Professional Documents
Culture Documents
Beam A To Beam B - UB Option
Beam A To Beam B - UB Option
Beam A To Beam B - UB Option
25
155
Connection Details
; number of bolt rows; nbolts = 2
Notch details
; Top notch length; ctopnotch = 80 mm
Psbolts = 31.6 kN
for shear
;;
;; e1aendplate = e1endplate = 40 mm
Keendplate = 1.20
eendplate = e1endplate = 40 mm
;;;
;; Area of notched section; Anotched = dweb tsupported + Bsupported Tsupported = 2388 mm2
ybar = (dweb2 tsupported / 2 + Bsupported Tsupported (dweb + Tsupported / 2)) / Anotched = 135 mm
Project Job no.
9 Alma Road Levenshulme - Internal Modification
Calcs for Start page no./Revision
Beam A to Beam B & B1 Endplate Connections - B 4
Calcs by Calcs date Checked by Checked date Approved by Approved date
DPC 18/06/2023 DPC 18/06/2023 DPC 18/06/2023
Moment capacity of
notched section : PASS
Check 6b - local stability of notched supported beams restrained against lateral torsional buckling - 1 flange
notched
climit = 206.8 mm
Length of top notch less than limit : PASS
Check 7 - Local shear and bearing capacity of Supporting Beam web
for shear
;; etsupporting = 65 mm
Kesupporting = 1.20
Q / (2 nbolts) = 11.3 kN
SUMMARY OF RESULTS
Check 2 - Shear capacity of bolt group connecting endplate to supporting Beam
Check 5 - Capacity of the fillet welds connecting the endplate to the supported beam web
Check 6a - bending capacity of reduced supported beam section at the notch - 1 flange notched
Utilisation factor; Ucheck6amoment = 0.255; PASS
Check 6b - local stability of notched supported beams restrained against lateral torsional buckling - 1 flange
notched
Depth of top notch less than limit of D/2 : PASS
Length of top notch less than limit : PASS
Check 7 - Local shear and bearing capacity of Supporting Beam web
Shear utilisation factor; Ucheck7shear = 0.078; PASS
Bearing utilisation factor; Ucheck7bearing = 0.252; PASS