Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

POWER GEN

BOOSTER TECHNOLOGY
POWER GEN® HYDROSOL
● *POWER GEN®: 2 SUBSYSTEMS

● 1) BOOSTER GEN HYDROSOL ®

● -BOOSTER HYDROSOL®
● →INSTALLED IN→
● 4T OHV “GENSET” GENERATOR

● 2) (A.I.) POWER®
● -A.I. CONTROL BOX® + CPZS ACCUMULATORS OF GREAT CAPACITY.
Generation substation &
Smart Backup
(Versatile transient energy self-sufficiency, at a low cost )
The POWER GEN® system is a mini energy generation provided with the BOOSTER HYDROSOL
SYSTEM® added to a compact and soundproof modular generator (GEN Set) ⇒
BOOSTER GEN HYDROSOL®, which uses a smart accumulation system and an energy efficiency
manager (A.I. POWER HYDROSOL®), with which it is possible to supply the necessary electricity
in both heavy industry and at home.

Access to the energy needed on demand and obtain a balance of self-generation and efficient
self-consumption thanks to an intelligent electronic programmed system (A.I. CONTROL BOX®
by A.I. POWER HYDROSOL®).Acceso a la energía necesaria bajo demanda y obtiene

Possibility of extension of independent modules with a minimum cost of installation,


operation and a compact, safe and efficient storage.

High profitability of the system; amortization before 5 years guaranteed.


Self-sufficiency of energy supply, possibility of independence of the
general network of electrical service.

Up to 90% of original fuel savings.

It works with water from any source.

Product of transition towards a sustainable


energy model.

Minor maintenance needs.

Low cost of production, retail price and


replacement of important elements.

Toxic emissions that tend to


0%.
HOW IT WORKS?
HYDROSOL BOOSTER GEN®:
The main process is a cracking system of a mixture of original fuel and water in higher proportion
(from the tap, contaminated, surplus waste oils of any type) that feeds a generator, which
supplies the energy on demand.

This process is based on a particular magnetothermal effect that modifies the molecular
structure of the mixture, remodelling its qualities and increasing its efficiency. This is used to
power an internal combustion engine of a compact, soundproof and modular inverter generator.

A.I. POWER HYDROSOL®:


This system accumulates energy in a battery bank managed efficiently and intelligently by the
multi-sensor adaptive electronic control system (AI CONTROL BOX®), forming the smart backup
sub-unit, providing electric power in the maximum amount requested, being available in any
moment depending on the energy demand and consumption patterns in the customer's
installation.
System process
1)Internal combustion engine with built-in Hydrosol booster system, provides the mechanical
energy to transform.

2)The alternator collects the mechanical energy of the internal combustion engine,
transforming it into electric, to provide service and power to the energy storage system.

3) Electrical/electronic control system


and comprehensive management of the
substation, which is equipped with a
simple interface of energy management,
to facilitate its optimization and control.

4) Intelligent accumulation management


system, with long life batteries designed
to operate in continuous deep cycles.
BENEFITS:
- SELF-GENERATION OF ELECTRICITY AT LOW OPERATION COST.

- POSSIBILITY OF INDEPENDENCE FROM THE NETWORK AND FROM CLIMATOLOGICAL


LIMITING FACTORS IN THE USE OF RENEWABLE ENERGIES.

- VERY LOW POLLUTANT EMISSIONS LEVELS.

- POSSIBILITY TO USE OIL WASTE AND OTHER WASTE SUBSTANCES AS PART OF


ALTERNATIVE FUEL.

- LONG DURABILITY OF THE SYSTEM, MODULAR AND SCALABLE UP TO NEEDS OF


POWER AND ENERGY MANAGEMENT.

-HIGH PROFITABILITY OF THE SYSTEM IN NORMAL OPERATING CONDITIONS: QUICK


AMORTIZATION.

-POSSIBILITY OF IMPLEMENTATION IN MOST CASES .


POWER GEN Hydrosol Technical datasheet
Input Voltage (V), frequency AC 220-480 V±10%, 50/60HZ
Original fuel consumption (%) 45%-5%
Power Rating(KWh) 1-1000
Original fuel savings(GAS), (% ) 55%-95%
Original HC consumption 0.2 l/h→6 l/h
Max. Relative Humidity(%) ≤90%
Max. Water Consumption (L/h) 1
Work Mode Continuous / schedule
Isolation degree F
Protection degree IP65
Refrigeration air/water refrigeration
Water requirement Water from any source
Size - L*W*H (mm) Variable
Net weigh (Kg) Variable
Applicability to engines from 106 CC to 15000 CC*
info@hydro-sol.es
manuel.duarte@hydro-sol.es

www.hydro-sol.es

(+34) 640106693
MAKE IT
DIFFERENT
Hydrosol Soluciones Energéticas S.L. (Sevilla) ESPAÑA
C.I.F: B-90221136

You might also like