Professional Documents
Culture Documents
Vol III Supplementary Data
Vol III Supplementary Data
Vol III Supplementary Data
Supplementary Data
Taurus™ 70S Gas Turbine-Driven Compressor Set
SONATRACH
South West Field HMS
Package Serial Numbers: TC20653, TC20654, TC20655, TC20656
Supplementary Data
Taurus™ 70S Gas Turbine-Driven Compressor Set
SONATRACH
4C072
Volume III
Volume III
Supplementary Data
Taurus™ 70S Gas Turbine-Driven Compressor Set
SONATRACH
South West Field HMS
Package Serial Numbers: TC20653, TC20654,
TC20655, TC20656
Solar, Saturn, Centaur, Mars, Mercury, Taurus, Titan, SoLoNOx, and Turbotronic are
trademarks of Solar Turbines Incorporated. Cat and Caterpillar are trademarks of Caterpillar Inc.
Specifications subject to change without notice. Printed in the U.S.A.
Additional copies may be obtained from Solar Turbines Incorporated, P.O. Box 85376,
San Diego, California 92186-5376. Address requests for copies to the attention of
Customer Services and refer to the publication number appearing on the bottom of
the title page.
RECORD OF CHANGES
This page may be used to record changes to the manual made by Publication changes,
Service Bulletins, or local changes and corrections.
Change, Date
or Bulletin Pages
Number Description Affected Date
FOREWORD
This technical manual covers the Taurus™ 70S Gas Turbine-Driven Compressor Set
designed and manufactured by Solar Turbines Incorporated in San Diego, California.
Procured under Solar Project Definition No. 4C07 by L&T Hydrocarbon International
FZE for SONATRACH, this equipment is designated for the South West Field HMS,
Algeria installation site.
Training for this and other equipment is available. For the latest class and
registration information, visit the Customer Support section of our home page at
www.solarturbines.com.
EQUIPMENT IDENTIFICATION
The technical manual is provided in a four-volume set. Part numbers referred to within
the manual set are Solar part numbers unless otherwise specified. Each volume of the
set stands alone and is described in the following paragraphs.
Volume I is for equipment operator use. Locations and descriptions for all operator
controls and indicators are provided. Procedures for starting, stopping, and operating
the equipment are also included.
Volume II is for maintenance and field service personnel use. The functions of major
systems and subsystems are described, and component descriptions are included.
Maintenance instructions, and alignment and checkout procedures are provided. The
introduction chapter provides maintenance schedules, torque tables and maintenance
information for the mechanical systems on the package.
Volume IV lists part numbers, part names, quantities required, reference designators,
and drawings to locate parts used in the turbine package. Various indices are provided
to aid the user in locating piece parts within the package.
SUPPLEMENTARY DATA
Solar
Part Name Part No. Manufacturer
Volume III
Solar
Part Name Part No. Manufacturer
Solar
Part Name Part No. Manufacturer
Solar
Part Name Part No. Manufacturer
Solar
Part Name Part No. Manufacturer