Professional Documents
Culture Documents
DX4S Change Log-2
DX4S Change Log-2
DX4S Change Log-2
Version 1.1
16 April 2013
Software Features
Added Motor on Axle (MOA) pre-set mix with graphic display to simplify setting up a mix for
crawlers with dual motors. Drive types (rear wheel, four wheel and front wheel) MOA is switch
selectable via a programmable switch plus throttle bias is available to adjust front to rear power
delivery on the fly.
A Graphic Steering mix that includes front, 4-wheel conventional, 4-wheel crab and rear steering
has been added. Steering type is selectable via a programmable switch.
Added indicators on the main screen to show the active MOA and 4WS modes and throttle bias
percent.
Software Corrections
Corrected minor fluctuations in the throttle and steering values on the monitor screen when the
backlight is on.
Aux channel positions are saved when the transmitter is powered off.
If the DX4S is bound to an SR3300T without any telemetry sensors connected, the temp
overheat warning will not be displayed.
Powered off issue has been corrected.
Box highlight correction in the brake Mix menu.
In the System -> About screen, the grouping of the S/N characters has been changed.