Professional Documents
Culture Documents
Saf DS80 MTL BK
Saf DS80 MTL BK
2
2 3 1
BLI / MB BLN
Schematic drawing of control panel
1. Bolts
2. Reset Button 5. Emergency Lock Cover
3. Battery Compartment 6. Start button
4. Knob (Master Key) 7. Power Supply: 4 AA batteries
Upon first opening, users should open the safe with the emergency key. The operation ● With the door open, press “START” button, the LED display will show “----”.
in details refers to “opening the safe with the emergency key”. ● Input your new user code(6 digits), and press the “RESET” button to confirm.
● Remove emergency lock cover, then insert the emergency key, and turn it count ● The display will show “USER-IN” to indicate the code setting is successful. So now
clockwise. you can use your safe box by new code.
● Turn the knob (master key) clockwise to open the door.
BLI/MB : SETTING THE MASTER CODE
CAUTION: Finish operation, pull out the emergency key and keep it in a safe
place. ● With the door open, press the “RESET” button, the LED display will show “----”.
● Then press the “START” button, and “----”on the LED display will stop flashing,
which indicate the lock has enter into the state of code setting.
● Input any 6 digits code, LED display will show “SUPER-IN”
INSERTING THE BATTERIES ● The display will show “SUPER-IN” to indicate the master code setting is successful.
So now you can use your safe box by new code.
● Open the door.
● Insert 4AA batteries into the battery compartment. BLN : SETTING THE USER CODE
● Under normal condition, if the LED display shows “LO-BAT”, you should change the
batteries after entering “START” button. ● With the door open, press the “RESET” button, the LED display will show “----”.
● Press the “START” button, input your new user code(6 digits)
CAUTION: Replace 4 fresh batteries by lining them up in a manner as indicated by ● The display will show “USER-IN” to indicate the code setting is successful. So now
the “+“ and “ - ” signs. When outage for thirty minutes or longer, you should reset the you can use your safe box by new code.
user code.
BLN :SETTING THE MASTER CODE
● With the door open, press the “START” button, the LED display will show “----”.
OPENING DOOR ● Input any 6 digits code, Then press the “RESET” button,
● The display will show “USER-IN” to indicate the master code setting is successful.
● Press “START” button, and the LED display will show “----” So now you can use your safe box by new code.
● Input your user code (6 digits), The code lock will be unlocked with the green light
on the key pad.
OPENING THE SAFE IN EMERGENCY
● Turn the knob (master key) clockwise and open the door.
CAUTION: The user preset code “123456”.The code lock has the function of Upon first receipt of the safe, or either the electronic circuit malfunction or codes
auto-locking, and if there is not any operation after inputting the code, the lock will unknown. You could also use the emergency key to open the safe.
lock automatically again. If inputting wrong code for three times, the lock will lock ● Remove the cover of the emergency lock.
automatically for 3 minutes. ● Insert the emergency key to the key hole, turn count clockwise, then turn the knob
(master key) clockwise to open the door.
CLOSING DOOR
● Turn the knob (master key) counter clockwise to close the door.
SMS-00-BLI