Professional Documents
Culture Documents
Wagstaff Inc - Direct Chill Casting Specialist - TS Europe
Wagstaff Inc - Direct Chill Casting Specialist - TS Europe
Wagstaff Inc - Direct Chill Casting Specialist - TS Europe
>
Direct Chill Casting Specialist - TS Europe
Apply
Job Type
Full-time
Description
Wagstaff is seeking multiple Direct Chill
Casting Specialists. A successful candidate
must be eligible to work in India and/or
Europe. This application is based in Europe.
Please visit our website to view the India-
based position.
Job Summary
Apply extrusion billet and/or rolling ingot
casting knowledge and experience to the unique
set of technical circumstances at each customer
location, including but not limited to evaluating
customer sites, and reading, analyzing and
interpreting data to develop recommendations
for optimal utilization of Wagstaff supplied
equipment. Substantial and extended
international and domestic travel is required.
Requirements
General Characteristics
methods for conventional work
Acquires an understanding of professional
and ethical responsibilities
Technical Responsibilities
Leadership Skills
Direction Received
Communication Skills
Working Environment
While performing the duties of this job on
Wagstaff premises, work is performed primarily
in an adequately lit, well ventilated, climate
controlled general office environment. Close
computer work is regularly required. The work
usually involves minimal physical exertion. The
noise level in the general office environment is
usually moderate.This job may require
occasional or more frequent interaction with
employees on the manufacturing shop floor.
While on the shop floor, the employee may be
exposed to fumes, airborne particles, toxic or
caustic chemicals, risks of moving equipment
and parts, and other risks associated with a
manufacturing environment. Because of this
environment and associated risks, coordination
with shop floor managers/employees may be
necessary before entering the shop floor, and use
of job appropriate personal protective equipment
and clothing is required on the shop floor. The
noise level on the shop floor is often loud.This job
may also require occasional or more frequent
travel to and work at customer sites. While at
customer sites, the employee may be exposed to
fumes, airborne particles, toxic or caustic
chemicals, risks of moving equipment and parts,
and other risks associated with a construction
and/or manufacturing environment. Because of
this environment and associated risks,
coordination with customer
managers/employees may be necessary before
entering the customer site, and use of job
appropriate personal protective equipment and
clothing is required at customer sites. The noise
level at customer sites is often loud.
Reading Frequent
Lift 10 lbs. or less Frequent
Writing Frequent
Lift 10-25 lbs. Frequent
Speaking Frequent
Lift 26-50 lbs. Occasional
Interpreting Data Frequent
Lift 51-100 lbs. Occasional
Planning Frequent
Lift 101+ lbs. N/A
Organizing Frequent
Carry 10 lbs. or less Frequent
Supervising Occasional
Carry 10-25 lbs. Frequent
Problem Solving Frequent
Carry 26-50 lbs. Occasional
Attention to Detail Constant
Carry 51-100 lbs. Seldom
Multi-Tasking Occasional
Carry 101+ lbs. N/A
Sit Frequent
Push/Pull, Slide/Transfer 10 lbs. or less
Frequent
See Constant
Push/Pull, Slide/Transfer 10-25 lbs.
Occasional
Stand Frequent
Push/Pull, Slide/Transfer 26-50 lbs.
Occasional
Walk Frequent
Push/Pull, Slide/Transfer 51-100 lbs.
Seldom
Drive Seldom
Push/Pull, Slide/Transfer 101+ lbs. N/A
Hear Frequent
Climb/Balance Occasional
Turn/Twist/Lean Frequent
Stoop/Kneel/Squat Occasional
Reach/Manual Dexterity Frequent
Crouch/Crawl Occasional
Bend Occasional
Apply
Powered by
Privacy Policy | Payroll & HR Software