Professional Documents
Culture Documents
IDP-HEAT-W Detectors Datasheet
IDP-HEAT-W Detectors Datasheet
The point ID address, set using rotary decimal switches, provide specific detector
locations. The series includes a 135°F/57°C fixed temperature, rate-of-rise and a
190°F/88°C fixed high-temperature detectors. These thermal detectors provide
effective, intelligent property protection in a variety of applications.
F E AT U R E S & B E N E F I T S
• Sleek and stylish • High temperature • 360°-field viewing • Built-in functional test • Sealed against back
contemporary design model (IDP-HEAT- angle of the visual switch activated by pressure
W-HT) factory preset alarm indicators (two external magnet
• Advanced thermal • Plugs into separate
to 190°F (88°C) bi-color LEDs). LEDs
technology for fast • Walk test with address base for ease of
blink green in Normal
response • Addressable by device display (an address of installation and
condition and turn on
121 will blink the maintenance
• Fixed temperature • Two-wire SLC steady red in Alarm.
detector LED 12-
model (SK-HEAT-W) connection • SEMS screws for
• Integral (pause)-1)
factory preset to wiring of the separate
• Visible LEDs “blink” communications and
135°F (57°C) • Low standby current base
every time the unit is built-in device-type
• Rate-of-rise model addressed identification • Designed for • Optional remote,
(IDP-HEAT-W-ROR), directsurface or single- gang LED
• Built-in tamper- • Remote test feature
15°F (8.3°C) per electrical box accessory
resistant feature from the panel
minute mounting
APPLICATIONS INTELLIGENT BASES ACCESSORIES
Use thermal detectors for protection of B300-6: White, standard flanged CK300: Color Kit (includes cover and
property. For further information, refer to low-profile mounting base. trim ring), white, 10-Pack.
manual I56-6541, Applications Manual B300-6-BP: Bulk pack of B300-6, CK300-IV: Color Kit (includes cover and
for System Smoke Detectors, which package contains 10. trim ring), ivory, 10-Pack.
provides detailed information on B300-6-IV: Ivory, standard flanged CK300-BL: Color Kit (includes cover and
detector spacing, placement, zoning, low-profile mounting base. trim ring), black, 10-Pack.
wiring, and special applications.
B501-WHITE: White, standard European M02-04-01: Detector test magnet.
flangeless mounting base. UL listed. M02-09-00: Telescoping test magnet.
INSTALLATION
B501-BL: Black, standard European RA100Z: Remote LED annunciator
The IDP-HEAT-W Series plug-in
flangeless mounting base. UL listed. SMB600: Surface Mounting Kit
detectors use a separate base to simplify
B501-IV: Ivory, standard European (flanged).
installation, service, and maintenance.
flangeless mounting base. UL listed. TR300: Replacement trim ring for B300-
Installation instructions are shipped with
each detector. B200S-WH: White, Intelligent, 6, white.
programmable sounder base. TR300-IV: Replacement trimring for
Mount base (all base types) on an B200S-IV: Ivory, Intelligent, B300-6-IV, ivory.
electrical backbox which is at least 1.5" programmable sounder base.
(3.81 cm) deep. B200SR-WH: White, Intelligent sounder
base for retrofit applications.
NOTE:
B200SR-IV: Ivory, Intelligent sounder
• Because of the inherent supervision
base for retrofit applications.
provided by the SLC loop, end-of-line
B200S-LF-WH: White, Low Frequency
resistors are not required. Wiring “T-taps”
Intelligent, programmable sounder base.
or branches are permitted for Style 4
B200S-LF-IV: Ivory, Low Frequency
(Class “B”) wiring.
Intelligent, programmable sounder base.
• When using relay or sounder bases, B200SR-LF-WH: White, Low Frequency
consult the installation sheet for device Intelligent sounder base for retrofit
limitations between isolator modules applications.
and isolator bases. B200SR-LF-IV: Ivory, Low Frequency
Intelligent sounder base for retrofit
ORDERING INFORMATION applications.
Note: Detectors must be mounted to one
of the Intelligent Bases listed below. B224RB-WH: White, plug-in System
IDP-HEAT-W: White, low-profile Sensor relay base.
intelligent 135°F fixed thermal sensor.
B224RB-IV: Ivory, plug-in System
Must be mounted to one of the bases listed
below. Sensor relay base.
IDP-HEAT-IV: Ivory, low-profile intelligent B224BI-WH: White, plug-in System
135°F fixed thermal sensor. Must be
mounted to one of the bases listed below. Sensor isolator detector base.
IDP-HEAT-ROR-W: White, low-profile B224BI-IV: Ivory, plug-in System Sensor
intelligent rateof- rise thermal sensor. Must
isolator detector base.
be mounted to one of the bases listed
below.
IDP-HEAT-ROR-IV: Same as IDP-HEAT-
ROR-W, but in Ivory.
IDP-HEAT-HT-W: White, low-profile
intelligent 190°F fixed thermal sensor.
Must be mounted to one of the bases listed
below
IDP-HEAT-HT-IV: Ivory, low-profile
intelligent 190°F thermal sensor. Must be
mounted to one of the bases listed below.
Farenhyt IDP-HEAT-W Series Technical Specifications
PHYSICAL COMPATIBILITY For a complete listing of all
compliance approvals and
Height: 2.0" (51mm) installed in B300-6 base The IDP-HEAT-W series detectors are certifications, please visit
compatible with the following Farenhyt Series www.farenhyt.com.
Diameter: 6.2" (156mm) installed in B300-6
base 4.1" (104 mm) installed in B501 base FACPs: Microsoft, Windows, and
the Windows Logo are
Weight: 3.4 oz (95 g) • IFP-2100 / IFP-2100ECS / RFP-2100 registered trademarks
or trademarks of
ENVIRONMENTAL • IFP-2000 / IFP-2000ECS / RPS-2000 Microsoft Corporation.
Honeywell Farenhyt
12 Clintonville Road
Northford, CT 06472 Doc 351630 | Rev A| 04/18
800-328-0103 © 2018 Honeywell International Inc.