb
Bearing Weight
178.1 Kg
Dimensions
12 1/2 in
d - Bore
317.5 mm
7/18/2022 | Page 2 of 4
24.5 in
D - Cup Outer Diameter
622.3 mm
5.1875 in
B - Cone Width
131.763 mm
3.25 in
C - Cup Width
82.55 mm
5.8125 in
T - Bearing Width
147.638 mm
2.38 in
a - Effective Center Location3
60.5 mm
927000 lbf
C0 - Static Radial Rating
4130000 N
Factors
K - Factor7 0.62
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
3.2500
0.84
5.1875
24.5000
12.5000
20.91
14.69
16.14
23.11
2.38
IMPERIAL UNITS
ISO Factor - e 0.94
ISO Factor - Y 0.64 H961649 - H961610
Bearing Weight 392.7 lb Tapered Roller Bearings - TS (Tapered Single)
Number of Rollers Per Row 18 Imperial
Effective Center Location 2.38 inch
K Factor 0.62
Dynamic Radial Rating - C90 184000 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 295000 lbf
NORTH CANTON, OHIO USA Static Radial Rating - C0 927000 lbf
Dynamic Radial Rating - C1 710000 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY