Professional Documents
Culture Documents
SBSS en
SBSS en
REV 04/2022
I n t h e w o r l d o f pa r t I c l e s pa m a s c o u n t s
Partikelmess- und
Analysesysteme
PAMAS SBSS
Particle counting system
Partikelmess- und
Analysesysteme
for liquids
Product features Software Versions Specifications
Customisable PAMAS PMA PAMAS SBSS
measurement settings User-friendly setting standard version with 16 or 32 freely adjustable
size channels
16 freely adjustable size of the measuring parameters accessory pump up to 5 bar LC display with keypad
channels (32 channels Report and analysis Integrated thermoprinter (optional)
PAMAS SBSS HP Data transfer:
upon request) of measuring results
with high pressure pump ASCII code, RS-232-C interface
Pressure sampling up to 10 bar Measurement report including Power supply:
up to 8 bar
Optional vacuum cycle cleanliness codes and sample 100–240 V, 50–60 Hz
for sample degassing parameters in numerical and PAMAS SBSS
Volumetric sensors
Integrated magnetic stirrer graphical presentation Small Volume Version
Use of any sample vessel LIMS integration possible with small pressure container PAMAS HCB-LD-50/50
with a max. diameter of 7 cm for small sample volumes Available size ranges:
1–200 µm (ISO 21501–3),
and a height of 18 cm 1–400 µm (ISO 21501-3)
PAMAS SBSS WG
Measuring volume option on request
for water glycol based 1–100 µm (ISO 4402)
of 1 to 1,000 ml
hydraulic fluids 4–70 µm(c) (ISO 11171)
Automatic sample flow and Max. particle concentration:
volume control via a stepper PAMAS SBSS CL 24,000 P/ml* at 25 ml/min**
motor driven syringe module for corrosive liquids
PAMAS HCB-LD-25/25
Interchangeable syringes with Available size ranges:
PAMAS SBSS Skydrol®
1 ml, 10 ml and 25 ml volume User interface of PAMAS PMA software 1–200 µm (ISO 21501–3)
for phosphate ester 1–100 µm (ISO 4402)
based hydraulic liquids 4–70 µm(c) (ISO 11171)
Accurate single particle Software Max. particle concentration:
counting technique PAMAS USP 120,000 P/ml* at 25 ml/min**
The volumetric sensor cell and Straightforward selection of PAMAS SLS-25/25
sophisticated optical compo- default measurement methods Available size ranges:
nents guarantee high resolution according to pharmacopoeias 0,5–20 µm (ISO 21501–2)
and accuracy. Every particle 1–20 µm (ISO 4402)
Easy setting of customer 1.5–25 µm(c) (ISO 11171)
passing through the sensor is specific measurement methods Max. particle concentration:
detected. This design ensures Automatic evaluation of 13,000 P/ml* at 10 ml/min**
the true measurement of the measurement results according Other sensors for larger particle sizes
fluid sample including ultra to defined criteria (pass/fail) or higher concentrations are available
clean fluids. Software fulfils requirements on request.
of 21 CFR Part 11 External pump with filter and air dryer Size
Registered trademarks are properties of their individual owners. All specifications are subject to change without notice.
Calibration Electronic assessment and 400 mm x 600 mm x 280 mm
unit for pressure and vacuum
The system is calibrated accor- approval of measurement (W x H x D)
ding to international standards results Weight
including ISO 11171, ISO 30 kg
21501-2, ISO 21501-3 or USP Reporting of
<1788>. These calibrations are * Coincidence error of 7.8 %
measurement results ** Other flow rates are available
traceable to NIST standards. according to the following on request
Historical calibrations including standards: ISO 4406, SAE
ISO 4402 are still available on AS4059, NAS 1638, GOST
request. 17216, NAVAIR 01-1A-17, GJB
420B, SAE 749D, CHARN, ISO
11218.2, USP <787>,
USP <788>, USP <789>, Ph.Eur.
2.9.19, BP XIII, JP XVI, KP X, and
IP 2.5.8 as well as raw data.
PAMAS HEAD OFFICE • Dieselstraße 10 • D-71277 Rutesheim • Phone +49 7152 99 63 0 • Fax +49 7152 99 63-32 • info@pamas.de
Find your local PAMAS branch office or representative at www.pamas.de
®