This document provides technical data for the Dalincast-13 insulating castable product, including its maximum service temperature of 13500C, maximum grain size of 6mm, and water requirement for casting of 25-35%. The castable has a typical density of 1.450 g/cc after drying at 1100C/24h, thermal conductivity of 0.45w/mK at 5000C, and meets specifications for chemical analysis of Al2O3 and Fe2O3. Its typical cold crushing strength is 75kg/cm2 after drying and 62kg/cm2 after heating to 11000C/3h.
This document provides technical data for the Dalincast-13 insulating castable product, including its maximum service temperature of 13500C, maximum grain size of 6mm, and water requirement for casting of 25-35%. The castable has a typical density of 1.450 g/cc after drying at 1100C/24h, thermal conductivity of 0.45w/mK at 5000C, and meets specifications for chemical analysis of Al2O3 and Fe2O3. Its typical cold crushing strength is 75kg/cm2 after drying and 62kg/cm2 after heating to 11000C/3h.
This document provides technical data for the Dalincast-13 insulating castable product, including its maximum service temperature of 13500C, maximum grain size of 6mm, and water requirement for casting of 25-35%. The castable has a typical density of 1.450 g/cc after drying at 1100C/24h, thermal conductivity of 0.45w/mK at 5000C, and meets specifications for chemical analysis of Al2O3 and Fe2O3. Its typical cold crushing strength is 75kg/cm2 after drying and 62kg/cm2 after heating to 11000C/3h.
TYPICAL SPECIFICATION Cold Crushing Strength (Kg/cm2) After Drying at 1100 C/24h 75 60 After Heating at 11000 C/3h 62 40 Permanent Linear Change (%) After Heating at 12000 C/3h -0.70 +/-1.0
Typical range is an average result on production samples subject to normal variation on individual tests.