Professional Documents
Culture Documents
8655 Manual Rev2.21
8655 Manual Rev2.21
8655 Manual Rev2.21
User Manual
Version 1.0
www.efcotec.com
EGL 8655 Gaming Logic System User Manual
Revision History
Revision Date Description
1.0 04-01-2021 First release
www.efcotec.com
i
EGL 8655 Gaming Logic System User Manual
Copyright Notice
This document copyrighted ©2021. All rights reserved. The original manufacturer reserves the right
to make improvements to the products described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any
means without the prior written permission of the original manufacturer. Information provided in this
manual is intended to be accurate and reliable. However, the original manufacturer assumes no
responsibility for its use, or for any infringements upon the rights of third parties that may result from
its use.
The material in this document is for product information only and is subject to change without notice.
While reasonable efforts have been made in the creation of this document to assure its accuracy,
EFCO assumes no liability resulting from the errors or omission in this docuement, or from the use of
the information contained herein.
Acknowledgement
All other product names, or trademarks are the property of their respective owners.
IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines Corporation.
Packing List
Before setting up your product, please ensure the following items have been included in the box:
• 1 - EGL-8655
• 2 - Lock Keys
If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
www.efcotec.com
ii
EGL 8655 Gaming Logic System User Manual
Safety Instructions
Please read the following safety instructions carefully. It is advised that you keep
this manual for future reference.
1. Make sure the power source matches the power rating of the device.
2. Always completely disconnect the power prior to working on the system’s hardware.
3. No connections should be made when the system is powered on as a sudden rush of power may
damage sensitive electronic components.
4. If the device will not be used for a long period of time, disconnect it from the power supply to
avoid damage by transient over-voltage.
5. Always disconnect this device from any AC supply before cleaning.
6. While cleaning, use a damp cloth instead of liquid or spray detergents.
7. Make sure the device is installed near a power outlet and is easily accessible.
8. Keep this device away from humidity.
9. Place the device on a solid surface during installation to prevent a fall.
10. Do Not cover the openings on the device to ensure optimal heat dissipation.
11. Do Not touch the heat sink or heat spreader when the system is running.
12. Never pour any liquid into the openings. This could cause fire or electrical shock.
13. As most electronic components are sensitive to static electrical charge, be sure to ground
yourself to prevent static charge when installing the internal components. Use a grounding wrist
strap and keep all electronic components in static sheilded containers.
14. If any of the following situations arise, please contact our service personnel:
• Liquid intrusion to the device.
• Exposure to moisture.
• Device is not working as expected or in a manner as described in this manual.
• The device is dropped or damaged.
• Any obvious signs of damage displayed on the device.
15. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WHERE THE
STORAGE TEMPERATURE IS BELOW -15°C (5°F) OR ABOVE 85°C (185°F) TO PREVENT
DAMAGE.
www.efcotec.com
iii
EGL 8655 Gaming Logic System User Manual
Table of Contents
Chapter 1…................................................................................................... 01
Product Specifications……......................................................................... 02
Chapter 2…................................................................................................... 04
I/O on Front Panel….................................................................................. 05
2.1 Display Interface….......................................................................... 05
2.2 USB Ports….................................................................................... 05
2.3 LAN Ports….................................................................................... 06
2.4 Serial Ports….................................................................................. 06
2.5 Audio Jack…................................................................................... 09
Chapter 3…................................................................................................... 10
I/O on Rear Panel …................................................................................. 11
3.1 I/O Type Descriptions…................................................................... 11
3.2 72-Pin JAMMA Connector…............................................................. 11
3.3 20-Pin DC Input Connector…............................................................ 12
3.4 SPI Connector Right Side…............................................................. 12
Chapter 4…................................................................................................... 13
GPIO Hardware Atributes…....................................................................... 14
4.1 O-OD (Open Drain Output)…........................................................... 14
4.2 I-ISO (GPI- Isolated Input)…............................................................ 14
4.3 Intrusion…....................................................................................... 15
4.4 Auxillary Power Monitor…................................................................ 15
Chapter 5…................................................................................................... 16
Electrical Characteristics…........................................................................ 17
Chapter 6…................................................................................................... 18
Chassis and Dimensions…......................................................................... 19
6.1 Top Side…...................................................................................... 19
6.2 Front Side….................................................................................... 19
6.3 Rear Side….................................................................................... 19
6.4 Left Side…...................................................................................... 20
6.5 Right Side….................................................................................... 20
www.efcotec.com
iv
EGL 8655 Gaming Logic System User Manual
Chapter 1
www.efcotec.com
1
EGL 8655 Gaming Logic System User Manual
Specifications
Item Description
AMD Ryzen™ R1606G (2 Core, 4 Threads, 2.6GHz, Boost to 3.5GHz, L2=2MB, L3=4MB,
Embedded TPD=12-25W
R1000 series R1505G (2 Core, 4 Threads, 2.4GHz, Boost to 3.3GHz, L2= 1MB, L3=4MB, TDP =12-
processor 25W)
2x DDR4 SO-DIMM sockets, maximum to 16GB each socket, for a total of 32GB
Main Memory
Supports DDR4-2400
Integrated: R1606G: Radeon™ Vega3, Maximum 1200MHz
AMD
Radeon™ R1505G: Radeon™ Vega3, Maximum 1000MHz
series
graphics Expansion: 1x PCIe 3.0 x16 slot
Display 3x DP
2x RJ45 LAN port (10/100M/1000M bps)
Ethernet 2x REALTEK RTL8111G controller
PXE support
1x M.2 SATAIII SSD connector
Storage 1x M.2 2280 PCIe 3.0 x4
2x USB 3.0 port on RJ45 dual USB integrated connector
2x USB 2.0 port on RJ45 dual USB integrated connector
USB
2x USB 2.0 port on front panel
2x Internal USB 2.0 port
6x RS232
COM1, COM2,COM4, & COM5 support 5V/12V/RI selectable (pin#9),
current limit 1A
Serial Ports
COM3 could be adapted to TTL
COM5 could be adapted to RS422 or RS485
COM6 could be adapted to ccTalk
1x 5.1 channel to 3.5ϕ audio jacks
Audio
15W Stereo Class-D audio power amplifier output to JAMMA connector
1x Li-Ion Battery CR2032* 3V for system RTC
1x Rechargeable Ni-MH Battery** 3.6V for SRAM and EIT controller
Application
Backup Battery SRAM data maintenance
Intrusion logger
Secure RTC
* Li-Ion Battery CR2032 – battery life is over 5 years without system power supply
** Ni-MH Battery – battery life is over 120 days without system power supply
Controller: BPC3800-E-B256
ESD protection (contact-4KV, air-8KV) for all connectors and headers
25-bit opto-isolated digital input
Gaming I/O Hub Operation voltage range: -0.8V - +24V
27-bit high sink current output
Open-Drain Topology
Maximum to 3A sink current
www.efcotec.com
2
EGL 8655 Gaming Logic System User Manual
Specifications - continued -
Item Description
Controller: EIT020EN
Secure RTC,
7x Intrusion detection
Auxiliary Gaming
5x I/O pins
Controller
1x Power on / off
1x Case open detection
Battery charger and gauge
Designed for intrusion logger and system time stamp
Secure RTC
Supports RTC time from 2000/1/1 – 2068/6/8
Rechargeable battery keeps data over 120 days
ESD Protection
Intrusion Logger TTL level 3V pulled up input
5x I/O pins
1x Case open detection
SRAM with backup battery supply
NVRAM SRAM works over 120 days
SRAM capacity: default is 3MB, with a maximum of 16MB
www.efcotec.com
3
EGL 8655 Gaming Logic System User Manual
Chapter 2
www.efcotec.com
4
EGL 8655 Gaming Logic System User Manual
www.efcotec.com
5
EGL 8655 Gaming Logic System User Manual
I/O on Front Pannel
LED A LED B
Status
(Link/Activity) (Speed)
No Link Off Off
Link Solid Yellow Off
LAN2 LAN1 10Mbps
Activity Blinking Yellow Off
Link Solid Yellow Solid Green
100Mbps
Activity Blinking Yellow Solid Green
Link Solid Yellow Solid Orange
1Gbps
Activity Blinking Yellow Solid Orange
www.efcotec.com
6
EGL 8655 Gaming Logic System User Manual
I/O on Front Pannel - continued -
2.4 Serial ports
COM1, COM2, and COM4 pin #9 is 5V / 12V / RI selectable by the jumper setting
on JSETCOM1, JSETCOM2, AND JSETCOM4.
COM5 & COM6 are 2x5 pin, 2.54mm pitch pin headers (wired to front panel).
www.efcotec.com
7
EGL 8655 Gaming Logic System User Manual
I/O on Front Pannel - continued -
COM5 could be adapted to RS422 / RS485 by the jumper settings on
JSETCOM5_SEL1 and JSETCOM5_SEL2.
COM5 Settings
JSETCOM5_SEL1 JSETCOM5_SEL2 Description
Jumper on 1-2 Jumper on 1-2 RS485 Half Driver Duplex
Jumper on 1-2 Jumper on 2-3 RS485 Half Receiver Duplex
Jumper on 2-3 Jumper on 2-3 RS422 mode
Jumper on 2-3 Jumper on 1-2 RS232 mode (Default)
www.efcotec.com
8
EGL 8655 Gaming Logic System User Manual
I/O on Front Pannel - continued -
COM6 could be adapted to ccTalk by JSETCOM6.
Header_2x3P_P2.0_M_180/S
RS232
ccTalk
(Default)
1 1
3 3
5 5
www.efcotec.com
9
EGL 8655 Gaming Logic System User Manual
Chapter 3
www.efcotec.com
10
EGL 8655 Gaming Logic System User Manual
I/O on Rear Panel
3.1 I/O Type description
Type Description
I-TTL TTL voltage level input
I-CMOS33 CMOS 3.3V voltage level input
O-CMOS33 CMOS 3.3V voltage level output
B-CCTALK Bidirectional ccTalk type I/O
I-ISO Isolation protected input
O-OD Open-Drain output
O-AA Amplifier audio output signal
P Power or Ground
www.efcotec.com
11
EGL 8655 Gaming Logic System User Manual
I/O on Rear Panel - continued -
3.3 20-pin DC input connector
Pin 1
Pin # Description
1 +12V
2 SPI_CLK
3 SPI_MOSI
4 GND
www.efcotec.com
12
EGL 8655 Gaming Logic System User Manual
Chapter 4
www.efcotec.com
13
EGL 8655 Gaming Logic System User Manual
GPIO Hardware Attributes
In general, the gaming devices such as Meter, Hopper, Coin accepter, Bill accepter and
Key lock are controlled by GPIO. This helps the user focus on APP program development.
Below is the description of hardware behaviors.
www.efcotec.com
14
EGL 8655 Gaming Logic System User Manual
GPIO Hardware Attributes - continued -
4.3 Intrusion
Provides power to the unit from either the system or auxiliary power port. The
intrusion detection is controlled by the EIT controller. When the system power is
turned on the EIT operates via the system power. Once the system power is turned
off, the EIT power source will switch to the auxiliary power which is provided by a
backup battery and the EIT will continue to operate.
Intrusion Event
If there is any edge change on the detectioin pins, the EIT will record the event. The
record includes the event status (0.1.0.1...) and time (year, month, date, hour, minute,
and second). Each intrusion pin will keep the last 4 recorded events.
www.efcotec.com
15
EGL 8655 Gaming Logic System User Manual
Chapter 5
www.efcotec.com
16
EGL 8655 Gaming Logic System User Manual
Electrical Characteristics
Electrical Characteristics
Value
Symbol Description Unit
Min Type Max
V_I-ISO_H Isolation Input logic high voltage 4.5 -- 48 V
V_I-ISO_L Isolation input logic low voltage -9.5 -- 1.5 V
I_ISO_L Isolation Input logic low current. 5 20 50 mA
V_O-OD_PH Open Drain pull-high Voltage -- -- 30 V
I_O-OD Open Drain Sink current -- 1 mA
V_I-CMOS33_H 3.3V CMOS input logic high voltage 2.0 3.6 V
V_I-CMOS33_L 3.3V CMOS input logic low voltage -0.3 0.8 V
I_O-CMOS33_L 3.3V CMOS Output logic low current 12 mA
I_O-CMOS33_H 3.3V CMOS Output logic high current -12 mA
5V Power Output voltage 4.5 5 V
12V Power Input voltage 10.8 12 13.2 V
I_12V Power Input current (USB devices not included) -- -- 3 A
www.efcotec.com
17
EGL 8655 Gaming Logic System User Manual
Chapter 6
www.efcotec.com
18
EGL 8655 Gaming Logic System User Manual
Chassis and Dimension
6.1 Top Side
www.efcotec.com
19
EGL 8655 Gaming Logic System User Manual
Chassis and Dimension - continued
6.4 Left Side
End of Document
www.efcotec.com
20