Professional Documents
Culture Documents
t200 - t680 Replace Power Button
t200 - t680 Replace Power Button
SpectraLogic.com
Copyright Copyright © 2013‐2015 Spectra Logic Corporation. All rights reserved. This item and the
information contained herein are the property of Spectra Logic Corporation.
Notices Except as expressly stated herein, Spectra Logic Corporation makes its products and
associated documentation on an “AS IS” BASIS, WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, BOTH OF WHICH ARE EXPRESSLY DISCLAIMED. In no
event shall Spectra Logic be liable for any loss of profits, loss of business, loss of use or
data, interruption of business, or for indirect, special, incidental or consequential
damages of any kind, even if Spectra Logic has been advised of the possibility of such
damages arising from any defect or error.
Information furnished in this manual is believed to be accurate and reliable. However, no
responsibility is assumed by Spectra Logic for its use. Due to continuing research and
development, Spectra Logic may revise this publication from time to time without notice,
and reserves the right to change any product specification at any time without notice.
Trademarks BlueScale, CC, Spectra, SpectraGuard, Spectra Logic, TeraPack, and TranScale are
registered trademarks of Spectra Logic Corporation. ArchiveGrade, BlackPearl,
IntraCloud, nTier Verde, and Verde are trademarks of Spectra Logic Corporation. All
rights reserved worldwide. All other trademarks and registered trademarks are the
property of their respective owners.
Revision
History Revision Date Description
A July 2013 Initial release
B March 2015 Trademark update.
Contacting
Spectra Logic
To Obtain General Information
Spectra Logic Corporation Spectra Logic Europe Ltd.
Phone: 1.800.833.1132 or 1.303.449.6400 Phone: 44 (0) 870.112.2150
International: 1.303.449.6400 Fax: 44 (0) 870.112.2175
Fax: 1.303.939.8844
Mexico, Central and South America, Asia, Australia, and New Zealand
Phone: 1.303.449.0160
To Obtain Documentation
2
March 2015 Power Button Replacement—Spectra T200, T380, and T680 Libraries
T200, T380, or T680 Library
Power Button Replacement
This guide provides instructions for replacing a power button in the T200,
T380, or T680 library (referred to in these instructions as “the library”).
3
T200, T380, or T680 Library Power Button Replacement Prepare for Maintenance
4
March 2015 Power Button Replacement—Spectra T200, T380, and T680 Libraries
T200, T380, or T680 Library Power Button Replacement Prepare for Maintenance
5
March 2015 Power Button Replacement—Spectra T200, T380, and T680 Libraries
T200, T380, or T680 Library Power Button Replacement Replace the Power Button
A
Pull outward
Tab
Lift upward
B
2. Lift the cover upward to disengage the tabs on each side of the cover
from the slots in the front of the library.
3. Remove the cover and set it aside.
4. Using your fingers or a #2 Phillips screwdriver, loosen, but do not
remove, the two knurled screws securing the bottom of the library front
panel to the chassis.
Knurled
screws
6
March 2015 Power Button Replacement—Spectra T200, T380, and T680 Libraries
T200, T380, or T680 Library Power Button Replacement Replace the Power Button
5. Lift the front panel outward and away from the chassis to disengage the
two nuts on the back of the front panel from the holes on either side of
the chassis. Set the cover aside.
Alignment nut on
front panel
7
March 2015 Power Button Replacement—Spectra T200, T380, and T680 Libraries
T200, T380, or T680 Library Power Button Replacement Replace the Power Button
3. Using a #2 Phillips screwdriver, remove the four screws that secure the
power button to the power button mounting bracket.
The new power button FRU does not include these screws, so save
them to be reinstalled later.
4. Remove the defective power button and dispose of it according to your
company’s environmental guidelines.
5. Using a #2 Phillips screwdriver and the four screws removed in Step 3,
attach the new power button to its mounting bracket.
Make sure the connector is oriented in the same direction as the arm of
the mounting bracket.
Power button
connector Install (4) screws
Mounting Bracket
Arm
8
March 2015 Power Button Replacement—Spectra T200, T380, and T680 Libraries
T200, T380, or T680 Library Power Button Replacement Replace the Power Button
6. Using a #2 Phillips screwdriver and the screw removed in Step 2, attach
the power button mounting bracket to the bottom of the LCD frame.
Figure 9 Reinstall the screw, and then connect the power button cable.
7. Route the power button cable through the space between the power
button and its mounting bracket.
Connect the power button cable to the power button assembly.
9
March 2015 Power Button Replacement—Spectra T200, T380, and T680 Libraries
T200, T380, or T680 Library Power Button Replacement Complete the Replacement
Alignment nut on
front panel
10
March 2015 Power Button Replacement—Spectra T200, T380, and T680 Libraries
T200, T380, or T680 Library Power Button Replacement Complete the Replacement
2. Using your fingers or a #2 Phillips screwdriver, tighten the two knurled
screws on the bottom of the library front cover to secure it to the
chassis.
Knurled
screws
3. Position the tabs on the back of the filter cover over the slots in the front
cover.
4. Make sure that the air filter is positioned on the inside of the filter
cover.
5. Install the filter cover.
a. Engage the tabs with the slots in the front of the library, then slide
the cover downward.
b. Push the upper edge of the cover toward the front panel until the
magnets secure it to the front panel.
Push inward
Tab
A
Slide downward
11
March 2015 Power Button Replacement—Spectra T200, T380, and T680 Libraries
T200, T380, or T680 Library Power Button Replacement Resume Library Operations
12
March 2015 Power Button Replacement—Spectra T200, T380, and T680 Libraries