Professional Documents
Culture Documents
Book1 Form
Book1 Form
Input the baseline value: From the "rdf" file and "CPT Acquisition Log"
Check the calculated result: Offset: Not >2% FSO; Application Class: 1 & 2
Note: Sleeve load cell baseline shifts for subtraction-type cone usually can exceed 2% FSO
Cone area (cm2): 2
Sleeve area (cm2): 30
Cone area Factor: 0.6977 =IF(E15="-","-",(E15/$E$14)*100)
=IF(OR(D15="",D15="-"),"-",($V$11*D15)+$V$12)
Calibration (Tip)
Bit Kg
5751 0
28707 500 Offset
% FSO MPa
51664 1000
Baseline (On deck - Before test) 5692 -1.3 -0.1 -0.063
Baseline (On deck - After test) - - - -
Baseline (On seabed - Before test) 5917 3.6 0.4 0.177
Baseline (On seabed - After test) 5912 3.5 0.4 0.172
=IF(E17="-","-",(E17/$E$14)*100) =IF(OR(G18="-",G
=IF(E18="-","-",(E18/$E$14)*100)
Calibration (Sleeve) =IF(E27="-","-",(E27/$E$26)*100)
Bit Kg
6187 0
28158 500 Offset
% FSO MPa
50128 1000
Baseline (On deck - Before test) 6066 -2.8 -0.3 -0.009
Baseline (On deck - After test) - - -
Baseline (On seabed - Before test) 6282 2.2 0.2 0.007
Baseline (On seabed - After test) 6249 1.4 0.1 0.005
Calibration (u2)
Bit MPa
11788 0
35899 10 Offset MPa
60010 20 % FSO
Baseline (On deck - Before test) 11741 -0.02 -0.1 -0.019
Baseline (On deck - After test) - - -
Baseline (On seabed - Before test) 13004 0.50 2.5 0.504
Baseline (On seabed - After test) 13003 0.50 2.5 0.504
Note: if the application class is not 1 or 2, it means the cone is not fulfill the minimum accuracy requirement, therefore the cone should be repl
","-",(E15/$E$14)*100) =IF(E15="-","-",(E15/$C$5/$J$3))
=IF(E17="-","-",(E17/$C$5/$J$3))
=IF(E18="-","-",(E18/$C$5/$J$3))
=IF(OR(G18="-",G17="-"),"-",ABS(G18-G17)*1000)
",(E27/$E$26)*100) =IF(E15="-","-",(E15/$C$5/$J$3))
=IF(E29="-","-",E29/$C$6/$J$3)
=IF(E30="-","-",E30/$C$6/$J$3)
Kg
slope 0.0217803237 1200
intercept -125.2550112 1000
f(x) = 0
800
600
400
200
0
0 10000
Kg
slope 0.0227577888 1200
intercept -140.8062325 1000
f(x) = 0.0247
800
600
400
200
0
0 5000 10000 15
MPa
slope 0.0004147485
25
intercept -4.889054788
20
f(x) = 0.000
15
10
5
0
0 10000 20000
Convert to pressure (MPa)
Overall Class
On deck (Before test) On seabed (Before test)
Deck Seabed Tip Sleeve Pore Tip Sleeve Pore
- >3 1.502 0.054 -0.358 1.776 0.072 0.122
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
Kg
1200
1000
f(x) = 0.0235377191906632 x − 159.471970377604
800
600 Kg
400 Linear (Kg)
200
0
0 10000 20000 30000 40000 50000 60000
Kg
1200
1000
f(x) = 0.0247561519037481 x − 160.914987374362
800
600 Kg
400 Linear (Kg)
200
0
0 5000 10000 15000 20000 25000 30000 35000 40000 45000 50000
MPa
25
20
f(x) = 0.000407539480330756 x − 4.47919850368455
15 MPa
10 Linear (MPa)
5
0
0 10000 20000 30000 40000 50000 60000 70000
Convert to pressure (MPa) Zero Drift (kPa)
On seabed (After test) Back to deck (After test) (Deck)
Tip Sleeve Pore Tip Sleeve Pore qc fs u2
1.777 0.072 0.179 - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
Note: low accuracy if the class vaule is 9
Class Zero Drift (kPa) Class
(Deck) (Seabed) (Seabed)
qc fs u2 qc fs u2 qc fs u2
- - - 1.1 0.0 57.7 1 1 9
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -