Professional Documents
Culture Documents
lcs+35-DDD-SKF3구리스펌프 레벨센서
lcs+35-DDD-SKF3구리스펌프 레벨센서
Display elements LED green / LED red | Switching output not set/ set
26,7
Weight 120 g
47
5,2
11
○ To sensor objects entering the sound field later- The high-level indication of the ultrasonic
ally, the Teach-in procedure »Set switch point +8 sensors described in these instructions has
% – Method B« should be chosen. There will be set been programmed unchangeably by the
a switch point exceeding the actual distance to the manufacturer (switch point D3 / 65 mm re-
Switch the power supply off Switch the power supply off
object by 8 %. By doing so a stable switch point will be spectively 120 mm). The low-level indication,
ensured even in case of minor height fluctuations. and as the case may be, the pre-low-level
or pre-high-level indications may be freely
Set switch point - Method A programmed by the programmer on switch
points D1 and D2 via the described method.
Switch on power supply while pushbut- Switch on power supply while pushbut-
ton T1 is pressed ton T1 is pressed
T1 D1 D2 T2
Wait 10 seconds
Standard operation
Manufacturer: SKF Lubrication Systems Germany GmbH, Heinrich-Hertz-Str. 2-8, DE-69190 Walldorf 2/ 4
© Copyright SKF
Document no.: 951-181-031-EN / State of the information: 2021/07/27 / Version 02
Sensor setting with Teach-in: Set switch point D1
1 1
1 2
1
85 %
Keep pushbutton T1 pressed for Keep pushbutton T1 pressed for Keep pushbutton T1 pressed for Keep pushbutton T1 pressed for Keep pushbutton T1 pressed for about
about 3 seconds until both LEDs flash about 3 seconds until both LEDs flash about 3 seconds until both LEDs flash about 3 seconds until both LEDs flash 13 seconds until both LEDs flash
simultaneously simultaneously simultaneously simultaneously alternately
Wait 10 seconds
Standard operation
Manufacturer: SKF Lubrication Systems Germany GmbH, Heinrich-Hertz-Str. 2-8, DE-69190 Walldorf 3/ 4
© Copyright SKF
Document no.: 951-181-031-EN / State of the information: 2021/07/27 / Version 02
Sensor setting with Teach-in: Set switch point D2
1 1
1 2
1
85 %
Keep pushbutton T2 pressed for Keep pushbutton T2 pressed for Keep pushbutton T2 pressed for Keep pushbutton T2 pressed for Keep pushbutton T2 pressed for about
about 3 seconds until both LEDs flash about 3 seconds until both LEDs flash about 3 seconds until both LEDs flash about 3 seconds until both LEDs flash 13 seconds until both LEDs flash
simultaneously simultaneously simultaneously simultaneously alternately
Wait 10 seconds
Standard operation
Manufacturer: SKF Lubrication Systems Germany GmbH, Heinrich-Hertz-Str. 2-8, DE-69190 Walldorf 4/ 4
© Copyright SKF
Document no.: 951-181-031-EN / State of the information: 2021/07/27 / Version 02