SIMPLIFIED RAMP GRADIENT FINDER
(Created by the Foundation for Promoting Personal Mobility and Ecological Transportation (Eco-Mo Foundation)
Translated by the Non-Handicapping Environment (NHE) Project
[How to make the FINDER]
}
]
| 1. Copy this page (about A4 size).
}
Attach the copy on the same size paperboard
* Make sure to align the ground connection side below with the edge of
the paperboard. (Jog)
Get prepared for the string (about
-m = 10.6 inches)
4. Make a pin hole at the O part on the upper right comer.
* Put the string through the hole and tape it up.
Attach a perforated coin (e.g., 5 centavo coin) to the other side of the
string,
Done and Ready to measure RAMP GRADIENT!
[How to measure the RAMP GRADIENT]
1. Put the ground connection side on the ramp surface.
Perceive the string location at the area of gradient criteria (1/20,
v2)
- When the string is located at the BLUE area, it complies with a criterion
of 1/20.
- When the string is located at the GREEN area, it complies with a
criterion of 1/12.
- When the string is located at the left area (left-leaning), the ramp
gradient is steeper than the criteria.
| Ground Connection Side |
Put this side on the ramp surface.