Professional Documents
Culture Documents
PDS Stopaq Wrappingband SZ V3 EN1
PDS Stopaq Wrappingband SZ V3 EN1
STOPAQ® WRAPPINGBAND SZ
®
Product properties of Stopaq Wrappingband SZ
Product Information Colour Dark green
Thickness 3.5 mm
®
Product description: Stopaq Wrappingband SZ is a corrosion Density 1.3 – 1.4 g/cm³ [10.8 – 11.7 lb/gal] (NEN 1833)
preventing wrap material, adhering extremely well to wet surfaces such Temperature ranges Operational: -20 to +50°C [-4°F to +122°F]
as immersed bare - or coated - steel. It is a non-crosslinked, non- Substrate during +5 to +40°C [+41°F to +104°F]
crystalline, monolithic viscous polymer based, prefabricated wrap application: (immersed)
coating with cold flow, self-healing, visco-elastic properties. Stopaq® Drip resistance Tested 48h@+85°C [+185°F] *) : No dripping of
Wrappingband SZ is viscous at the indicated operating temperatures compound
and, due to its liquid nature, flows into all irregularities of the substrate. Peel strength test Tested on steel (dry, wetted with fresh water, and
The compound does not cure and is unable to build up internal stress. wetted with 3% NaCl), St 2 / St 3 prepared surface
@ +23°C [+73°F] and @ +50°C [+122°F] *) :
Stopaq® Wrappingband SZ is applied as elementary part of the Stopaq® Cohesive failure
Splash Zone Coating System and requires additional mechanical ≥ 95% coverage of surface
protective layers like Stopaq® Subsea Intermediate Wrap and Stopaq® Lap shear test Tested on steel (dry, wetted with fresh water, and
Outerglass Shield. This improves impact and indentation resistance of wetted with 3% NaCl), St 2 / St 3 prepared surface
@ +23°C [+73°F] and @ +50°C [+122°F] *) :
the coating system and ensures adequate performance of the corrosion
Cohesive failure
preventing properties.
≥ 95% coverage of surface
®
Features: Properties of Stopaq Splash Zone Coating System
Controlled cold flow providing permanent inflow into the finest pores of Construction 1. Stopaq® Wrappingband SZ: 2 layers.
2. Stopaq® Subsea Intermediate
the substrate
Wrap: 2 layers.
Resistance to low temperatures without getting brittle 3. Stopaq® Outerglass Shield XT24: 3 layers.
Conforms to irregular shapes Total thickness ± 9 mm [± 3/8 inch]
Low surface tension; adheres on many types of wet substrates at a Impact resistance Tested @+23°C [+73°F]: > 15 J [> 132 in.lbf] *)
molecular level Specific electrical Rs100 > 108 Ω.m² [> 107 Ω.ft²] *)
Surface tolerant: no blasting techniques required, wire brushing is insulation
sufficient (ISO 8501-1: St 2) resistance
Constant film thickness *)
According to ISO 21809-3:2008/Amendment 1:2011
Adhesion based on vanderWaals forces
Seal For Life Industries LLC Seal For Life Industries Mexico Seal For Life Industries Seal For Life Industries BVBA Seal For Life India Private Ltd.
Franklin, MA, USA S de R.L. de C.V. Stopaq B.V. Westerlo, Belgium Baroda, India
Tel: +1 508 918 1600 Tijuana, Mexico Stadskanaal, the Netherlands Tel: +32 14 722 500 Tel: +91 2667 264 721
Toll Free: +1 800 248 7659 Tel USA: +1 858 633 9797 Tel: +31 599 696 170 Fax: +32 14 722 570 Fax: +91 2667 264 724
Fax:+1 508 918 1905 Fax USA: +1 858 633 9740 Fax: +31 599 696 177 belgium@sealforlife.com india@sealforlife.com
franklin@sealforlife.com Tel Mx: +52 664 647 4397 info@sealforlife.com
Fax Mx: +52 664 607 9105
mexico@sealforlife.com