Professional Documents
Culture Documents
SAES-L-410 PDF Download - Design of Pipelines
SAES-L-410 PDF Download - Design of Pipelines
COM
Search for...
This article is about SAES-L-410 which is about Design of Pipelines and download SAES-L-410 PDF for
piping and mechanical engineers, supervisors and project managers. This is saudi aramco standard based
on international codes and standards and useful for piping and mechanical engineering knowledge to get
job as engineers, QC Supervisors and QC managers, Engineering managers and technicians.
https://pdfyar.com/saes-l-410-pdf-download-design-of-pipelines-pdfyar-com/ 1/5
7/3/23, 4:55 PM SAES-L-410 PDF Download - Design of Pipelines - PDFYAR.COM
This standard SAES-L-410 provides additional requirements for the design of onshore and nearshore
pipelines, including cross-country pipelines, flowlines, and trunklines. It complements the design
requirements specified in ASME B31.4 and ASME B31.8 for pipelines.
While this standard is primarily intended for onshore and nearshore pipelines, it can also be applied to
submarine and offshore pipelines, excluding requirements that are not technically applicable in those
settings.
Furthermore, this standard is applicable to existing pipelines that are being converted from one specific
service to another type of service. For instance, it covers pipelines that are converted from stabilized oil to
sales gas, from sales gas to NGL (Natural Gas Liquids), and so on. These conversions involve modifying
the pipeline’s purpose and potentially its operational conditions, and the standard provides guidance for
such cases.
The pipeline optimization study is a crucial step in evaluating the technical and economic feasibility of a
new pipeline. The study should be conducted no later than the Project Proposal stage and should include a
comprehensive Life Cycle Cost Analysis. The following aspects should be addressed at a minimum:
a) Determining the appropriate pipe diameter, wall thickness, and material type and grade.
b) Evaluating the pipeline routing and selecting the optimal construction method (e.g., aboveground or
buried) considering their impact on initial capital costs, operation, and maintenance expenses.
d) Assessing the maximum allowable operating pressure, available inlet pressure, and minimum required
delivery pressure.
https://pdfyar.com/saes-l-410-pdf-download-design-of-pipelines-pdfyar-com/ 3/5
7/3/23, 4:55 PM SAES-L-410 PDF Download - Design of Pipelines - PDFYAR.COM
g) Determining the design flow rate and accounting for any velocity limitations imposed by the fluid
composition and flow pattern, especially for multi-phase fluids.
h) Selecting appropriate pipeline materials with consideration for potential corrosion and erosion effects
(refer to SAES-L-133).
It’s important to note that production pipelines in gas or crude may not always require a detailed pipeline
optimization study. In such cases, it is recommended to consult the Production & Facilities Development
Department of E&P, as they are responsible for the development of these pipelines and can provide
guidance.
Additionally, pipeline hydraulic studies should be conducted as needed, following the guidelines outlined in
SAEP-363, to ensure the hydraulic performance and integrity of the pipeline system.
Read Also:
Leave A Reply
Logged in as Zahid1078. Edit your profile. Log out? Required fields are marked *
Comment *
https://pdfyar.com/saes-l-410-pdf-download-design-of-pipelines-pdfyar-com/ 4/5
7/3/23, 4:55 PM SAES-L-410 PDF Download - Design of Pipelines - PDFYAR.COM
Post Comment
https://pdfyar.com/saes-l-410-pdf-download-design-of-pipelines-pdfyar-com/ 5/5