Practice Quiz 1 Mechanical Electrical Acoustics Lighting

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 10

Question 1

1 / 1 pts
The specification on the electric wire XHHW refers to?

Moisture Resistant Rubber Thermosetting Polyethylene

Moisture and Heat Resistant Thermoplastic

Moisture and Heat Resistant Rubber

Correct!

Moisture and Heat Resistant Cross Linked Thermosetting Polyethylene

Question 2
1 / 1 pts
The specification on the electric wire THWN refers to:

Heat Resistant Cross Linked Thermosetting Polyethylene

Moisture and Heat Resistant Rubber

Moisture and Heat Resistant Cross Linked Thermosetting Polyethylene

Correct!

Moisture and Heat Resistant Thermoplastic

Question 3
1 / 1 pts
What is a rubber or plastic washer inserted in a hole in a metal part to prevent
grounding of a wire passing through the hole?

shield

Correct!

grommet

insulator

bushing

Question 4
1 / 1 pts
It is a switch in which a hinge copper blade is placed between two contact clips.

mercury switch

Correct!

knife switch

toggle switch

float switch

Question 5
0 / 1 pts
What type of wire or cable with specification as building wire for wet and dry locations
with an operating temperature of 75 degrees centigrade?
USE

UF

You Answered

XHHW

Correct Answer

THW-oil

Question 6
0 / 1 pts
A type of alternating current where the alternator comprises three armature winding set
at 120 degrees to each other, current will be produced in the form of triple wave:
You Answered

two phase

multi phase

single phase

Correct Answer

three phase

Question 7
1 / 1 pts
What type of a flexible cable which is fabricated assembly of insulated conductors in a
flexible metal sheath?
Correct!

armored cable type AC

mineral insulated cable type MI

metal clad cable type MC

metal clad cable type AC

Question 8
1 / 1 pts
This is a type of Alternating current generated by the alternator where its wave rises to a
peak, sinks to zero, drops to a negative peak, and rises again to zero a number of times
each second, depending on the frequency for which the machine is designed

multi phase

two phase

three phase

Correct!

single phase

Question 9
0 / 1 pts
what device is used for converting chemical into electric energy, usually consisting of a
receptacle with electrodes in an electrolyte?

electrode

You Answered

battery

Correct Answer

cell

electric motor

Question 10
0 / 1 pts
This is the over head service conductors from the last pole or other aerial support to and
including the splices, if any, connecting to the service entrance conductors at the
building or other structure. What is being defined?

secondary distribution main

overhead service-entrance conductors

Correct Answer

service cable

You Answered

service drop
Question 11
1 / 1 pts
Sound heard as perfectly as possible at the right level or loudness without pain or strain

flutter echo

reverberation

unwanted sound

Correct!

wanted sound

Question 12
1 / 1 pts
Subjective attribute of an auditory sensation in terms of which sounds may be ordered
on a scale of soft to loud

wavelength

unwanted sound

wanted sound

Correct!

loudness

Question 13
1 / 1 pts
What term is that any vibratory motion of bodies, the transmission of these vibrations in
a medium, and the sensation produced on the human auditory mechanism?

echo

noise

unwanted sound

Correct!

sound

Question 14
0 / 1 pts
This is produced by impact, by vibrating bodies, even by speech or music
You Answered

noise

disturbance

wanted sound

Correct Answer

sound

Question 15
1 / 1 pts
This is a form of energy propagated in waves which continue to subsist until filtered
through a material turning into heat by friction

noise

music

echo

Correct!

sound

Question 16
0 / 1 pts
A measure of the decrease in sound level when sound passes from one room to the
other, such as from one side of a wall to the other side
You Answered

acoustic barrier

Correct Answer

acoustic isolation

acoustic analysis

acoustic distribution

Question 17
1 / 1 pts
What is that type of panel which is designed to absorb sound and thus regulate the
acoustic quality of a space

acoustic board

acoustic wall

acoustic barrier

Correct!

acoustic panel

Question 18
1 / 1 pts
Acoustics; physical or spatial measures, materials or components added to affect the
acoustic perception and performance in a space with respect to sound insulation,
absorption and reflection
Correct!

acoustic treatment

acoustic barrier

acoustic

acoustic wall

Question 19
1 / 1 pts
Noise that arrives at a point of interest by propagation through the air

airborne noise

airborne

Correct!

airborne sound

echo

Question 20
0 / 1 pts
Closely related to fluorescent lamps in operating principles, primary applications are
signs and specialty lighting, tubular lighting that can be formed into any shape and be
made to create any color of light. Cold cathode lamps are generally larger in diameter
than neon lamps and comes with a plug-in base while neon tubing usually terminates is
base wire connections

fluorescent lamp

You Answered

incandescent lamps

HID lamps

Correct Answer

neon lamps

You might also like