Professional Documents
Culture Documents
B0505LS 1W Reicu
B0505LS 1W Reicu
B0505LS 1W Reicu
Features
RoHS compliant
Efficiency up to 80%
1.6kVDC Isolation
Single output
Short circuit protection( Suffix“R2”only SIP,optional)
Industry standard required 3
*All the specifications typical at Ta=+25℃ resistive load, nominal input voltage and rated output current unless otherwise noted.
Input Characteristics
Parameter Condition Min Typ Max Units
3.3V Input Models -0.7 6
5V Input Models -0.7 9
Input Surge Voltage (1 sec. Max.) VDC
12V Input Models -0.7 18
24V Input Models -0.7 30
Input Filter All Models Internal Capacitor
Output Characteristics
Parameter Condition Min Typ Max Units
Line regulation Vin change 1% +1.2 +1.5 %
Switching frequency Full load,nominal input 100 KHz
Load regulation 10%~100% load 6.5 15 %
Ripple and noise BW=DC to 20MHz 75 ≤100 mVp-p
Short circuit Protection Suffix“R2” Continuous,Automatic Recovery
Page 1 of 2
www.reicu.com
REV:3.1 E-mail:service@reicu.com
B****LS/LD-1W(R2) Series
General Characteristics
Parameter Condition Min Typ Max Units
Operating Temperature All output types -40 +85 ℃
Storage -55 +125 ℃
Storage humidity +95 %
Cooling Free air convection
Isolation voltage 1mA≤1minute 1600 VDC
Isolation resistance 500VDC 1000 MΩ
Switching Frequency 100 110 KHz
6
MTBF 3.5×10 K hours
Output Power(%)
100
+5% Ty p ic 85
al Loa 80
d L in e +2.5%
V NOM 60
-2.5%
40 Safe Operating Area
-7.5%
20
0
10 25 50 75 100 -40 0 40 80 120
Output load Current(%) Ambient Temperature(℃)
Note
1 .To ensure this module can operate efficinetly and reliably,During operation,the minimum output load is not less than 10% of the
full load.
2.Other input and output voltage may be available, please
3.Specifications subject to change without notice
19.60(0.772)
0.50(0.020)
9.50 0.30
(0.374) (0.012)
10.00 7.62 1 7
(Bottom View)
(0.394) (0.30)
4.10 14 9 8
0.50(0.020)
(0.161)
15.24(0.60)
Page 2 of 2
www.reicu.com
REV:3.1 E-mail:service@reicu.com