Professional Documents
Culture Documents
ELC 260S Tutorial 1 Sem 1 2022
ELC 260S Tutorial 1 Sem 1 2022
ELC 260S Tutorial 1 Sem 1 2022
QUESTION 1
Water is pumped to a height of 150 m at a rate of 300 litres per minute. The efficiencies of the
pump and the 200 V driving motor are 73 % and 82 % respectively.
Determine:
QUESTION 2
Calculate the length of the resistor of a circular wire used in a heater element connected to a
240V supply and the heater consumes 8 joules of energy in 0,25 seconds. The resistor element
is made of aluminium and it has a uniform cross-sectional area with a diameter of 0,00016
inches.
Hints: 1inch = 25,4 mm, resistivity of aluminium = 2,825 x 10- 6 cm [8]
QUESTION 3
A dc shunt motor after running for several hours on constant mains of 350 V takes a field current
of 1,6 A. If the temperature rise is known to be 40°C, what value of extra circuit resistance is
required to adjust the field current to 1,6 A when starting from cold at 20°C?
The temperature coefficient of the motor’s armature material is 0,0043/K at 20°C.
[5]
QUESTION 4
4.2
Figure 8
QUESTION 5
7Ω
8Ω
11 Ω
[12]