Hamza Alfalahat

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Hamza Alfalahat hamzeh028@gmail.

com
+962772347572

Electrical Engineer Madaba, Jordan


Jordan
4-4-1992
Married
https://www.linkedin.com/in/hamza-
al-falahat-145599144

Summary
I was graduated with a bachelor’s degree in electrical engineering and I have been working in that field in one of the biggest industrial
groups in Jordan in the industrial sector, I am looking forward to building my career, and for making the first step I am ready to be part
of any type of job-related to my field of study and experience.

Work Experience

Jan 2020 Present Senior Electrical Maintenance Engineer


JORDAN MAGNESIA
Dead SEA, Jordan
Jordan Magnesia Company is a chemical plant for producing magnesium oxide commercially known as
Magnesia, located at Dead sea Jordan, the plant run for almost 4 years but after that and for financial issue
it was put out of service for more than 14 years until a completely new rehabilitation project start, I started
work in the company as an Electrical Maintenance engineer and then my role was to lead and supervise the
rehabilitation plan for plant electrical power system with the following task.
 Develop inspection, testing, preventative maintenance plans and troubleshooting for critical electrical
equipment, such as stacker, Reclaimer, ESP filter, Air compressors, high voltage transformers, RMUs,
switchgear, diesel generator, rectifiers, uninterruptible power supply (UPS), safety critical instrumentation,
And process control systems
 Advise management and develop plans for appropriate maintenance practices of electrical and control
systems.
 Complete commissioning for new variable frequency drives, DC drives and Emergency network (Generators
and UPS system).
 Review electrical equipment inspection data, direct corrective actions and develop equipment plans to
address long term reliability.
 Responsible for requesting and replace all defected items in the electrical power system.
 Design and manage small capital projects, including making electrical drawings, equipment specifications.
 Follow up rehabilitation plan and assign tasks for each group individually to ensure completing the job with
the specified time frame and manpower.
 Troubleshooting machines and analyze any failures after plant starting.
 Conduct root-cause analysis of electrical equipment failures.
 Attend meetings, write reports and make presentations to management.
 Assist the automation group in troubleshooting and maintenance and commissioning (DCS system based on
Emerson DeltaV controller).
 Support the team in testing, commissioning and replacement for plant instrumentation.

Aug 2019 – Dec 2019 Electrical Maintenance Engineer


JORDAN MAGNESIA
Dead SEA, Jordan
 Complete commissioning for new variable frequency drives, DC drives and Emergency network
(Generators and UPS system).
 Follow up rehabilitation plan to ensure completing the job with the specified time frame and manpower.
 Troubleshooting machines and analyze any failures after plant starting.
 Conduct root-cause analysis of electrical equipment failures.
 Attend meetings, write reports and make presentations to management.
EDUCATION

Sep 2013 – Jun 2017 Electrical Engineering


Jordan University of science and technology
Irbid, Jordan
Bachelor of Electrical engineering \ Power and Control – grade (good - 75.8)

Sep 2010 – Jun 2013 Instrumentation


Al Balqa applied university- faculty of engineering technology
Amman, Jordan
Diploma of Instrumentation and process control – grade (V. good - 79.1)

COURSES

June 2018 Training course in PLC


Science caravan academy
Training course in plc advance & scada wincc run time using TIA portal
Program for engineers
(75 hour) (Certified from ministry of labor and ministry of foreign affairs).

June 2016 Power Electric Substation


Jordan Engineers Association
Program in Power Electric Substation 11 and 33 \ 0.4 KV (15 hours)

Oct 2011 Training course in PLC


Al Balqa applied university- Consultations, Studies and Training Center
Training course in programmable logical controller PLC (30 hours)

PERSONAL SKILLS

Leader ship 90% communication 80%

Self-Motivation 80% Decision Making 90%

Troubleshooting 80% Flexibility 90%

LANGUAGES

Arabic English

MY TIME MOST PROUD OF

Physical organization
Working (33%) Creative thinking, Effectiveness, Productivity

Family (20%) Planning


Analyzing issues, Decision making, Project management, strategic
Entertainment (15%) planning

Relaxing (32%) Team work


Collaboration, Delegation, Goal sitting, Leadership

You might also like