Professional Documents
Culture Documents
CS Big Project Report
CS Big Project Report
CS Big Project Report
Project instructions
Subject : Digital communication
Semester : 6th , 3rd year (19TL sec I)
Project work:
Title: A RECORDING STUDIO
Introduction:
The name of the project is Recording Studio, as the name suggests, we have
designed a system which allows the user to record a short soundtrack, play it
back, then layer on additional sounds. We have used ISD1820 that can record
sound alone using some record and play button. We required to use this
device using Arduino UNO for recording and playing voice. This uses the
basic functionality of ISD1820 for this purpose. We can extend it to use with
a extensive device to for treble, bass and tuning purposes but it isn’t currently
in our scope of project.
Hardware Requirements:
Arduino UNO 1
ISD1820 1
Speaker; 0.25W, 8 ohms 1
Jumper wires (generic) 6
Components Description:
1. Arduino UNO:
The Arduino UNO board is mostly used by hobbyist and professional alike
for prototyping and do programming in this board. It is categorized as a
microcontroller that uses the ATmega328 as a controller in it and contains 14
digital input/ output pins in which 6 are analog input pin, one power jack,
USB connector, one reset button, ICSP header, and other components. All
these components are attached in the Arduino UNO board to make it function
and can be used in the project. The board is charged by USB port or can be
directly charged by the DC supply to the board.
2. ISD1820:
ISD1820 is a small Voice Recorder and Playback module that can do the
multi-segment recording. The user can achieve a high quality of recording
(for 8 to 20secs) for each application with the adjustment of the on-board
resistor. This module use is very easy which you could direct control by
push button on board and you can easy control record, playback and repeat
and so on.