Professional Documents
Culture Documents
Pre-Test 2
Pre-Test 2
PRACTICE TEST 2
Answer all questions. Show all the steps in your working of each problem.
Question 1
(Topic: Work & Energy)
The system shown is at rest when a constant force of 100 N is applied to collar B.
(a) If the force acts through the entire motion, determine the speed of collar B as it strikes the
support at C.
(b) What is the distance 𝑑𝑑 when the 100-N force is removed if the collar is to reach support C with
zero velocity?
(5 marks)
Question 2
(Topic: Work & Energy)
(5 marks)
1/2
PRE-TEST 2 SEM 2-2022/2023
SMJP1053 - DYNAMICS DR. AHMAD FAIZ MOHAMMAD
Question 3
(Topic: Rigid Body Kinematics)
A pulley and two loads are connected by inextensible cords as shown. The pulley starts from rest
at 𝑡𝑡 = 0 and is accelerated at the uniform rate of 2.4 rad/s2 clockwise.
At 𝑡𝑡 = 4 s, determine the velocity and acceleration of (a) load A and (b) load B.
(5 marks)
Question 4
(Topic: Rigid Body Kinematics)
Three belts move over two pulleys without slipping in the speed reduction system shown above. At
the instant shown, the velocity of Point A on the input belt is 0.60 m/s to the right, decreasing at
the rate of 1.8 m/s2.
Determine, at this instant, (a) the velocity and acceleration of Point C on the output belt, and (b)
the acceleration of Point B on the output pulley.
(5 marks)
2/2