Professional Documents
Culture Documents
FHFB (1900)
FHFB (1900)
LTE Radio Access, Rel. FDD-LTE 17A, Operating Documentation, Pre-release, Issue 01 (HTML) [2017-04-25 16:24
GMT+2] > LTE BTS and OMS Descriptions > Flexi Multiradio BTS RF Module and Remote Radio Head Description
> Descriptions of RRHs Rel. 4.0
Property Value
MIMO 4TX
Interfaces
FHFB interfaces
Place the cursor over the table or module for more information.
http://10.133.137.78/LTE 1/6
7/8/2017 Flexi RRH 4-pipe 1900 160 W (FHFB)
Power 60 W
http://10.133.137.78/LTE 2/6
7/8/2017 Flexi RRH 4-pipe 1900 160 W (FHFB)
Electrical specifications
Table: FHFB electrical specifications
Property Value
-57.0 V DC to -60.0 V DC
Power consumption
Table: FHFB power consumption
Mode Configuration Output power per Estimated power consumption [W] at 48VDC input at 25°C. Non-committed estimated values
carrier [W] depend on the final product HW and SW optimization with +/- 10% margin. Average = (6h low
hour load, 10h medium hour load and 8h busy hour load) / 24h
http://10.133.137.78/LTE 3/6
7/8/2017 Flexi RRH 4-pipe 1900 160 W (FHFB)
Mode Configuration Output power per Estimated power consumption [W] at 48VDC input at 25°C. Non-committed estimated values
carrier [W] depend on the final product HW and SW optimization with +/- 10% margin. Average = (6h low
hour load, 10h medium hour load and 8h busy hour load) / 24h
0.7 0.8
Property Value
Installation options
pole/wall installation
IP rating IP65
Height Core RRH: 583 mm (23.0 in) With plastic cover and mounting brackets
With upper and lower mounting brackets: 888 mm (35.0 in)
http://10.133.137.78/LTE 4/6
7/8/2017 Flexi RRH 4-pipe 1900 160 W (FHFB)
With FMFB and strain relief
Property Value Dimensions orientation
Environmental specifications
Table: FHFB environmental specifications
Property Value
Maximum operational outdoor temperature in the shade, assuming wind speed is 3 m/s (at +55°C (131°F)
constant high ambient temperature, maximum output power might be limited)
Maximum operational outdoor temperature in the sun, assuming wind speed is 3 m/s (at constant +50°C (122°F)
high ambient temperature, maximum output power might be limited)
Maximum indoor temperature, assuming wind speed is 0 m/s, valid for fanless products (at +45°C (113°F)
constant high ambient temperature, maximum output power might be limited)
LEDs
Table: FHFB LEDs
Red, stable Critical alarm affecting the whole RF module or all antenna carriers Fault
Stable Red for less than 5 seconds and changes to Switched ON, but the next conditions are not reached yet No alarm
Stable Yellow
Stable Red for less than 5 seconds The module is in the process of resetting No alarm
Periodic Red and Green Antenna line faulty/degraded due to external factors (for example, VSWR Alarm
minor/major values exceeded, Antenna line device faulty/degraded)
http://10.133.137.78/LTE 5/6
7/8/2017 Flexi RRH 4-pipe 1900 160 W (FHFB)
Blinking Colors (Red, Yellow, and Green), each color Module highlighting (Flexi BTS SM functionality that can help identifying No alarm
stable for 0.5 second faulty module)
Note: The minimum startup voltage is 40.5 V DC. If the input voltage is below/beyond extended limits, unit might shut down.
Related resources
http://10.133.137.78/LTE 6/6