Professional Documents
Culture Documents
Classification of Aggregates
Classification of Aggregates
Classification of Aggregates
The variability in density can be used to produce concrete of widely different unit weights, see Table (1). The most common classification of aggregates on the basis of bulk specific gravity is lightweight, normal-weight, and heavyweight aggregates. This section specifically address the different characteristics found in both lightweight and heavyweight aggregates.
Table (1), Density Classification of Concrete Aggregates, Mindess Category Unit Weight of Dryrodded Aggregate (kg/m3) Unit Weight of Concrete (kg/m3) 300-1100 1100-1600 1450-1900 2100-2550 2900-6100 Typical Concrete Strengths (MPa) <7 7-14 17-35 20-40 20-40 Typical Applications
Lightweight aggregates: As mentioned in the body of this paper, lightweight concrete contains aggregate that is natural or synthetic which weighs less than 1100 kg/m3. The lightweight is due to the cellular or high internal porous microstructure, which gives this type of aggregate a low bulk specific gravity. The most important aspect of lightweight aggregate is the porosity. They have high absorption values, which requires a modified approach to concrete proportioning. For instance, slump loss in lightweight concrete due to absorption can be an acute problem, which can be alleviated by prewetting (but not saturating) the aggregate before batching. Lightweight aggregates are covered in ASTM C330 (for structural concrete), C331 (for masonry units), and C332 (for insulating concrete). Additionally, these specifications all contain the requirement that aggregates should be composed of predominately lightweight-cellular and granular inorganic material. Expanded clay, shale and slate are the most common materials found in lightweight aggregate used in structural concrete. Properties of concretes made with lightweight aggregate are listed in Table (2).
Table (2) Properties of concretes made with lightweight aggregate, Mindess Aggregate Aggregate Origina Concrete 28-Day Absorption
Dry Unit Weight (kg/m3) Expanded shale, Clay, slate Foamed slag Sintered fly ash Exfoliated Vermiculite Expanded perlite Pumice 750 Expanded glass Expanded polystrene beads Brick rubble Crushed stoneb
a PN,
Compressive Strength (MPa) 14-42 14-42 14-42 0.67-3 0.6-3.5 4-5 9 0.7-12.5 7.7-21 21-50
(Wt %)
550-1050
PN
S S PN PN N S S S N
110-1850 110-1850 1350-1900 400-950 550-800 800-1300 1200 300-900 1750-1900 2250-2400
1450-1750
processed natural material; N, natural material; S, synthetic material b Natural aggregate listed for comparison
Heavyweight aggregates: Heavyweight concrete contains aggregates that are natural or synthetic which typically weigh more than 2,080 kg/m3 and can range up to 4,485 kg/m3. Heavy weight aggregate is most commonly used for radiation shielding, counterweights and other applications where a high mass-to-volume ratio is desired. ASTM C637 covers aggregates used for radiation shielding and Table (3) contains the physical properties of heavy weight aggregates.
Table (3), Properties of heavy weight aggregates, Mindess Material Classificationa Bulk Specific Gravity 3.5-3.7 3.4-4.0 4.0-4.6 Unit Weight (kg/m3) 2100-2250 2100-2400 2300-2550 Unit Weight of Concrete (kg/m3) 2900-3200 2900-3350 3350-3700
Goethite
N N N
N N N S S