Professional Documents
Culture Documents
FieryPro80 Install Manual
FieryPro80 Install Manual
FieryPro80 Install Manual
INSTALLATION MANUAL
10. END-USER
1 LICENSE
1
AGREEMENT
A039IXC001CA
11. READ ME
2. Power cord 3
(U.S.A. / UK
Europe / each 1
Australia) 12. Secure Erase
A039IXC002SA
3. VI cable Administration
Guide
each 1
1 (English/French/
German/Italian/
Spanish)
A039IXC003SA
13. Battery
4. CD/DVD-ROM
Information
USER 1
SOFTWARE
DVD
14. Screw
USER 2
DOCUMENTA- 1 set
TION CD A039IXC002CA
SYSTEM
SOFTWARE Note:
DVD The screws of No. 14 are not used for the control-
Other CDs ler setup.
They are the replacement when the connector
5. Release Notes screw on the side to which the VI cable is con-
(English/French/ nected (main body/controller) is bad. Keep them at
each 1
German/Italian/ hand.
Spanish)
6. Welcome
(English/French/
II. Preparation
each 1 Turn off the machine's sub and main power switches,
German/Italian/
Spanish) and unplug the power cord from the outlet.
7. Gray scale
1
8. Setup Roadmap
1
VI cable connector
Right cover/Rr
Loosen
the screws
A039IXE003SA
VI cable connector
Connector cover
for VI cable
A039IXE001SA A039IXE009CA
3. Install the right cover/Rr (2 screws). 6. Remove the protective sticker from the power
connector on the back of the image controller.
Right cover/Rr
Protective sticker
A039IXE002SA
A039IXE010CA
E-2
7. Connect the power cord to the back of the image IV. Network setting Procedure
controller.
Step
1. On the touch panel, touch “MACHINE”, and
then touch “Controller”.
2. Touch “Setup”.
3. When prompted for the administrator pass-
word, enter Fiery.1.
4. The following three menus will appear.
• Server Setup : Review the default settings
and modify them, if necessary.
• Network Setup 1/2 : Consult with the net-
Power cord work administrator at the customer site.
• Network Setup 2/2 : Consult with the net-
A039IXE011CA
work administrator at the customer site.
8. Connect the network cable to the back of the 5. Touch “Back” and “OK” to return to the Control-
image controller. ler menu.
6. Touch “Restart Fiery.”
A039IXE012CA
Note:
Make sure the machine is on before you turn on
the image controller.
Eject CD/DVD
IP Address
Restart server
Shut Down System
A039IXE013CA
E-3