UAS Bahasa Inggris - 2002311051 - Muhammad Figo Nurdiasnyah

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 1

Nama : Muhammad Figo Nurdiansyah

Nim : 2002311051
Mata Kuliah : Bahasa Inggris

1. Answer the following question correctly. Some patterns given in the brackets is the way to
answer the question.
1) The safety gloves are used for protecting our hand from welding thermal radiation and
sparks from welding process
2) We have to use wearpack in order to protect ourself from dangerous thing when doing
benchwork, such as sharp objects and excess dusts.
3) A. Use wearpack, safety shoes and other safety equipments needed.
B. Prepare coin before borrowing tools.
C. Clean the tools before returning to tools store.
D. Clean your work area before leaving workshop.
4) A. Use safety equipments.
B. Dont kidding while working.
C. Make sure your work area is clean.
D. Don’t smoke inside workshop.
E. Keep dangerous things inside safe places.
5) The other word of victim is injured person.
2. Complete the following sentence with suitable connector.
1) In engineering, motor usually means both electric motor, and refer to petrol and diesel
engine.
2) A machine is neither an engine nor a piece of equipment.
3) Although engine is motor that converts thermal energy to mechanical work, it is not
called heating process.
4) Most car used water to cool the engine however, engine is not used to cool water.
5) In the first semester of mechanical student, they learn/practice both milling machine
and drilling machine
3. The following statements are about the proportion and ratio explaining transmission. On your
answer sheet, write C for correct and IC for incorrect.
1) We say gear A has a smaller number of teeth than gear B. That is 36 and 45, the ratio
between the teeth is 4 to 5. (C)
2) So gear b is slower than gear A. (C)
3) There is no relation between gear A and B. (IC)
4) There is relationship between the distance of two sprockets and the length of the chain
used. (C)
5) The longer the chain, the speed is faster. (IC)
6) Pulleys are usually used by chains. (IC)
7) The fan is turned by the belt which is attached to the wheel. (C)
8) The engine turns the belt, which turns the fan, the faster the belt the faster the fan. (C)
9) In other word the belt is inversely proportional to the fan. (IC)
10) The chains turn the wheel, which makes the bycycle move forward, the movement of
bicycle and the speed of wheel has direct proportion. (C)

You might also like