Professional Documents
Culture Documents
NAC QA 025 Rev 00 Competency Assessment Form - Format
NAC QA 025 Rev 00 Competency Assessment Form - Format
NAC QA 025 Rev 00 Competency Assessment Form - Format
00
Details of Employment:
Date From Date To Department Areas Job Type
2075-8-23 2077-10-7 EMD Line and Base
2077-10-8 2078-5-25 CAMD Reliability
Training Received
Date Name of Training Training Type Total Training Days
2019-08-1 Aviation Security 1
2019-08-27,29 Human Factor Initial 2
2019-6-4,5 CAMMOE Issue 02 Initial 2
Revision 02
2020-10-7 Aircraft Reliability Basic 1
Program
2020-10-4 CAMMOE Issue 03 Continuation 1
Revision 00
2020-12-13,14 Maintenance Program Basic 2
2021-02-5 Safety Management Initial 1
System Training
2021-02-8 to 12 Airbus A320 General Familiarization 5
2021-02-1 to 3 DHC-6/300 General Familiarization 3
2021-02-24 to 26 NACR PART M 3
2021-02-15 to 16 Fuel tank safety Initial 2
ASSESSMENT POINTS (To be assessed as per attached Matrix)
Areas Satisfactory Unsatisfactory
Subject Knowledge
Skills/Standard of Performance
Attitude
Results (Tick the appropriate) Pass Fail
Assessed By:
Name Designation Signature Date
Page 1 of 4
Form No. NAC/QA/025 Rev. 00
Assessment subject:
Mechanics/Technicians
Specialized Service
Store In-charge
Maintenance
Support Staff
Record Staff
Supervisors
Instructors
Managers
Staff
Staff
Knowledge of applicable officially recognized
standards
Knowledge of auditing techniques: Planning,
conducting and reporting
Knowledge of human factors, human
performance and limitation
Knowledge of logistics processes
Knowledge of organization capabilities, privileges
and limitations
Knowledge of NCAR Part-M, Part-145, and any
other relevant regulations
Knowledge of relevant parts of the organization
exposition and procedures
Knowledge of occurrence reporting system and
understanding of the importance of reporting
occurrences, incorrect maintenance data and
existing or potential defects
Knowledge of safety risks linked to the working
environment
Knowledge on CDCCL when relevant
Knowledge on EWIS when relevant
Understanding of professional integrity, behavior
and attitude towards safety
Understanding of conditions for ensuring
continuing airworthiness of aircraft &
components
Understanding of his/her own human
performance and limitations
Understanding of personnel authorizations and
limitations
Understanding critical task
Ability to compile and control completed work
cards
Ability to consider human performance and
limitations.
Page 2 of 4
Form No. NAC/QA/025 Rev. 00
Mechanics/Technicians
Specialized Service
Maintenance
Support Staff
Record Staff
Supervisors
Instructors
Managers
Staff
Staff
Ability to prioritize tasks and report discrepancies
Ability to process the work requested by the
operator
Ability to promote the safety and quality policy
Ability to properly process removed, uninstalled
and rejected parts
Ability to properly record and sign for work
accomplished
Ability to recognize the acceptability of parts to
be installed prior to fitment
Ability to split complex maintenance tasks into
clear stages
Ability to understand work orders, work cards
and refer to and use applicable maintenance
data
Ability to use information systems
Ability to use, control and be familiar with
required tooling and/or equipment
Adequate communication and literacy skills
Analytical and proven auditing skills (for example,
objectivity, fairness, open‐mindedness,
determination, …)
Maintenance error investigation skills
Resources management and production planning
skills
Teamwork, decision‐making and leadership skills
Knowledge of Maintenance Program
Development and effective implementation
Knowledge of AD/SB evaluation technique
Knowledge of Reliability Monitoring
Knowledge of Work Package Generation process
Knowledge of Instruction Techniques
Ability to present the subject knowledge and skill
effectively
Knowledge of Dangerous Goods
Knowledge of Component & Material acceptance
procedure
Knowledge of identification and reporting of
bogus parts
Page 3 of 4
Form No. NAC/QA/025 Rev. 00
Page 4 of 4