Professional Documents
Culture Documents
Oja Rem Catalogue in English
Oja Rem Catalogue in English
Automotive 81%
Electrical 7,2%
Auxiliary 5,2%
Lifts 3,6%
Domestic Appliances 1,4%
Energy 0,7%
Miscellaneous 0,9%
Processes
Oja-rem employees stand out for their quality, efficient and highly precise work. They
are a team capable of adapting to each and every customer and of guaranteeing
quality commitment at all times.
Engineering
We use the appropriate tool design and manufacturing techniques to mass produce
parts (usually in metal plate) which must be shaped on all edges by means of a press
pressure.
Stamping
We manufacture press shaped flat low steel parts. This technology enables the
manufacture of a wide variety of parts and sets with highly diverse configurations.
Depending on our customer’s needs, we offer a wide range of metal plate qualities
and thicknesses which enables us to achieve results pursuant to our customer’s
requirements. Oja-rem stamping capacity stands out for the use of new and modern
machinery, as well as international prestige trademarks. Presses from 100 to 500
tonnes in progressive, single or double effect die, within an average dimensional
range up to 700mm.
Welding
We place the most modern and avant-garde welding technology at our customer’s
disposal. We carry out computerised soldering and ERW to obtain the best results
on the parts and sets we manufacture.
Finishes
CONSTRUCTION
• ONA EDM.
• STANKOIMPORT Rectifier.
• GER Rectifier.
• 1 ARISA 500 T double block with 2500 * 1200 table and 800*6 feeder.
• 2 FAGOR 400 T double block with 2100 * 1200 table and 600*4 feeder.
• 1 FAGOR 250 T double block with 1800 * 1000 table and 400*3 feeder.
• 1 ARISA 250 T double block with 1800*1100 table and 400*3 feeder.
• 1 FAGOR 200 T double block with 1200 * 800 table and 400*2 feeder.
• 1 SEYI 300 T SERVO with 2580 * 1050 table and 600*6 feeder.
• 1 SEYI 500 T SERVO with 2980 * 1300 table and 850*6 feeder.
• 2 DELTECO 200 T.
WELDING
• 1 FANUC ARC MATE, MIG/MAG welding robotic unit, with two torches,
FRONIUS MTB500I 36º and a 2000 * 1200 MLEAN, 750kg rotary positioner.
• 1 FANUC ARC MATE 120lc, resistance welding robot, with two 170 kVA resistance
welding presses, and a GOCATOR 2040 type dimensional parts control, with a vision
system for nut verification.
FRANCE
TURKEY
HUNGARY
CZECH REPUBLIC
ROMANIA
POLAND
SLOVAKIA
GERMANY
THE NETHERLANDS
QUALITY
Quality & Environment Manager
Maitane Eguskiza
meguskiza@oja-rem.com
Metrologist
43.234803,-2.7649495 Serafin Urkiza
surkiza@oja-rem.com
Plant Manager
Gontzal Barredo
gbarredo@oja-re.com