Central Railway Headquarter Office
S&T Branch, 3" Floor,
Annexue Building,
CSMT, Mumbai
No.CR/SPN/TC-2015 Date : 19-12-2017
CSTE/C-1& II,
Sr DSTE/Co/BB,
Sr DTSEs NGP, BSL, PA & SUR,
CWM/Byculla.
Sub : Specification of Aadhaar Enabled Biometric Attendance System
(AEBAS) Specification no. CR/SPN/AEBAS-1/2017
Railway Board had issued various instructions for implementing Aadhaar
Enabled Biometric Attendance System (AEBAS) in Zonal Railways, Divisional Units
and other various field units since year 2014. Of late, Railway Board has further
reiterated upon for its timely implementation, This activity is primarily being done by
Personnel department at Headquarter and Division. S&T Department has to provide
suitable Biometric devices and connect them to Intemet through Railnet at the
locations to be decided by the nodal officers of the respective departments.
In light of above, a specification no. CR/SPN/AEBAS-1/2017 has been
prepared for the purpose of procurement of AEBAS device. Based upon the data
furnished from your respective divisions, the procurement has been processed based
upon this specification. This specification shall be used for future procurement till
further modification advised by this office.
f
AY
Ae
(Ravi onPhase)
Dy. CSTE/HQ
This is issued with approval of PCSTE.
Encl: PCSTE's specification No. CR/SPN/AEBAS-1/2017 did. 19-12-2017 is furnished
overleaf.Enclosure of Letter No, CR/SPN/TC-2015 dtd : 19-12-2017
PCSTE’s Specification No.CR/SPN/AEBAS-1/2017
Date of issue : 19-12-2017
Specification for “Aadhaar Enabled Biometric Attendance System (AEBAS) with Smart Card support,
UIDAL certified Fingerprint Scanner device both P E 8023 af) and 12 VDC operable,
supporting multiple mode of connectivity with auto fallback ie. LAN, 3G/4G and Wi-Fi along-with
230volt AC adapter”
LO Gen
{cquirements
1.1 The specification has been prepared for procurement of Aadhaar Enabled Biometric Attendance
System (AEBAS) with Smart Card Support to be deployed over Central Railway. The AEBAS
‘equipment shall be used for marking attendance using embedded client software of NIC along
with NIC Server working on real time basis over the Internet. This equipment shall capturing
Fingerprint by means of scanning and accepting part or full Aadhaar number by manual entry or
through a suitable smart card for each and every registered employee.
1.2 The device shall be Certified registered device of UIDAI. Copy of the certification shall be
furnished by the bidder.
1.3. Bidder/OEM has to provide all necessary technical support for integration of their
device drivers with the attendance software and associated UIDAI applications.
1.4 The device shall have On-site warranty of one year.
2.0 Technical requirements
2.1 The device should support all type of Industry Standard RFID Card. Bidders are advised to
mention the types of card currently available in the industry supported. by their device
2.2 The device should be compact in design with touch screen display with Capacitive Touch pane!
having numeric soft-key provision of size not less than 3.5". It should have pluggable Card
Reader Module with IP 65 rating.
2.3. The device should have the capability to be powered by both external supply as well as Power
over Ethernet (PoE).
24 Itshould support various connectivity viz. Ethernet, Mobile Broadband (3G/4G)
and Wi-Fi with auto fallback arrangement.
2.5 The Fingerprint Sensor isto be of optical in nature and certified by STQC.
2.6 The Device should also have Credence verification by RFID Card and AADHAR
having Smart Card read/write capabilities
2.7 Embedded Operating Platform Support: Linux.
2.8 Reader Interface Type : RS-232 and Wiegand INIOUT
2.9 Input Power : 12VDC with AC Power Adaptor
2.40 Operating temperature : 0 degree to 50 degree Celsius.
2.11 Centifications : STQC, ROHS, CE, FCC, BIS, Shock and Vibration Proof
Note : The technteal specification described In the above clauses are mintmunt exsential
device is intended 10 comply the general requirements described In clauses II to lt. Upm
gradation of any of the parameter mentioned above, f required, for meeting general
requirements need 0 be ensured by the bidder.