EP Edge of concrete or Outlet marker
composite paved shoulder 25x25mm. gal.
1 ‘steel bar
2.2m long
Pavernent. Sore mn
100mm or 150mm diameter
smooth inside wall outlet pipe
50mm min pipe bedding
Open graded
drainage layer = 300K min
sitet pipe oetep
See OuRIE Pipe 2.5m outlet with coomm-| | Yt. SINGLE OUTLET PIPE
Runout Detail” ronch Detale” Fodent gate $00 mn: somm TRENCH DETAIL
SUBDRAIN OUTLET PIPE DETAIL — pavement
surface 300mm rin Geotextile
overop Geetes
Subdroin and outlet
eee =e Embedment material Note 1
Non-perforated r * 100mm or 150mm diameter
Shee ie wore X\ sro nade ahi
Curved pipe Outlet pipe —“F catch ,
fittings or Granular, Note 3 ‘s basin
4 cow :
connections encatvink grout in wal Lil |-150|—200—[-150-] L some min pire bedding
OPresisting Aiveture "oe 200
outlet ie structur
Sate pipe he suctare
OUTLET PIPE RUNOUT DETAIL OUTLET PIPE CONNECTION OE Pe
NOTES: TO CATCH BASIN DETAIL
1 Embedment material shall be open graded drainage layer aggregate. LEGEND:
2 Outlet pipe trench embedment material shall be wrapped with geotextile. .
3 For catch basin connections, outlet pipe trenches backfilled with granular EA] Open graded drainage layer
do not require geotextile wrap. 9 Granular
4 Install outlet pipe flush with inside face of catch basin. [Al Concrete pavement
A This standard to be read in
conjunction with OPSD 207.041
B Use compatible manufactured
fittings for all connectors and
couplings.
C All dimensions are in millimetres
unless otherwise shown.
ONTARIO PROVINCIAL STANDARD.
SUBDRAIN PIPE
CONNECTION AND OUTLET
OPEN GRADED DRAINAGE LAYER
DRAWING Nov 2016
OPSD 207.044