Professional Documents
Culture Documents
BA TIN-Profibus DP Schnittstelle-Vistus-en E 20180920 AKa
BA TIN-Profibus DP Schnittstelle-Vistus-en E 20180920 AKa
Table of Contents
1. General Information.............................................................................................................. 2
1.1 Setting the Profibus DP Address ............................................................................ 3
1.2 Parameterizing the Profibus DP Master (PLC) ................................................... 3
2. Input Data (PLC Reads from Metal Detector) ............................................................... 4
3. Output Data (PLC Writes to Metal Detector) ................................................................ 5
4. Description of Functions ...................................................................................................... 6
4.1 Change of Product Types .......................................................................................... 6
4.2 Data Channel ................................................................................................................ 6
5. Connecting diagram .............................................................................................................. 7
6. Service ....................................................................................................................................... 8
7. Ordering Information............................................................................................................ 9
Minebea Intec Aachen GmbH & Co. KG Am Gut Wolf 11 D-52070 Aachen Tel:+49.241.18270 Fax +49.241.1827.210 www.minebea-intec.com
General Information
1. General Information
The Profibus DP interface for the Vistus metal detector consists of eight bytes for in-
put and eight for output.
A DP interface must be set up for each line. When systems have one control unit and
multiple lines (max. 4), one DP slave is provided for each line.
The Profibus upgrade consists of an optional expansion PCB, which needs to be in-
stalled on the IO-CPU module of the line in question.
After the expansion PCB has been installed, the corresponding Profibus option needs
to be activated on the operator terminal of the metal detector. The dialog to activate
the Profibus option is located on the third page of the system settings.
2
General Information
Settings for the slave address can be made in the 1-127 range. The default value is 1
for the first line, 2 for the second, 3 for the third, and 4 for the fourth.
If the Profibus has been activated for a line in the system, a check takes place when
starting up the system to determine whether the relevant Profibus hardware is pre-
sent. If this is not detected, a warning (code W0080) is generated.
Slave address: in line with rotary encoder switch (default address "3")
I/O modules: 8 input/output bytes (selectable in GSD file)
Baud rate: automatic detection up to 12 Mbaud
Sync: supported
Freeze: supported
ID no.: 0x7FFF
3
Input Data (PLC Reads from Metal Detector)
4
Output Data (PLC Writes to Metal Detector)
5
Description of Functions
4. Description of Functions
4.1 Change of Product Types
Produktsor tennu mmer vorgeb en
Specify product type number OB2
AB 2
Sor tenwechsel OK
Type change OK I0.6
E 0.6
In the event of an error during the type change (e.g., type not defined), the "Sort
change is running" signal is deactivated after two seconds; the OK signal is not set!
Daten
Read dataDatenkanal lesen
channel data O0.6
A 0.6
Daten
Data Datenkanal
channel gültig
data valid I0.5
E 0.5
Data Daten
channelDatenkanal
data IB4 to IB7
EB4 bis EB7 Daten
Data
6
Connecting diagram
m
5. Conn
necting diagram
7
Service
6. Service
Europe (West)
Germany +49.241.1827.111
Am Gut Wolf 11 technical.support.ac@minebea-intec.com
52070 Aachen Spare parts:
+49.241.1827.219
spareparts.ac@minebea-intec.com
Belgium, Netherlands Belgium: +32.2.756.0673
Z.3 Doornveld 33 Netherlands: +31.30.602.50.40
1731 Zellik service.be@minebea-intec.com
service.nl@minebea-intec.com
Switzerland +41.44.746.50.00
Moosmattstrasse 36 mechatronics.switzerland@minebea-intec.com
8953 Dietikon
United Kingdom +44.121.779.3131
2670 Kings Court, The Crescent service.uk@minebea-intec.com
Birmingham Business Park
B37 7YE Birmingham
France +33.1.48.63.20.46
283 Avenue du bois de la Pie service.client@minebea-intec.com
ZI Paris Nord II
95941 Roissy CDG Cedex
Spain, Portugal +34.915.9994.45
C/ Musgo, 2 Edificio Europa II Soporte.iberia@minebea-intec.com
28023 Madrid
Italy +39.0362.361.405
Via Alcide De Gasperi, 202 support.italy@minebea-intec.com
0834 Nova Milanese (MB)
Europe (East)
Poland +48.61.656.02.98
ul. Wrzesinska 70 biuro.pl@minebea-intec.com
62-025 Kostrzy serwis.pl@minebea-intec.com
Russia +7 981 696-36-02
Kievskaya Street 6 service.russia@minebea-intec.com
196084 Saint Petersburg
North/Middle America
8
Ordering Information
7. Ordering Information
http://www.minebea-intec.com
Sales
Phone +49 (0)241.1827.101
Fax +49 (0)241.1827.210
sales.ac@minebea-intec.com