Professional Documents
Culture Documents
Tata Steel - AR400 & 450
Tata Steel - AR400 & 450
Tata Steel - AR400 & 450
AR400 / AR450
Hot-rolled, abrasion-resistant coil in unique dimensions for
efficient processing
Tata Steel is expanding its range of high-strength steels with the compared to plate. This could reduce additional processing steps like
introduction of abrasion-resistant hot-rolled coil in the 400 and 450 shot blasting.
Brinell hardness ranges. The product developments target a unique
dimensional capability in hot-rolled abrasion-resistant coil. About three Consistent product properties and reliable material thickness allow
times as hard as grade 50, this product allows for thinner gauges and trouble-free, repeatable processing. AR400 and AR450 offer good
lightweighting whilst providing excellent abrasion and wear resistance. weldability and have been designed for thermal cutting processes
Applications include dump truck bodies, asphalt finishers, mining, including laser and (micro) plasma methods.
screening and forestry equipment.
Please note: as AR400 and AR450 are currently under development, the
The coil can be cut into specific lengths to match your exact final dimensions and specifications in this preliminary data sheet may
requirements - adding more flexibility and reducing waste through the change. Our technical specialists will be happy to update you and
supply chain when compared to discrete plate. Also, the cut-to-length answer your questions.
sheet delivers an excellent surface quality with better thickness control
Mechanical properties
The values shown for the mechanical properties apply to test samples
parallel to the rolling direction.
Guaranteed
Grade Direction Thickness Temperature (full size specimen)
AR400 and AR450 Longitudinal 0.236” min. -40°F ≥ 20 ft.lbs
Available dimensions
width (inch)
80
60
49
45
■ AR450
■ AR400
Product support
We want you to get the best from our products. Our technical support
staff and trained sales force are always happy to answer your questions
on steel selection and application. Our technical specialists are
available to assist you with process and product design optimization
for improved throughput, yield and end product performance.
www.tatasteeleurope.com
Tata Steel While care has been taken to ensure that the information contained in this
PO Box 10.000 publication is accurate, neither Tata Steel Europe Limited nor its subsidiaries
1970 CA IJmuiden accept responsibility or liability for errors or information which is found to
be misleading.
The Netherlands
E: strip.enquiries@tatasteel.com Tata Steel Europe Limited is registered under number 05957565 with
www.tatasteelamericas.com registered office at 30 Millbank, London, SW1P 4WY.
Copyright 2017
IS0117:30:US:0217 Tata Steel Europe Limited