Professional Documents
Culture Documents
350 360 370 Spec
350 360 370 Spec
Features
• All 316 Stainless Steel Construction
Ideal for sour gas and/or corrosive
environments
• NACE Compliant
Meets NACE #MR-0175 material requirement
for sulfide stress cracking
• 1/4" NPT and 1/2" NPT
Ported Versions
• Autodrain Option
• Low Temperature Option
• High Flow Capacity
• Tapped Exhaust Port
Permits remote venting of
hazardous gases
• Minimal Air Consumption
Low cost of ownership
Type 350/360/370SS Series
Specifications
Regulated Pressure vs. Flow (Type 350/360SS, typical) Pressure Drop vs. Flow (Type 370SS, typical)
(0-100 psig range, 105 psig supply)
Regulated Pressure vs Flow: 1/4” Type 350 Regulated Pressure vs Flow: 1/2” Type 350 1/4" NPT Port 1/2" NPT Port
90 90 10 10
(6.2) (6.2)
SUPPLY
80 Supply Pressure: 100psig 80 Supply Pressure: 100psig 9 120 PSI 9 SUPPLY
(5.5) (5.5)
Cv: 1.2 Cv: 3.3 120 PSI
Regulated Pressure, psi (bar)
70 70 8 8
(4.8) (4.8) SUPPLY
60 60 7 90 PSI 7 SUPPLY
90 PSI
Pressure drop (psi)
(4.1) (4.1)
50 50 6 SUPPLY 6
(3.5) (3.5) 60 PSI SUPPLY
5 5 60 PSI
40 40
(2.8) (2.8) 4 4
30 30
(2) (2) 3 SUPPLY 3 SUPPLY
20 20 30 PSI 30 PSI
(1.4) (1.4) 2 2
10 10 1 1
(0.07) (0.07)
0 0 0 0
0 10 20 30 40 50 60 0 20 40 60 80 100 120 140 160 180 0 10 20 30 40 50 60 70 80 90 100 0 10 20 30 40 50 60 70 80 90 100
(283) (566) (849) (1132) (1415) (1698) (566) (1132) (1698) (2264) (2830) (3396) (3964) (4530) (5097) (0) (283) (566) (849) (1132) (1415) (1698) (1981) (2264) (2547) (2830) (0) (283) (566) (849) (1132) (1415) (1698) (1981) (2264) (2547) (2830)
FLOW, scfm (nl/min) FLOW, scfm (nl/min) Flow, scfm (nl/min) Flow, scfm (nl/min)
Clean, stable performance for tough, dirty process control
Type 350SS
porting
• Competetively priced
• Low droop at high
flow levels
• 316 stainless steel
housing and
filter assemblies
• High flow
ow manual drain
for easy maintenance
• Compact size
• Large flow
ow paths to
minimize pressure
Type 360SS drop
• Meets all NACE
requirements
• Automatic drain
option (shown)
• Excellent stability and
repeatability, even in
c o n t r ol A ir In c .
harsh environments
TYPE 360SS
316 STAINLESS STEEL
Pressure Gauge
370SS
Knob
Ordering
Type 350SS Filter Regulator Options Add proper letter at end of model number.
Model Part Number Port Size Output Range A - Automatic Drain (Type 350 and Type 370 only)
(NPT) (psi) (BAR) Float operated drain with 1/8” NPT connection. Maximum 150 psig
supply pressure. Minimum 32°F (0°C) temperature.
350SS 350-BA 1/4" 0 - 30.0 0 - 2.0 F - 5 Micron Filter
350SS 350-BB 1/4" 0 - 60.0 0 - 4.0 Standard 25 micron filter is replaced with 5 micron filter for more com-
plete air filtration
350SS 350-BC 1/4" 0 -100.0 0 - 7.0
K - Knob with stainless steel stem
350SS 350-BD 1/4" 0 -150.0 0 -10.0 L - Low Temperature Operation
350SS 350-DA 1/2" 0 - 30.0 0 - 2.0 For “Arctic” applications. Good for temperatures range of -61°F to
+194°F (-52°C to +90°C). Not suitable for sour natural gas
350SS 350-DB 1/2" 0 - 60.0 0 - 4.0
N - Nonrelieving
350SS 350-DC 1/2" 0 -100.0 0 - 7.0 For constant flow or downstream pressure relief applications
Applications
Type 370SS Filter
The Type 350/360/370SS is used extensively by OEMs and
Model Part Number Port Size end users to supply clean air to pneumatic controllers,
(NPT) transmitters, transducers, valve positioners, air cylinders,
370SS 370-BX 1/4" and a wide range of pneumatic control systems.
8 Columbia Drive / Amherst, NH 03031 USA / www.controlair.com / sales@controlair.com / 603-886-9400 / FAX 603-889-1844
An ISO 9001:2015 Registered Company
P/N 441-625-023 8/17/20